Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Alpine Store
  3. Discontinued Alpine Car Audio & Electronics
  4. Discontinued Alpine Car Amplifiers
  5. Discontinued Alpine All Car Amplifiers

Discontinued All Alpine Car Amplifiers

Explore the full range of Alpine amplifiers for any audio system.

Filters
Alpine ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Alpine MRV-M250 Amplifier + Free Amp Kit

250W Mono Block V-Power Class D Subwoofer Car Amplifier

MRV-M250, BAK82 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-M250 Amplifier + Free Amp Kit

250W Mono Block V-Power Class D Subwoofer Car Amplifier

• RMS Power: 150W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H

100

• RMS Power: 150W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H

Alpine KTA-30FW

600W Peak (300W RMS) Class D Power Pack Series 4 Channel Marine and Powersports Amplifier

KTA-30FW big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine KTA-30FW

600W Peak (300W RMS) Class D Power Pack Series 4 Channel Marine and Powersports Amplifier

• 75 watts x 4 channel @ 4 ohm
• 75 watts x 4 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable 4-Channel Amplifier

VIP Star Icon

VIP Product Get $50.00 in rewards to spend later

• 75 watts x 4 channel @ 4 ohm
• 75 watts x 4 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable 4-Channel Amplifier

Alpine MRV-V500

500W Max (490W RMS) V-Power Series 4 ohm Stable 5-Channel Class-D Amplifier w/ Remote Level Control

MRV-V500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-V500

500W Max (490W RMS) V-Power Series 4 ohm Stable 5-Channel Class-D Amplifier w/ Remote Level Control

• RMS: 40W x 4 + 150W x 1 @ 4 ohm, 60W x 4 + 250W x 1 @ 2 ohm
• Total RMS Power: 490 watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs
• 3-way protection circuitry

3

• RMS: 40W x 4 + 150W x 1 @ 4 ohm, 60W x 4 + 250W x 1 @ 2 ohm
• Total RMS Power: 490 watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs
• 3-way protection circuitry

Alpine MRV-M1200

2400W Peak (1200W RMS) Class-D Monoblock Amplifier with Remote Bass Knob Included

MRV-M1200 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-M1200

2400W Peak (1200W RMS) Class-D Monoblock Amplifier with Remote Bass Knob Included

• 600 Watts RMS x 1 @ 4 ohm
• 1200 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2400 Watts
• CEA-2006 Compliant
• 40% smaller footprint than its predecessors
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• 13-1/2"W x 2-1/4"L x 8-5/8"H

4

• 600 Watts RMS x 1 @ 4 ohm
• 1200 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2400 Watts
• CEA-2006 Compliant
• 40% smaller footprint than its predecessors
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• 13-1/2"W x 2-1/4"L x 8-5/8"H

Alpine PDX-M12

1200W RMS PDX Series Monoblock Power Density Class D Digital Car Amplifier

PDX-M12 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-M12

1200W RMS PDX Series Monoblock Power Density Class D Digital Car Amplifier

• RMS: 1200W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• 6-Layer Glass Epoxy PC Board and Compact Size
• Thermal Protection Circuitry
• Dimensions: 7-9/16"D x 10-1/8"W x 2"H

21

• RMS: 1200W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• 6-Layer Glass Epoxy PC Board and Compact Size
• Thermal Protection Circuitry
• Dimensions: 7-9/16"D x 10-1/8"W x 2"H

Alpine KTP-190U

90W RMS Monoblock KTP Series Class D Amplifier

KTP-190U big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine KTP-190U

90W RMS Monoblock KTP Series Class D Amplifier

• RMS Power: 30W x 1 @ 4 ohm, 60W x 1 @ 2 ohm, 90W x 1 @ 1 ohm
• Total Peak Power: 190W
• Selectable Low Pass Filter
• Dimensions: 5-3/8" W x 2-5/8" D x 1-9/16" H

3

• RMS Power: 30W x 1 @ 4 ohm, 60W x 1 @ 2 ohm, 90W x 1 @ 1 ohm
• Total Peak Power: 190W
• Selectable Low Pass Filter
• Dimensions: 5-3/8" W x 2-5/8" D x 1-9/16" H

Alpine MRV-M250

250W Mono Block V-Power Class D Subwoofer Car Amplifier

MRV-M250 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-M250

250W Mono Block V-Power Class D Subwoofer Car Amplifier

• RMS Power: 150W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H

3

• RMS Power: 150W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H

Alpine MRP-M500

500W RMS Class D Monoblock Amplifier

MRP-M500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRP-M500

500W RMS Class D Monoblock Amplifier

bull; 300W x 1 chan. @ 4 ohm
• 500W x 1 chan. @ 2 ohm
• 1000W x 1 chan. Max approx.
• MOSFET Power supply
• Bass EQ 0-12dB at 50Hz
• Continuously adjustable gain control
• Thermal management control

