300W RMS 10" W0v3 Series Single 4-Ohm Subwoofer with Sealed Enclosure
Product highlights
• Sensitivity: 84.07 dB
• Mounting depth: 4.90 "
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish • 10" Sealed Enclosure
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
The W0v3 offers superb excursion capability, linearity and an overall performance output that puts it right at the top of its price class. The driver features a very beefy 2.0-inch diameter voice coil, a DMA-optimized motor system and JL Audio's patented Elevated Frame Cooling design - all purpose-engineered for enhanced power handling and reliability. What this also means, is your system will be immediately injected with the increase in output and better sound fidelity that one expects from a JL Audio product. In addition, excellent excursion capability and linearity allow it to reproduce sub-bass with striking extension and quality. When matched up with the proper power source, signal and setup the W0v3 is capable of a well rounded sound that is unparalleled by any other driver in its price range.
The 10W0v3 Subwoofer can be driven with as little as 75 Watts. However, for best audio performance it is recommended to run an amplifier capable of between 200 - 300 Watts of continuous power per driver, like the JL Audio XD300/1v2 or JL Audio JX500/1D. In addition, these subwoofers are optimized to operate in either a ported or sealed enclosure, needing only 0.65 cubic feet of air space in a sealed box and 1.125 cubic feet in a ported/vented enclosure. (Specific dimensions and figures can be found in the user manual, linked further below.)
DMA is JL Audio’s proprietary Dynamic Motor Analysis system and is aimed at delivering superior dynamic stability and low distortion. As a result of DMA optimization, W0v3 motors remain linear in motor force over an extreme range of excursion and also maintain a highly stable fixed magnetic field in the gap over a wide power range. This leads to tight, clean, articulate bass that also allows for extreme linear excursion, phenomenal power handling and control, control, control.
JL Audio 10W0v3-4
300W RMS 10" W0v3 Series Single 4-ohm Car Subwoofer
Quantity: 1
Priced Individually
Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)
10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (0.77 cu ft airspace 10SQTC)
Quantity: 1
|
(newest, current model)
|
|
(previous model, replaced by JL Audio 10W0v3-4 Subwoofer + 50% off MDFS10 Sealed Box)
|
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
This product is temporarily out of stock. May we recommend...
• Sealed enclosure with 1 12" Solo-Baric L7T Series Subwoofer
• 600 watts RMS ( Peak)
• Final Impedance: 2-ohm
• Dimensions: 21.5" L x 13.75" H x 7.75" W x 4.375" W2
(9)
$349.99
List price $379.99
MTX Audio TNE212D Terminator Dual Subwoofer Package
• 400 watts Dual 12" Sealed Subwoofer Enclosure
• Single 4 ohm Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 11-1/8" TD x 13-1/2" BD x 29-11/16" W x 14" H
(32)
$219.95
List price $199.95
Rockford Fosgate Prime R2S-1X10
• Dual 10" Sealed Subwoofer Enclosure
• Dual 2 ohm Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 5.25" TD x 3.24" BD x 19" W x 13.5" H
(16)
$239.99
List price $239.99
• Sealed enclosure with 2 12" Comp Series Subwoofer
• 300 watts RMS (600 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 32-3/8" L x 16" H x 17-1/4" W x 13-7/8" W2
(4)
$299.99
List price $329.99
Rockford Fosgate Prime R2S-1X12
• Peak Power: 500 watts
• RMS Power: 250 watts
• Final Impedance: 2 ohm
• Solid 5/8" MDF Construction
• Complete with high-density black box carpeting
(10)
$259.99
List price $259.99
Rockford Fosgate Punch Shallow Loaded Enclosure P3S-1X10
• 300 Watts RMS
• 600 Watts Max
• Kevlar Fiber Semi-Pressed Paper Cone
• Compressed Sealed Poly-foam Surround
• ABS/Acrylic Dustcap Assembly
• 2.5" Voice Coil with spun-laced Nomex insulating collar
