900W Max, PowerZone Series 4-Channel Amplifier
PowerZone Series 4-Channel Car Amplifier • 115W x 4 chan. @ 4 ohms • 225W x 4 chan. @ 2 ohms • 450W x 2 chan. @ 4 ohms • MOSFET output power circuit configuration • LED power and protection indicators
Learn more about the cru-p9004PowerZone Series 4-Channel Car Amplifier • 115W x 4 chan. @ 4 ohms • 225W x 4 chan. @ 2 ohms • 450W x 2 chan. @ 4 ohms • MOSFET output power circuit configuration • LED power and protection indicators
|
(newest, current model)
|
|
(previous model, replaced by Crunch PZ900.4)
|
|
(previous model, replaced by Crunch PZA900.4)
|
|
(previous model, replaced by Crunch PZT900.4)
|
|
(previous model, replaced by Crunch P900.4)
|
Internal Product ID:
11757
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great Amp for the Price!!!
This is a great amp! powering four components without a problem! Maxxonics has always been reliable to me! This amp is great for the money! You will be heard!
10
found this helpful.Great And Underpriced
I have this amp and was extremly surprised with the clear signal I had chosen this amp because it was reasonably priced and had already overspent on a Pioneer CD deck and two pairs of Infinity Components. This amp sounds great and last for hours It ids not easily overheated. It has been underpriced and should not be judged by price. It is running 4 tweeters and 4 midrange woofers in a 1998 S10. I'm heard down the block and rattling store windows and displays.
Car alarms will be set off with the right pair of subs
7
found this helpful.Very good Quality
This item I purchase a few moth ago and really does the work. I use this amp with 4 whip audio and real hit hard!!!
7
found this helpful.Great Amp
This right here is a great amp.
Sounds Good Powering my 4 Kenwood 3-ways.
The blue logo looks nice at night.
6
found this helpful.great amp.
i dont know too much about amplifiers but i haven't had any problems with this one. provides plenty of power and doesn't run hot after hours of use.
5
found this helpful.you will be suprise
i got this amp running my rear 6.9 speakers if your and also my component door speaker 5 1/4 with a additional pair of separate set of tweeters and wow i hook it up last night i had a neighbor think i had a woofer and thats no lie. I bought this amp because it was cheap and thought ill get anything for now This amp is not just good for the money, its good period!
5
found this helpful.nice amp
does what its told. used a voltmeter to find the highest value possible for my infinity components. Am powering a set of infinity kappas up front and a set of infinity reference in the back.
4
found this helpful.Loud!!!
I was looking for an amp that could provide clean crisp sound, at a low cost. I have it powering 4 6.5's and 2 6x8's full range speakers (VR3's). The amp is set @ 120hz for the front channel and 85hz rear on high pass frequency, with the front and rear gains set @ half. If your looking to build a system on a budget get this amp seriously, you will not be disappointed. The only regret was not purchasing it from Sonic Electronics so i paid about $35 more.
3
found this helpful.
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology
5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Best selling similar products
• 100 watts x 4 channel @ 4 ohms
• 160 watts x 4 channel @ 2 ohms
• Bridged: 320 watts x 2 channel @ 4 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
$141.99
• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier
$349.99
• 45 watts x 4 channel @ 4 ohms
• 65 watts x 4 channel @ 2 ohms
• Bridged: 125 watts x 2 channel @ 4 ohms
• Total RMS Power: 260 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
$88.99
