Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Alpine Store
  3. Discontinued Alpine Car Audio & Electronics
  4. Discontinued Alpine Car Amplifiers
  5. Discontinued Alpine Monoblock Amplifiers

Discontinued Alpine Monoblock Amplifiers

Power your bass with Alpine's monoblock amplifiers, designed for deep, resonant sound.

Match Amps to Subs
Filters
Alpine ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Find compatible amplifiers for subs you own or want with our powerful AmpliFinder® tool.

Match Amps to Subs

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Alpine PDX-1.600

600 watts, Class D Monoblock Power Density Digital Amplifier (PDX1.600)

PDX-1.600 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-1.600

600 watts, Class D Monoblock Power Density Digital Amplifier (PDX1.600)

Class D Monoblock Power Density Digital Amplifier • 600 watts RMS x 1 at 2/4 ohm • CEA-2006 compliant • MOSFET power and output stages • Frequency Response: 20 Hz - 200 Hz

5

Class D Monoblock Power Density Digital Amplifier • 600 watts RMS x 1 at 2/4 ohm • CEA-2006 compliant • MOSFET power and output stages • Frequency Response: 20 Hz - 200 Hz

Alpine MRP-M850

800 watts, Class D MonoBlock Amplifier

MRP-M850 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRP-M850

800 watts, Class D MonoBlock Amplifier

800 watts, Class D MonoBlock Amplifier • RMS Power Output: 4 ohm: 500 watts x 1 / 2 ohm: 800 watts x 1 • Frequency Response: 20 Hz - 200 Hz • MOSFET power supply • STAR Topology (minimizes internal noise and prevents ground interference) • Speaker and preamp-level inputs

5

800 watts, Class D MonoBlock Amplifier • RMS Power Output: 4 ohm: 500 watts x 1 / 2 ohm: 800 watts x 1 • Frequency Response: 20 Hz - 200 Hz • MOSFET power supply • STAR Topology (minimizes internal noise and prevents ground interference) • Speaker and preamp-level inputs

Alpine MRV-M250 (Open Box)

250W Mono Block V-Power Class D Subwoofer Car Amplifier

MRV-M250 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-M250 (Open Box)

250W Mono Block V-Power Class D Subwoofer Car Amplifier

• Item Condition: Open Box, Like New
• RMS Power: 150W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H

3

• Item Condition: Open Box, Like New
• RMS Power: 150W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H

EXCLUSIVE

Alpine + NVX 450 Watt RMS Bass Bundle

(2) Alpine SWS-10D2 Type-S 10" Subwoofer + NVX BDA7501 Monoblock Class D Amplifier + 100% OFC Amp Wiring Kit

2-SWS-10D4_BDA7501_XKIT42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine + NVX 450 Watt RMS Bass Bundle

(2) Alpine SWS-10D2 Type-S 10" Subwoofer + NVX BDA7501 Monoblock Class D Amplifier + 100% OFC Amp Wiring Kit

• 450W x 1 @ 4 ohm
• Dual 2-Ohm Voice Coil
• Kevlar Treated Pulp Cone
• Durable HAMR Santoprene™ Surround
• CEA-2006 Compliant
• Dimensions: 7" W x 9.75" L x 2" H
• Silver-Tinned 100% Virgin Copper
• 2-channel RCA Interconnect Cable

• 450W x 1 @ 4 ohm
• Dual 2-Ohm Voice Coil
• Kevlar Treated Pulp Cone
• Durable HAMR Santoprene™ Surround
• CEA-2006 Compliant
• Dimensions: 7" W x 9.75" L x 2" H
• Silver-Tinned 100% Virgin Copper
• 2-channel RCA Interconnect Cable

EXCLUSIVE

2000 Watt Dual 12" Alpine Type-R + Hifonics Bass Bundle

List price $1249.89: (2) Alpine SWR-12D2 12" Type-R Dual 2 ohm Subwoofers + Hifonics BRX2400.1D Brutus Series Class-D Monoblock Subwoofer Amplifier

BRX2400.1D_2-SWR-12D2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

2000 Watt Dual 12" Alpine Type-R + Hifonics Bass Bundle

List price $1249.89: (2) Alpine SWR-12D2 12" Type-R Dual 2 ohm Subwoofers + Hifonics BRX2400.1D Brutus Series Class-D Monoblock Subwoofer Amplifier

• 1990W x 1 @ 2 ohm Dynamic Power
• Dual 2-Ohm Voice Coil
• Kevlar Treated Pulp Cone
• Durable HAMR Santoprene™ Surround
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 45 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 18-11/16"L x 10-5/16"W x 2-1/2"H

1

• 1990W x 1 @ 2 ohm Dynamic Power
• Dual 2-Ohm Voice Coil
• Kevlar Treated Pulp Cone
• Durable HAMR Santoprene™ Surround
• CEA-2006 Compliant
• Bass Boost: 0-10 dB at 45 Hz
• Aluminum Alloy Heatsink with Illuminated Hifonics Logo
• Dimensions: 18-11/16"L x 10-5/16"W x 2-1/2"H

Alpine MRV-M500

500W RMS Class D V-Power Series Monoblock Car Amplifier

MRV-M500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-M500

500W RMS Class D V-Power Series Monoblock Car Amplifier

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

VIP Star Icon

VIP Product Get $20.00 in rewards to spend later

55

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

Alpine MRP-M2000

2000W RMS, Class D Monoblock Amplifier

MRP-M2000 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRP-M2000

2000W RMS, Class D Monoblock Amplifier

V Power Series Class D Monoblock Car Amplifier • 600W x 1 chan. @ 4 ohm • 2000W x 1 chan. @ 2 ohm • 4000W x 1 chan. Max approx. • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Continuously adjustable gain control • Thermal management control

12

V Power Series Class D Monoblock Car Amplifier • 600W x 1 chan. @ 4 ohm • 2000W x 1 chan. @ 2 ohm • 4000W x 1 chan. Max approx. • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Continuously adjustable gain control • Thermal management control

Alpine MRV-M500-OPEN BOX

500W V-Power Series Class D Monoblock Digital Amplifier

MRV-M500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-M500-OPEN BOX

500W V-Power Series Class D Monoblock Digital Amplifier

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H

EXCLUSIVE

12" Alpine Type-R + JBL Monoblock Amplifier

List price $639.90: Alpine SWR-12D4 12" Type-R Series Dual 4-ohm Subwoofer + JBL GTO-751EZ 750W RMS Monoblock Class D Car Amplifier

SWR-12D4_GTO-751EZ big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

12" Alpine Type-R + JBL Monoblock Amplifier

List price $639.90: Alpine SWR-12D4 12" Type-R Series Dual 4-ohm Subwoofer + JBL GTO-751EZ 750W RMS Monoblock Class D Car Amplifier

• 750W x 1 @ 2 ohm
• CEA-2006 Compliant
• Easy Level-Setup CD
• Reinforced parabolic cone structure
• Durable High Amplitude Multi-Roll santoprene surround
• Cast aluminum frame with integral shorting sleeve
• High-grade strontium ferrite segmented magnet assembly
• Integrated 8 AWG push terminals with VC jumpers
• Variable Bass Boost: 0 to +12 dB
• Class D Circuitry
• Dimensions: 9-11/16"W x 12"L x 2-5/8"H

• 750W x 1 @ 2 ohm
• CEA-2006 Compliant
• Easy Level-Setup CD
• Reinforced parabolic cone structure
• Durable High Amplitude Multi-Roll santoprene surround
• Cast aluminum frame with integral shorting sleeve
• High-grade strontium ferrite segmented magnet assembly
• Integrated 8 AWG push terminals with VC jumpers
• Variable Bass Boost: 0 to +12 dB
• Class D Circuitry
• Dimensions: 9-11/16"W x 12"L x 2-5/8"H

Alpine MRV-M1200 Open Box (Complete)

2400W Peak (1200W RMS) Class-D Monoblock Amplifier with Remote Bass Knob Included

MRV-M1200 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-M1200 Open Box (Complete)

2400W Peak (1200W RMS) Class-D Monoblock Amplifier with Remote Bass Knob Included

• 600 Watts RMS x 1 @ 4 ohm
• 1200 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2400 Watts
• CEA-2006 Compliant
• 40% smaller footprint than its predecessors
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• 13-1/2"W x 2-1/4"L x 8-5/8"H

4

• 600 Watts RMS x 1 @ 4 ohm
• 1200 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2400 Watts
• CEA-2006 Compliant
• 40% smaller footprint than its predecessors
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• 13-1/2"W x 2-1/4"L x 8-5/8"H

