


1100W Peak (300W RMS) Loaded Single 10" Sealed Enclosure with Built-in Amplifier
• 10" Amplified Loaded Subwoofer System
• 300 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
The TS-WX1010A is a powerful sealed pre-loaded subwoofer enclosure. Featuring a built-in high bandwidth, high output and low distortion 1100 W Max Class D amplifier mated to a 10" subwoofer with a urethane surround and oversized magnet structure specifically optimized for use sealed enclosures. User adjustable controls include an LPF, phase control, variable bass boost level (0 to +12 dB), and bass boost frequency adjuster (40Hz to 100Hz) to provide enhanced subwoofer control. To expand system flexibility and user control, input gain can be adjusted using the included wired remote bass control knob or via the input gain control mounted on the enclosure side panel. The TS-WX1010A can be installed with the subwoofer firing rear or front for optimal bass tuning.
Internal Product ID:
145311
Sounds great, but a few issues
This sub is a great fit in the back of a Subaru Crosstrek and really fills in the bass nicely. But there are a couple of issues that came up in the installation.
While the sub does accept speaker level inputs, they're not signal to sense - so you do need to run a trigger wire from the accessory circuit if your head unit doesn't provide one.
The sub is advertised as 1100/300 watts (max/RMS) - even the RMS figure is exaggerated. The power and ground leads are only18 AWG, this made an installation with an 8 AWG amp kit way overkill (and a bit difficult to terminate at the harness)
36
found this helpful.This product is temporarily out of stock. May we recommend...