TNP212D2 | Amplified Loaded Enclosure w/ Amp and Amp Kit | MTX

MTX TNP212D2 12" 1200W Dual Car Subwoofer Box + Amplifier and Install Kit

Dual 12" Amplified Terminator Loaded Subwoofer Bass System with Install Kit

Dual 12" Amplified Terminator Loaded Subwoofer Bass System with Install Kit

• 1200W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting
• Complete 8 Gauge 2-Channel Amplifier Installation Kit
• Designed Specifically For Car Audio Systems Up to 500 Watts RMS
• Premium Power and Ground Wire Provides Optimal Power Transfer
• Mini-ANL Fuse Holder With A 60 Amp Mini-ANL fuse

4.3

(828)
List price $359.94
Save: $69.99

$289.95

In Stock with warranty
Thanks , You Pay:
Order within 18 hrs 43 mins to ship 9/22

FREE delivery: Fri, Sept. 24 to VA.

Item Condition: Brand new

The item is brand new and not used.


protection

Add a protection plan

squarespace
3 years for

60Days
60-Day Money-Back

Hassle Free Returns

365days
365-Day Coverage

Warranty assistance for a year

DESCRIPTION
MTX

Authorized dealer

MTX Audio Terminator Party Pack

Newly released is the newest addition to the MTX Terminator line of loaded enclosures. MTX created the Terminator series amplified sub system with one thing in mind: to terminate the competition who make inferior quality loaded woofer systems. They did a great job with this system as they thoroughly tested their TNA-251 Class D monoblock amplifier with the two Terminator 12" subwoofers and matched them in the perfect enclosure. Because they built the enclosure to perfect specifications for the subs and amp combo, they allow you to leave your fear of a bad system at the door and instead enjoy hours of clean, loud bass at an unbeatable price.

MTX TNP212D2

Dual 12" Amplified Terminator Loaded Subwoofer Bass System
Quantity: 1

Authorized MTX 

Dealer

TNP212D2 Dual Loaded Subwoofer Enclosure Features:

  • 2 12" Terminator Series Subwoofers Included
  • Power Handling:
    • Peak: 1200 watts per pair / 600 watts each sub
    • RMS: 400 watts per pair / 200 watts each sub
  • 2" Aluminum single 4 ohms voice coil
  • Rubber Surround
  • Polypropylene Cone
  • MTX Audio Logo on Dustcap
  • 48oz. Magnet
  • Frequency response: 37-150 Hz
  • 1-year Manufacturer's warranty (on subwoofers only)
Enclosure Features:
  • Dual 12" Sealed Sub Enclosure
  • 5/8" MDF Solid Contruction
  • Durable Black Carpeting
  • Terminator Logo Embroidered into Carpet Front
  • Dimensions: 14"H x 29-1/2"W x 13-1/2"D1 x 11"D2
TNA251 Monoblock Amplifier Features:
  • Terminator Series Class D Monoblock Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 150 watts x 1 chan.
    • 2 ohms: 250 watts x 1 chan.
  • Max power output: 600 watts x 1 chan.
  • LED power and protection indicators
  • Selectable bass boost (0, 6, 12 dB at 40 Hz)
  • Mono gain control
  • Smart engage auto turn-on circuitry
  • Variable low-pass filter (40-400 Hz, 12 dB/octave)
  • Variable high-pass filter (40-400 Hz, 12 dB/octave)
  • CEA-2006 compliant amplifier
  • Maximum input signal: 6V
  • Maximum sensitivity: 100 mV
  • Frequency response: 20-30,000 Hz
  • Dimensions: 12-1/4"L x 7-1/8"W x 2-1/4"H
  • 1-year Manufacturer's warranty (on amplifier)

Read more about the MTX TNP212D2 in our blog!

Belva BAK82

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)
Quantity: 1

General Features:

  • Complete 8 Gauge 2-Channel Amplifier Installation Kit
  • Designed specifically for car audio systems up to 500 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
    • Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • Mini-ANL Fuse holder with a 60 amp Mini-ANL fuse offers ideal protection
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 8 gauge power wire
  2. 3 ft. (.91 meters) Black 8 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) Speaker cable
  6. One In-line Mini-ANL Fuse Holder with a 60 amp Mini-ANL fuse
  7. One black rubber firewall grommet
  8. One 8 Gauge red chrome plated ring terminals
  9. One 8 Gauge black chrome plated ring terminal
  10. Three 18 Gauge red Spade terminal
  11. Two 18 Gauge black Spade terminal
  12. One 18 Gauge red butt connector
  13. Ten 4" Black zip ties
FEATURES & SPECS
Full Range Amplifier Power Specifications
RMS Power @ 4 ohms
150 watts x 1 channels
RMS Power @ 2 ohms
250 watts x 1 channels
RMS Power @ 1 ohm
Not Stable
Bridged RMS Power
Not Bridgebale
Peak Power Output
600 watts x 1 channels
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
600 watts
Total RMS Power Output
250 watts
Maximum Input Gauge Size
8 AWG
THD at Rated RMS Power
<1%
Speaker Level Inputs
No
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
40 - 400 Hz
Low-Pass Crossover Frequency
40 - 400 Hz
Bass Boost
0 - 12 dB
Bass/Gain Remote
Yes
Fan Cooled
No
CEA-2006 Compliant
Subwoofer Specifications
Subwoofer Size
12"
RMS Power Handling
200 watts
Total RMS Power Handling
400 watts
Peak Power Handling
600 watts
Total Peak Power Handling
1200 watts
Woofer Surround
Rubber
Woofer Composition
Polypropylene
Subwoofer Design
Round / Circle
Enclosure Specifications
Box Type
Sealed
Number of Subs/Speakers
2
Box Style/Shape
Square/Rectangle
Height
14"
Width
29-1/2"
Depth
13-1/2"
Second Depth
11"
Wood Thickness
3/4"
Number of Terminals
2
Terminal Type
Binding posts
Box Exterior Color
Black
Box Finish
Carpet
Final Wired Impedance
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer
REVIEWS
MTX TNP212D2 12

MTX TNP212D2 12" 1200W Dual Car Subwoofer Box + Amplifier and Install Kit

4.3

(828)

Write a review

Overall rating distribution

5 star
50%
4 star
0%
3 star
50%
2 star
0%
1 star
0%

By feature average rating

Durability
4.6
Value
4.8
Features
4.5
Design
4.8
Usability
4.7

Sam

June 19, 2014

BAK 82

The following review is for BAK82, which is a part of the bundle you are viewing.

Nice package, quality wire but could more end connectors for the larger wire.

111

found this helpful.

Collins

January 6, 2014

Good product

The following review is for BAK82, which is a part of the bundle you are viewing.

It's exactly what you need for your car amp installation. I bought this kit with Kenwood KAC-1502S amp for 75 bucks. Good deal from Sonic Electronix.

107

found this helpful.

n2audio

September 24, 2014

Great kit for the cost

The following review is for BAK82, which is a part of the bundle you are viewing.

Very nice kit for $18.
Wire seems adequately thick. Good quality fuse (not AGU) and fuse holder. RCA's feel durable. Decent assortment of accessories. All together a solid budget kit IMO.

99

found this helpful.

Alfredo

October 29, 2014

Good product for the price

The following review is for BAK82, which is a part of the bundle you are viewing.

Good wiring package, good quality fuse holder and wires, I would like more connectors on it and maybe some tube for the power wire, but overall is a good kit.

92

found this helpful.

Joshua

December 8, 2013

Good Kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Great kit for the price. the price is good. Long wires.

91

found this helpful.

Double Down

August 14, 2012

Don't know what the other guy is talking about.

The following review is for BAK82, which is a part of the bundle you are viewing.

This kit was awesome and included with my package that I bought. In comparison to others for the same price, there is simply not a comparison and the other review is just wrong on so many levels I felt compelled to write this.

The reality is there are a lot of real shoddy amp kits and wire as a whole being used in car audio in terms of cheap amp kits that have over-insulating wires and fake gauge ratings, huge amounts of aluminum, lousy RCA cables, fuse holders and other accessories. BUT and a BIG BUT, this kit excels in those areas where others fall flat on their face. I have bought a few inexpensive 8 gauge kits in my day and XScorpion, Raptor, Install Bay and others haven't even given me the 8 gauge of wire that I paid for, and in some cases gave me wire that heated up to a dangerous level due to the actual make up of the wire.

I also literally laughed when I see that the other reviewer was intending to use spade terminals to connect his amp power and ground wire... It is for the SPEAKER wire knucklehead :-). I am an installer and the smaller accessories work just fine when you use them correctly. Most amps will still work with them when used with the speaker wire. Of course one can be used for the remote wire connection to the amp and the other end with the butt connector being used to connect to the stereo. The funny thing is, if you do not need them, who cares? It is like ordering this kit for a compact car or single cab pickup. You will not use all of the power wire for these applications, so do you complain that the manufacturer gave you extra wire? That just made me laugh.

Now, onto the other accessories. The AFS fuse and holder that are included are so far superior to others in this price range and the amount of copper (albeit CCA) is much better than others in the price range. Lastly, the RCAs included are awesome for the price. I cannot find ANYTHING to complain about here for $21.99.

All in all, you will not get a better value for the money.

88

found this helpful.

Isaac

July 15, 2010

Not A bad buy

The following review is for TNP212D2, which is a part of the bundle you are viewing.

I thought for the price it would be a great package. And actually, it is. It'll rattle your car and the car next too you. Even with the little amp such as it is. And it you get a bass reconstructor, woo, It'll sound better than most packages. Get this, and you'll love it every second.

88

found this helpful.

Eric

November 29, 2013

Great wiring kit

The following review is for BAK82, which is a part of the bundle you are viewing.

works great on my MB Quart 2x100 watt amp.

86

found this helpful.

Mitch

January 31, 2014

Good kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Good kit for basic setups. Using it right now in my mothers system powering a simple 12. Could handle more if needed.

Pros: Handles power, Wires are HQ, More copper than rubber, Wires are good length, Fuse is HQ, Comes with lots of ties and rubbers.

Cons: None

I would recommend this kit to anyone who has a simple system. All around good kit.

93

found this helpful.

Woof

January 29, 2015

Worth it

The following review is for BAK82, which is a part of the bundle you are viewing.

This one is good try the four gauge amp kit

83

found this helpful.

dean

October 14, 2014

great wiring package

The following review is for BAK82, which is a part of the bundle you are viewing.

Great wiring package for the price, everything you need is included. Sonic has the best prices that I could find anywhere.

88

found this helpful.

Jumbo Dumbo

December 19, 2013

Good Purchase

The following review is for BAK82, which is a part of the bundle you are viewing.

I used this kit to install a 2 channel Boss amp. The quality of the pieces in this kit is five stars, but I'm giving it 4 because it is my belief that to do a clean install you need (4) 8 gauge terminals (one at the batt, one at the amp, one at ground, one at the amp), not just two. I had to spend an extra six bucks at Orchard for the extra terminals, but since the cost of the kit here at Sonic was only $20 at the time, it was still a good deal.

83

found this helpful.

Chris

February 8, 2015

Belva BAK82

The following review is for BAK82, which is a part of the bundle you are viewing.

The quality is good and everything I needed was there. All of the fittings were good. More than I needed. I would recommend this product because it delivers as claimed.

80

found this helpful.

Vince

June 22, 2013

Exactly what you need

The following review is for BAK82, which is a part of the bundle you are viewing.

Comes with everything you need, literally. Ring terminals are good quality, insulation is very good quality on the wires, fuse is good quality, currently connected 2x 600 watt Pioneer 6x9 speakers to a 450 watt amp (250RMS) with this wiring kit. Plenty of length to get from the battery to the back of my car. For 21$ this is a steal! Does its job, does it well. Highly recommend this, you won't beat this price for everything you get.

79

found this helpful.

Kevin

June 7, 2010

Pretty dang amazing

The following review is for TNP212D2, which is a part of the bundle you are viewing.

It's funny that I really only got these because it was a cheap package, but they actually bump hard. Some of my friends have spent over $700 on packages and my $250 set up is just as good as theirs. I love these subs and go great in my mini van, yea that's right subs in a mini van be jealous.

78

found this helpful.
ACCESSORIES
TRENDING SIMILAR CAR SUBWOOFER BASS PACKAGES & BUNDLES

Best selling similar products

Belva BPKG212v2 - Complete Amplified Bass Package

• Includes Everything You Need: Subs, Box, Amp & Wires
• Dual 12" Belva Subwoofers
• Monoblock Amp
• Ported Enclosure
• Complete Amp Kit w/ RCAs

(70)

$239.95

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 1200W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(148)

$279.95

NVX VADM2 + (2) Rockford Fosgate 10" Subwoofers + Amp Kit

• 440 Watt True RMS Output!
• Marine Certified 2-Channel Micro Class D Amplifier
• 150W x 2-Chan. @ 4 ohms
• 220W x 2-Chan. @ 2 ohms
• 440W x 1-Chan. @ 4 ohms
• 3-Way System Protection
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint

(114)

$277.99

(2) Polk Audio MM842SVC 8” 1800 Watt Car Subwoofers Subs+Mono Amplifier+Amp Kit

• 300 Watts RMS
• 900 Watts Max
• Composite Cone
• Santoprene surround
• Fiberglass-Reinforced ABS Basket
• IP56 Ultra Marine Certified
• Vented Pole and Basket Structure

(82)

$321.33

Hifonics HFX12D4BK + Kicker 46CXA4001 + 8 Gauge Amp Kit


• Pressure treated foam surround
• Poly-cotton spider
• Heavy duty powder coated steel frame
• Vented aluminum former holds a 2" voice coil

(65)

$199.99

Searches Related to the MTX BAK82,TNP212D2
ITEM DETAILS

Manufacturer:

MTX

Model Number:

BAK82,TNP212D2

Weight:

58.80lbs

Internal SKU:

tnp212d2_bak82

Internal Product ID:

107243

Item Added to Cart

Dual 12" Amplified Terminator Loaded Subwoofer Bass System with Install Kit

$289.95

Keep Shopping

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$32.99
Add Warranty
3 years of protection

Belva BAK82BL

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)

$19.99

Add
NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$59.99

Add

Don't see the accessory you're looking for?
View all available accessories for the MTX TNP212D2 12" 1200W Dual Car Subwoofer Box + Amplifier and Install Kit.