Alpine MRP-M500 Open Box

(Open Box) 500W RMS, Class D Monoblock Amplifier

MRP-M500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRP-M500 Open Box

(Open Box) 500W RMS, Class D Monoblock Amplifier

V Power Series Class D Monoblock Car Amplifier • 300W x 1 chan. @ 4 ohm • 500W x 1 chan. @ 2 ohm • 1000W x 1 chan. Max approx. • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Continuously adjustable gain control • Thermal management control

V Power Series Class D Monoblock Car Amplifier • 300W x 1 chan. @ 4 ohm • 500W x 1 chan. @ 2 ohm • 1000W x 1 chan. Max approx. • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Continuously adjustable gain control • Thermal management control

Alpine PDX-1.1000 R/B

(MISSING ACCESSORIES) FACTORY REFURBISHED

PDX-1.1000 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-1.1000 R/B

(MISSING ACCESSORIES) FACTORY REFURBISHED

Class D Monoblock Subwoofer Amplifier • 1000W x 1 chan. @ 4 Ohm • stackable installation design • MOSFET power supply • adjustable gain control • RCA inputs • CEA-2006 compliant • speaker connectors

Class D Monoblock Subwoofer Amplifier • 1000W x 1 chan. @ 4 Ohm • stackable installation design • MOSFET power supply • adjustable gain control • RCA inputs • CEA-2006 compliant • speaker connectors

EXCLUSIVE

Alpine + Image Dynamics High Fidelity Subwoofer Solution

Alpine SWR-12D2 12" Type-R Subwoofer + Image Dynamics Q1200.1 Q Series Monoblock Car Amplifier + NVX XKIT42 Premium Amp Kit

SWR-12D2_Q1200.1_XKIT42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine + Image Dynamics High Fidelity Subwoofer Solution

Alpine SWR-12D2 12" Type-R Subwoofer + Image Dynamics Q1200.1 Q Series Monoblock Car Amplifier + NVX XKIT42 Premium Amp Kit

• 1 ohm: 1200 watts x 1 chan.
• Dual 2-Ohm Voice Coil
• Kevlar Treated Pulp Cone
• Durable HAMR Santoprene™ Surround
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H

149

• 1 ohm: 1200 watts x 1 chan.
• Dual 2-Ohm Voice Coil
• Kevlar Treated Pulp Cone
• Durable HAMR Santoprene™ Surround
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H

Alpine MRX-M50 Open Box

Open Box 500W RMS, Monoblock Class D X-Power Series Car Amplifier

MRX-M50 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRX-M50 Open Box

Open Box 500W RMS, Monoblock Class D X-Power Series Car Amplifier

MRX Series Monoblock Car Amplifier • 300W RMS @ 4 Ohm x 1 Chan. • 500W RMS @ 2 Ohm x 1 Chan. • 300W RMS @ 1 Ohm x 1 Chan. • Variable Low-Pass Crossover • Variable Subsonic Crossover • Variable Bass Boost

MRX Series Monoblock Car Amplifier • 300W RMS @ 4 Ohm x 1 Chan. • 500W RMS @ 2 Ohm x 1 Chan. • 300W RMS @ 1 Ohm x 1 Chan. • Variable Low-Pass Crossover • Variable Subsonic Crossover • Variable Bass Boost

Alpine MRX-M110 OPEN BOX COMPLETE

1100W RMS Monoblock Class D X-Power Series Car Amplifier

MRX-M110 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRX-M110 OPEN BOX COMPLETE

1100W RMS Monoblock Class D X-Power Series Car Amplifier

Opened and Never Installed
• RMS: 650W x 1 @ 4 ohm, 1100W x 1 @ 2 ohm
• Total RMS Power: 1100W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB at 50 Hz
• Multi-Stage Power Management Circuit
• Dimensions: 9"L x 13-3/8"W x 2-1/4"H

Opened and Never Installed
• RMS: 650W x 1 @ 4 ohm, 1100W x 1 @ 2 ohm
• Total RMS Power: 1100W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB at 50 Hz
• Multi-Stage Power Management Circuit
• Dimensions: 9"L x 13-3/8"W x 2-1/4"H

Alpine PDX-M12 R/B

Refurbished 1200W RMS, PDX Series Monoblock Power Density Digital Amplifier

PDX-M12 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-M12 R/B

Refurbished 1200W RMS, PDX Series Monoblock Power Density Digital Amplifier

PDX Series 1-Channel Car Amplifier • Class D • 1200 Watts RMS • 1200 Watts x 1 Chan. RMS • Variable Low-Pass Filter • Blue LED Power/Status Indicator • RCA Pre-out Jacks • Compact Size

1

PDX Series 1-Channel Car Amplifier • Class D • 1200 Watts RMS • 1200 Watts x 1 Chan. RMS • Variable Low-Pass Filter • Blue LED Power/Status Indicator • RCA Pre-out Jacks • Compact Size

Alpine MRP-M350 R/B

FACTORY REFURBISHED (DISPLAY UNIT)

MRP-M350 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRP-M350 R/B

FACTORY REFURBISHED (DISPLAY UNIT)

MonoBlock Subwoofer Amplifier • 350 watts RMS x 1 @ 2 ohm • MOSFET power supply

MonoBlock Subwoofer Amplifier • 350 watts RMS x 1 @ 2 ohm • MOSFET power supply

EXCLUSIVE

Alpine + NVX High Performance Bass Bundle

(2) Alpine SWR-10D2 10" Type-R Subwoofer + NVX XPLD3K True 3000W RMS Class-D Monoblock Amplifier + 100% OFC Amp Wiring Kit

2-SWR-10D2_XPLD3K_XKIT02 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine + NVX High Performance Bass Bundle

(2) Alpine SWR-10D2 10" Type-R Subwoofer + NVX XPLD3K True 3000W RMS Class-D Monoblock Amplifier + 100% OFC Amp Wiring Kit

• 1900W x 1 @ 2 ohm
• 300 - 1000W RMS
• Dual 2-Ohm Voice Coil
• Kevlar Treated Pulp Cone
• Durable HAMR Santoprene™ Surround
• CEA-2006 Compliant
• Wired Bass Remote Included
• Ultra Efficient Class D Design
• For Car Audio Systems Over 1000 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 2-channel RCA Interconnect Cable

• 1900W x 1 @ 2 ohm
• 300 - 1000W RMS
• Dual 2-Ohm Voice Coil
• Kevlar Treated Pulp Cone
• Durable HAMR Santoprene™ Surround
• CEA-2006 Compliant
• Wired Bass Remote Included
• Ultra Efficient Class D Design
• For Car Audio Systems Over 1000 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 2-channel RCA Interconnect Cable

Alpine MRP-M1000 Open Box

Open Box, 1000W RMS, Class D Monoblock Amplifier

MRP-M1000 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRP-M1000 Open Box

Open Box, 1000W RMS, Class D Monoblock Amplifier

V-Power Series Class D Monoblock Car Amplifier • 600W x 1 chan. @ 4 ohm • 1000W x 1 chan. @ 2 ohm • 2000W x 1 chan. Max approx. • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Continuously adjustable gain control • Thermal management control

V-Power Series Class D Monoblock Car Amplifier • 600W x 1 chan. @ 4 ohm • 1000W x 1 chan. @ 2 ohm • 2000W x 1 chan. Max approx. • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Continuously adjustable gain control • Thermal management control

Alpine PDX-M12-OPEN BOX

1200W RMS, PDX Series Monoblock Power Density Digital Amplifier

PDX-M12 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-M12-OPEN BOX

1200W RMS, PDX Series Monoblock Power Density Digital Amplifier

• RMS: 1200W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• 6-Layer Glass Epoxy PC Board and Compact Size
• Thermal Protection Circuitry
• Dimensions: 7-9/16"D x 10-1/8"W x 2"H

• RMS: 1200W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• Total RMS Power: 1200W
• CEA-2006 Compliant
• 6-Layer Glass Epoxy PC Board and Compact Size
• Thermal Protection Circuitry
• Dimensions: 7-9/16"D x 10-1/8"W x 2"H

Prev 1 2 3 4 5 Next

Items per page: 20 40 60

    Clear all

    Alpine Monoblock Amplifiers Information

    The Alpine monoblock amplifiers are designed for efficient power ouput. These amps take up little space and feature high quality platinum finished connections, and solid power ratings. You won't be disappointed with your Alpine monoblock amplifier for your vehicle's needs.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2011 Chrysler 200

    1994 Lexus SC400

    1987 Ford LTD Crown

    1984 Ford Thunderbird

    2019 Ford Flex

    1992 Isuzu Stylus

    1995 Eagle Vision

    2005 Saturn ION

    2000 Daewoo Lanos

    1954 Chrysler Windsor

    Vehicle
    Store     Delete

    2000 Harley Davidson FXST Softail Standard

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2011 200
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo