Belva BB2000D

So far so good.

I needed a new amp to power my AudioPipe BD3 12, it was on a 2channel Oxygen Audio amp that only did 600w @ 2ohms. The best it could do was 1200rms bridged @ 4ohms. Anyway, I needed a "budget" amp that could push some more power. I have it wired to 2ohms and it sounds noticeably better. I've only had it for a dew days so I can't speak for longevity, but price for power rationis definitely on point.
The only bad thing I can speak on so far is the bass remote. The minute I plugged it in I got a loud feedback and noise from my sub and it froze. Idk whatn the hell that was about, but I just stayed with the bass remote from my active xover. Because of very mixed reviews In was sure to buy the warranty plan for this amp. Rather be safe than sorry.

not quite 2000 rms

Wired to 1 ohm on the scope I can see more like 1300 before this amp clips. Overall totally worth the money sound is clean have not put it in protect yet nor cooked it. Right now its pushing a pair of infinity 12s hard enough to flex every panel in the car including the hood. Would like another one for my truck due to its small size. Too bad it doesnt take bigger than 4ga wire....

Best Cheap amp

This in my opinion is the best of the amps...It will definitely flex stuff if you have the right sub and box combo!!!

Holy moly!

Wowzers, I purchased an open box version and when it arrived I was stunned at the build quality. I researched this amp extensively before purchasing, clamp videos and forums, I STILL didn't expect such superb quality from an amplifier so inexpensive.

On par with $300 amplifiers such as Sundown,DC,Crescendo etc... etc... but at a fraction of the cost. Now obviously this isn't a $300 amplifier so it isn't going to put out much more than rated RMS, but considering it is CEA-2006 certified and has a few clamped/O-scoped videos on youtube doing approx rated power its pretty darn good.

Sucker is heavy compared to "mainstream" amps like Kicker,Pioneer,Sony. Bass remote is excellent quality as well, even the remote CORD is high quality.

One of the secondary reasons for picking this amplifier was the Bass boost EQ (30-80hz adjustable), no other amplifiers in this price range have it, Unless you want to spend $250+.

It was a tough decision between this and the Hifonics line of CEA-2006 models. I'm very content with my choice.

I guess it works?

Bought this amp to power my Audiopipe BD3-12 and a week in, my sub is dead. The amp definitely powered it better than the OxygenAudio amp that was only doing 600w RMS @2ohms. Its wired with 4 guage Ground and P+. I went through the whole tuning with a 50hz wave and set my gains with a DMM at 41volts (which is from my math of 900wX2Ohms=1800, SqaureRoot of that being 42.xxx). I really hope that I didn't leave any space for clipping, but there is definitely a dead coil in my sub as I can feel some scraping when I push in the cone. I guess I dont know if I should be happy that the amp apparently has some power, or sad and confused that my sub is dead and it could possibly have been my fault...
Amp is very plain, sorry if im used to some sort of illumination from my previous O2 and Alpine amps, but I guess simplicity works. I would have loved an illuminated face on it. IJS.

Sounds Great!!!

I had never heard of this amp and I have been building custom stereo systems for over 20 years and this amp sounds awesome for the money. If your looking to build a nice system and keep money in your pocket I suggest this brand of amp for your subs.

belva bb200

I have this amp pushing to American bass xd 10's! Plenty of power it doesn't even get hot.

Great amp! Not as "clean" as more expensive amps...

This amp was a great surprise! Nice sound and great bass response. It's not as clean sounding as more expensive amps, but I have it on a kicker 12" with only 1/2 the gain and this thing pounds. Good for the price. Lots of tuning options also...

belva bb2000d

This amp is bad ass I have it hooked to 2 sa12 at 1 ohm great doesn't get hot or shut off

sub killing inexpensive well built amplifier.

Let me start out by saying don't belive any of the reviews on any site that say this amp don't put out the RMS power that the company states. IT PUTS OUT THE RMS AND THEN SOME. I installed this amp in my wife's suv on her alpine typeS 12 inch sub that is rated at 1000w RMS and 3000w MAX @1ohm load believing all the reviews about this amp not pushing it's rms. Well now the wife has a new 12 inch sub because the amp was way to powerful for the 1 alpine 12, I had the gain at 80% and the bass boost around the same level, that was the hardest and best that sub had ever hit, we'll at least for the first 5hrs tge new amp was installed. No I didn't run the sub 5hrs straight but had only installed the amp 5hrs prior to driving 30mins to the store and on the drive back the alpine gave it's life to the audio gods. The sub was hitting great and all of a sudden it stopped and sounded as if the sub was stuck in the up position. Once I got home and inspected the sub to no avail it was blown and once I dissected I found the cooked and blackened which coil. So in conclusion if u want an amp that does what it says that it will do and ur on a budget or its like mine for the wife's car then this is the amp to get, but make sure when you buy the amp tgat you under power your sub or subs combined rms so u don't kill a 200$ sub in one day like I did. All is good though I had an mtx 8500 series 12 to put in the wife's ride @ a 2ohm load with an old kicker zx750.1 she is happy again. remember HAPPY WIFE HAPPY LIFE!!!!!!!