• 10 AWG compression speaker terminals
(4)
$369.99
List price $369.99
• 10" Solo-Baric Subwoofer in Thin Profile Enclosure
• RMS: 500W / Peak: 1000W
• Square Sub Design Moves 20% More Air Than Round Subwoofers
• Easily Mounts Under or Behind a Seat
• Advanced internal bracing
• Ribbed Santoprene Surround Resists Heat And Degrading
(2)
$299.99
List price $329.99
• Single 10" Sealed Subwoofer Enclosure
• Preloaded with single 10" Comp Subwoofers
• 3/4" medium-density fiberboard construction covered with carpet
• Enclosure Dimensions: 20-11/16" D x 12-1/4" W x 7-1/8" H
(2)
$149.99
List price $169.99
• Sealed downward-firing enclosure with one CompRT 12" subwoofer and passive radiator
• 3/4" medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• Power Handling: 500 watts RMS (1000 watts peak power)
• Sensitivity: 98 dB
• Frequency Response: 25-500 Hz
• Dimensions: 27-1/2"W x 14-5/8"D x 6-1/8"H
(4)
$329.99
List price $359.99
•Comp 12" Sealed Down Firing Subwoofer Enclosure
• 12" Comp-Series Subwoofer
• 3/4" medium-density fiberboard construction covered with carpet finish
• Enclosure Dimensions: 22-7/8" D x 14-3/16" W x 7-7/8" H
$179.99
List price $199.99
Internal Product ID:
135339
| 5 star |
|
84% |
| 4 star |
|
13% |
| 3 star |
|
3% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
High Quality Box!
I use this box for my Rockford Fosgate 10 and it sounds amazing in my hatch. Connectors felt solid, box felt solid. 100% recommend this!
126
found this helpful.Great box for the $.
Dropped a RF prime In and sounds great. Well built. Great value.
128
found this helpful.FREE box...
Box is well built, its hard to mess up building a small sealed box.. The only problem was sub opening wasn't large enough for my sub, 5 minutes with a jigsaw and vacumn took care of that though..
125
found this helpful.Great Value!
Sturdy, fits like a glove not too big, not too small either. Can't make it for the amount they sell it.
126
found this helpful.Decent Small Box
For the money it is a pretty good product. The carpet is a nice black. Very dark and very clean. The box is solid and can take a beating. The terminal cup is nice as its a binding post and not those crappy pressure tabs. Good box, decent sealing, good carpet.
125
found this helpful.well built for price
i have a dvc pioneer 10" sub that fits perfectly in this box and sounds great. looks good in trunk and still gives me room to put stuff in it
125
found this helpful.Nice enclosure
Not much can really be said about a sub enclosure, other than it does its job well. My Rockford Fosgate P1S2-10 fit in snuggly. The only thing that was a tad iffy was that when drilling once the bit went through it would catch of the inside insulation and mess it up, but quite honestly it didn't really bother me at all. Good enclosure.
116
found this helpful.Quality at a great price
I got this box for an Earthquake dbxi10 and thankfully the sub fit right in despite me thinking the measurements for the cutout were a bit off. The little bit of polyfill lining is a nice touch. The box felt secure and solid with a good bit of weight for the quality of wood. It definitely didn't feel like a cheap particle board box. The carpeting was on snug and looked good as well. Great pre-fab box for your sub. I expect it to last but can't say for sure as I just got it in recently.
122
found this helpful.Best boxes on the internet
great constructed boxes...great price...def recommend
116
found this helpful.Great Product!!!!
I totally recommend this product, excellent value! super fast shipping
122
found this helpful.
25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)
(50)
$29.99
List price $49.99
NVX Sound Dampening Trunk Kit (SDTK20)
20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)
(114)
$59.99
List price $71.99
NVX Sound Dampening Rubber Roller (SDRLR1)
Universal, Professional Heavy Duty Roller for Sound Damping/Dampening
(115)
$10.99
List price $13.99