76

bull; 300W x 1 chan. @ 4 ohm
• 500W x 1 chan. @ 2 ohm
• 1000W x 1 chan. Max approx.
• MOSFET Power supply
• Bass EQ 0-12dB at 50Hz
• Continuously adjustable gain control
• Thermal management control

Alpine PDX-F6 Open Box, Accepatble Condition (Used)

600W PDX Series 4-Channel Power Density Digital Class D Car Amplifier(Open Box Complete Used Functional)

PDX-F6 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-F6 Open Box, Accepatble Condition (Used)

600W PDX Series 4-Channel Power Density Digital Class D Car Amplifier(Open Box Complete Used Functional)

• Item Condition: Open Box
• RMS Power: 150W x 4-Chan. @ 4 ohm
• 600 Watts RMS
• Class D
• Variable High-Pass and Low-Pass Filter
• Blue LED Power/Status Indicator
• Compact Size

• Item Condition: Open Box
• RMS Power: 150W x 4-Chan. @ 4 ohm
• 600 Watts RMS
• Class D
• Variable High-Pass and Low-Pass Filter
• Blue LED Power/Status Indicator
• Compact Size

Alpine PDR-M65

650W RMS PDR Series Monoblock Class D Amplifier

PDR-M65 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDR-M65

650W RMS PDR Series Monoblock Class D Amplifier

• RMS Power: 450W x 1 @ 4 ohm, 650W x 1 @ 2 ohm
• 1 Pair of Preamp Outputs
• Low Pass Filter
• Dimensions: 9" W x 7-1/8" D x 2-1/16" H

1

• RMS Power: 450W x 1 @ 4 ohm, 650W x 1 @ 2 ohm
• 1 Pair of Preamp Outputs
• Low Pass Filter
• Dimensions: 9" W x 7-1/8" D x 2-1/16" H

Alpine MRP-F300

300W V-Power Series 4-Channel Class AB Car Amplifier

MRP-F300 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRP-F300

300W V-Power Series 4-Channel Class AB Car Amplifier

• 50W x 4 chan. @ 4 ohm • 75W x 4 chan. @ 2 ohm • 150W x 4 chan. Max • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Non-Fading pre-amp output • Thermal management control • 4/3/2 Channel design

18

• 50W x 4 chan. @ 4 ohm • 75W x 4 chan. @ 2 ohm • 150W x 4 chan. Max • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Non-Fading pre-amp output • Thermal management control • 4/3/2 Channel design

Alpine MRX-M110

1100W RMS Monoblock Class D X-Power Series Car Amplifier

MRX-M110 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRX-M110

1100W RMS Monoblock Class D X-Power Series Car Amplifier

• RMS: 650W x 1 @ 4 ohm, 1100W x 1 @ 2 ohm
• Total RMS Power: 1100W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB at 50 Hz
• Multi-Stage Power Management Circuit
• Dimensions: 9"L x 13-3/8"W x 2-1/4"H

9

• RMS: 650W x 1 @ 4 ohm, 1100W x 1 @ 2 ohm
• Total RMS Power: 1100W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB at 50 Hz
• Multi-Stage Power Management Circuit
• Dimensions: 9"L x 13-3/8"W x 2-1/4"H

Alpine MRV-M250 Monoblock Amplifier + Complete 8 AWG OFC Amp Kit

250W Mono Block V-Power Class D Subwoofer Car Amplifier + Amp Kit

MRV-M250_XKIT82 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-M250 Monoblock Amplifier + Complete 8 AWG OFC Amp Kit

250W Mono Block V-Power Class D Subwoofer Car Amplifier + Amp Kit

• RMS Power: 150W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H
• 8 Gauge 2-Channel Complete Amplifier Installation Kit

63

• RMS Power: 150W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H
• 8 Gauge 2-Channel Complete Amplifier Installation Kit

Alpine KTP-445U Open Box Complete

Universal Class D 4-Channel Head Unit Power Pack for Use with all Aftermarket & Factory Receivers

KTP-445U big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine KTP-445U Open Box Complete

Universal Class D 4-Channel Head Unit Power Pack for Use with all Aftermarket & Factory Receivers

• Item Condition: Open Box Complete
• RMS Power: 45W x 4-Chan. @ 4 Ohm
• Adjustable Gain Switch
• Plug-and-Play
• CEA-2006 Compliant

• Item Condition: Open Box Complete
• RMS Power: 45W x 4-Chan. @ 4 Ohm
• Adjustable Gain Switch
• Plug-and-Play
• CEA-2006 Compliant

Alpine BBX-F1200 (open box complete)

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

BBX-F1200 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine BBX-F1200 (open box complete)

600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier

• 50 Watts RMS x 4 @ 4 ohm
• 70 Watts RMS x 4 @ 2 ohm
• 130 Watts RMS x 2 @ 4 ohm
• Total Peak Power: 600 Watts
• High and Low Pass Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.4" W x 12.9" L x 2" H

10

• 50 Watts RMS x 4 @ 4 ohm
• 70 Watts RMS x 4 @ 2 ohm
• 130 Watts RMS x 2 @ 4 ohm
• Total Peak Power: 600 Watts
• High and Low Pass Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 9.4" W x 12.9" L x 2" H

Alpine MRV-F300 OPEN BOX COMPLETE

300W 4-Channel Class D V-Power Series Compact Car Amplifier

MRV-F300 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-F300 OPEN BOX COMPLETE

300W 4-Channel Class D V-Power Series Compact Car Amplifier

Opened and Never Installed
• RMS Power: 50W x 4-Chan. @ 4 ohm, 75W x 4-Chan. @ 2 ohm
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Same Power in a 40% Smaller Chassis

Opened and Never Installed
• RMS Power: 50W x 4-Chan. @ 4 ohm, 75W x 4-Chan. @ 2 ohm
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Same Power in a 40% Smaller Chassis

Alpine PDX-F4

400W PDX Series 4-Channel Power Density Digital Class D Car Amplifier

PDX-F4 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-F4

400W PDX Series 4-Channel Power Density Digital Class D Car Amplifier

• RMS Power: 100W x 4-Chan. @ 4 ohm
• 400 Watts RMS
• Class D
• Variable High-Pass and Low-Pass Filter
• Blue LED Power/Status Indicator
• Compact Size

19

• RMS Power: 100W x 4-Chan. @ 4 ohm
• 400 Watts RMS
• Class D
• Variable High-Pass and Low-Pass Filter
• Blue LED Power/Status Indicator
• Compact Size

Alpine MRX-F35

340W 4-Channel X Power Series Car Amplifier

MRX-F35 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRX-F35

340W 4-Channel X Power Series Car Amplifier

• RMS Power: 55W x 4-Chan. @ 4 Ohm, 85W x 4-Chan. @ 2 Ohm
• Variable Low-Pass Crossover
• Variable High-Pass Crossover
• Variable Bass Boost

1

• RMS Power: 55W x 4-Chan. @ 4 Ohm, 85W x 4-Chan. @ 2 Ohm
• Variable Low-Pass Crossover
• Variable High-Pass Crossover
• Variable Bass Boost

Alpine KTP-445

Plug and Play Head Unit Power Pack for Use with all 2005-Up Alpine Head Units (Black Harness)

KTP-445 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine KTP-445

Plug and Play Head Unit Power Pack for Use with all 2005-Up Alpine Head Units (Black Harness)

Power Pack 4-Channel Class D for Select Alpine In-Dash Receivers • 45W x 4 Chan. @ 4 Ohm • Adjustable Gain Switch • Plug-and-Play • CEA-2006 Compliant

16

Power Pack 4-Channel Class D for Select Alpine In-Dash Receivers • 45W x 4 Chan. @ 4 Ohm • Adjustable Gain Switch • Plug-and-Play • CEA-2006 Compliant

Alpine MRX-M55

550W RMS Monoblock Class D X-Power Series Car Amplifier

MRX-M55 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRX-M55

550W RMS Monoblock Class D X-Power Series Car Amplifier

• RMS: 350W x 1 @ 4 ohm, 550W x 1 @ 2 ohm
• Total RMS Power: 550W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB at 50 Hz
• Multi-Stage Power Management Circuit
• Dimensions: 9"L x 9-7/8"W x 2-1/4"H

2

• RMS: 350W x 1 @ 4 ohm, 550W x 1 @ 2 ohm
• Total RMS Power: 550W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB at 50 Hz
• Multi-Stage Power Management Circuit
• Dimensions: 9"L x 9-7/8"W x 2-1/4"H

1 2 3 4 5 Next

Items per page: 20 40 60

    Clear all

    Alpine All Car Amplifiers Information

    All car amplifiers from Alpine are built from highly durable materials and with quality in mind. With various power ratings and max power output, Alpine has a wide array of options to suit your system. When thinking of car amplifiers, think Alpine.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage

    Add vehicle
    2 | Make
    3 | Model
    Why Use a Vehicle Fit Guide?
    Where to find vehicle info | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.
    2 | Make
    3 | Model
    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo