Garage
Shop

Sound Storm Labs (SSL) EVO4000.1 4000W Class D Amplifier + Amp Kit + Remote

4000W Max (3000W RMS) EVO Series Class-D Monoblock 1 ohm Stable Amplifier with Bass Knob Included

highlight-star-icon

• 750W RMS x 1 @ 4 ohms
• 1500W RMS x 1 @ 2 ohms
• 3000W RMS x 1 @ 1 ohm
• Total Peak Power: 4000 Watts
• Built-In Low Pass and Subsonic Filters
• 0-18 dB Bass Boost
• Aluminum Heatsink
• Dimensions: 10" W x 14.69" L x 2.3" H

Learn more about the evo40001_bak42

We apologize

This item has been discontinued

Description


Sound Storm Labs (SSL) brand icon

Authorized dealer

Sound Storm Labs (SSL) EVO4000.1

4000W Max 4000W Peak (3000W RMS) EVO Series Class-D Monoblock Amplifier with Bass Remote
Quantity: 1

Product Details:

  • EVO Series Class D 1 ohms Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 750 watts x 1 channel
    • 2 ohms: 1500 watts x 1 channel
    • 1 ohm: 3000 watts x 1 channel
    • Strapped Bridged: 6000 watts x 1 channel @ 2 ohms
  • Peak Power Rating:
    • 2 ohms: 2000 watts x 1 channel
    • 1 ohm: 4000 watts x 1 channel
  • Total RMS power output: 3000 watts
  • LED Power/Protect Light
  • Wired bass level remote control included
  • Speaker-level (high-level) inputs
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • MOSFET PWM (Pulse Width Modulated) Power supply
  • Soft turn-on circuit
  • Nickel plated RCA low level inputs
  • Nickel plated speaker and power terminals
  • Dark Gray anodized heatsink
  • Switchable phase control: 0 to 180°
  • Input sensitivity:
    • Low level: 100mV - 2 volts
    • High level: 2V - 8 volts
  • Frequency Response: 15 - 250 Hz
  • Total Harmonic Distortion (THD): <0.01%
  • Signal to Noise Ratio: 100 dB
  • Variable low-pass filter: 50 - 250 Hz
  • Subsonic filter: 15 - 50 Hz
  • Variable Bass Boost: 0 - 18 dB
  • Fuse Rating: 105A
  • 1/0 AWG gauge amplifier wiring kit is recommended for installation
  • Dimensions: 14.69" L x 10" W x 2.3" H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
  • MFR #: EVO4000.1

Check out the Sound Storm Labs (SSL) EVO4000.1 Owner's Manual

Belva BAK42BK

4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - GRAY
Quantity: 1

Product Details:

  • Complete 4 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 1200 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue and Red
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Gray 4 gauge power wire
  2. 3 ft. (.91 meters) Black 4 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 80 amp fuse
  7. One Black rubber firewall grommet
  8. One 4 Gauge Blue chrome plated ring terminals
  9. One 4 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Blue Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Specifications & Details


Power Specifications - Full Range Channels
Bridged RMS Power
6000 watts x 1 channel
Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
750 watts x 1 channel
RMS Power @ 2 ohms
1500 watts x 1 channel
RMS Power @ 1 ohm
3000 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
4000 watts
Total RMS Power Output
3000 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
2 ohms
THD at Rated RMS Power
.01%
Speaker Level Inputs
Yes
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
50 - 250 Hz
Subsonic Filter
15 - 50 Hz
Signal-to-Noise Ratio
100 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
Yes
Fuse Rating
35A x 3 
CEA-2031 Compliant
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BAK42BK,EVO4000.1

Weight:

14.54lbs

Internal SKU:

evo40001_bak42

Internal Product ID:

156257

Customer Ratings & Reviews



5 star
83%
4 star
8%
3 star
8%
2 star
0%
1 star
0%



Durability
4.8
Value
4.9
Features
4.6
Design
4.8
Usability
4.6

Customer Reviews

Sort by:

Loading...

Quality Product

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Works very well with my Rockford Fosgate sub system in my car.

By Ronald on December 11, 2014

117

found this helpful.

good deal!

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Pretty decent value for the price. Worked out great, thanks.

By Brett on January 29, 2015

114

found this helpful.

Usable

The following review is for BAK42BK, which is a part of the bundle you are viewing.

The wiring has done me right so far but the only thing I don't like is the speaker wires. You have to carefully split it so the wire doesn't show. Other than that minor thing everything was great and a great value!

By tyler on November 18, 2014

109

found this helpful.

price is right

The following review is for BAK42BK, which is a part of the bundle you are viewing.

the price is right for this setup. the ground wire and the power wire are to big for my amp but i made them fit. better to have to much than not enough so if i upgrade to a larger amp it will be fine.

By Mark on November 13, 2014

102

found this helpful.

Accessories for product

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Just what I needed and made installation so much easier. Thanks

By Susie on February 9, 2015

96

found this helpful.

awesome products

The following review is for BAK42BK, which is a part of the bundle you are viewing.

I run 2 12inch audiobahn exursions on this amp and it pushes them very well. The size is perfect not to big and fits right unerneath the seat or small space. The best part is it stays pretty cool even after running most the day.

By CJ on March 22, 2015

90

found this helpful.

good wires

The following review is for BAK42BK, which is a part of the bundle you are viewing.

I like the wire kit I got with my amp it seems to be holding up goo it handles the power of the amp I got but I would of gave it 5 stars all the way around but I wold of like the ground at less 2 more feet for good use but over all its a nice kit

By jay on March 8, 2015

87

found this helpful.

Good stuff

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Great product last a long time good value for the money.

By Brandon on December 7, 2014

89

found this helpful.

Cable

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Good product fast shipping awsome seller... keep up the good work.....

By Rondell on November 9, 2015

67

found this helpful.

Perfect kit

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Comes with everything you need. Works good with my 800w system

By Chad on May 14, 2020 Checkmark Icon Verified purchase

55

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX NDA6004 with Amp Wiring Kit

• 100 watts x 4 channel @ 4 ohms
• 160 watts x 4 channel @ 2 ohms
• Bridged: 320 watts x 2 channel @ 4 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
• Includes 4 Gauge Amp Wiring Kit

(70)

$212.48

Taramps DS 800x2 with Amplifier Wiring Kit

• 250 watts x 2 channel @ 4 ohms
• 400 watts x 2 channel @ 2 ohms
• Bridged: 800 watts x 1 channel @ 4 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 2-Channel Amplifier
• Includes Amplifier Wiring Kit

(145)

$179.99

Sony XM-GS4 with Amplifier Wiring Kit

• 150 watts x 4 chan. @ 4ohms
• 175 watts x 4 chan. @ 2 Ohms
• CEA-2006 Compliant Amplifier
• Ultra-wide frequency range that extends up to 100 kHz
• Engineered for minimal noise and maximum efficiency
• Includes Amplifier Wiring Kit

(54)

$217.99

Rockford Fosgate R500X1D Amplifier + Free Belva BAK42BK 4 Gauge Amp Kit

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

(48)

$249.99

Kicker 46CXA800.1 with Amp Kit and 3 Year Warranty

• 300 Watts RMS x 1 @ 4 ohms
• 600 Watts RMS x 1 @ 2 ohms
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Amplifier wiring kit included

(12)

$318.37

Related Searches


BAK42BK,EVO4000.1 small

Item added to your cart.

Price: $194.94

Essential add-ons
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$114.99

$99.99

Add to cart
Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon