• RMS: 420 x 1 @ 4 ohms, 760W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 7.0"W x 5.4"D x 2.0H
Spend $50 or more a get a FREE NVX Black Reusable Cloth Face Mask. This offer cannot be combined with any other coupons or offers.
Priced separately $234 98
Bundle Savings of $4 99
Total bundle price:
Purchase a qualifying amplifier and save 20% on an NVX XKIT42 True Gauge OFC amplifier installation kit. Simply click the "Add Both to Cart" button. This offer cannot be combined with any other coupons or offers.
For a limited time, save $10 on a roll of NVX SDVK4 Sound dampening with a qualifying purchase! Sound deadening will eliminate rattles and improve the sound and output of your system! This offer cannot be combined with any other coupons or offers.
Save 50% off the NVX XCAP1F 1.0 Farad Capacitor with the purchase of a select amplifier. Simply Click the "Add Both to Cart" button to the right. This offer cannot be combined with any other coupons or offers.
# of Channels
Total Peak Power
Total RMS Power
Bass Remote Included
|Dimensions||7.0"L x 7.2"W x 2.0"H||8.13"L x 6.75"W x 2.38"H|
Don't let the compact size of this amplifier fool you. It offers a total RMS power of 1000 watts. Therefore, you can install it in any location in your vehicle and get a high enough output to power your professional sound quality equipment.
The VAD Line of amplifiers include a conformally coated, marine-grade circuit board. This allows this amplifier to be installed in nearly any application.
Class-D amplifiers like the NVX VAD Line of amplifiers are more efficient, produce less heat, and draw less current than traditional Class AB circuitry.
All amplifiers in this line are designed with built-in 3-way protection circuitry. This will protect your amplifier and your speakers by offering a number of different protections including thermal, overload, and speaker short protection. These help ensure the longevity of the amplifier and your system as a whole.
Overall rating distribution
By feature average rating
March 24, 2019
big power from a small amp
TL;DR: huge power in a small package, needs markings on subsonic filter for accurate settings.
I replaced my Kenwood x501-1 with this amp so I could run @ 1 ohm to push my 2 Kicker 43VCWR122 prefab boxes that run @ 2 ohm's each.
I set the gain for 31 VAC via a digital multimeter and a 50Hz test tone and the amp does what it needs to.
I appreciate that the amp comes with a remote bass knob, but I decided to not use it (one less thing to fiddle with while I'm driving). I also like the face that I don't have to crimp any wires to connect them to my amp, it made installation so much easier.
Also, I noted that for mounting the amp, it takes roughly the same space as the Kenwood amp it's replacing, even able to use 2 of the previously made mounting holes, which made installation (for me at least) that much easier.
My 1 and only complaint - the subsonic filter. I am extremely happy that I have one, especially on an amp in this price range, but my complaint is this - I don't know what it's set at, unless I turn it all the way down (10Hz) or all the way up (55Hz) - but there's no markings in between telling me where the subsonic filter is actually set at, I'm just guessing at it until I find a way to figure it out.
May 28, 2019
Great little amp
I have this amp running a 650W 10" Dayton HO DVC sub. My sub system has way more power than my stock stereo. I have the gain at about 25%. It's nice having all the adjustments and the remote gain control is a must if you listen to a bunch of different kinds of music.
May 20, 2020
Guys I looked all over for a good amp and my cousin told me about sonicelectronix and their quality products I couldn't be happy with this little compact amp I was super surprised about how easy it was to hook up. And boom just like that it was just what I needed to power my subs.. Great amp no joke!
March 23, 2020
Easy work, great value, small foot print
I would recommend this amp due to the true RMS ratings proven on many tests. It stays cool after hrs of play. Most of all: size! This little guy packs a punch but still fits under my passenger seat in my runner to complete my stealth set up. I'm running it at 2 ohms (780ish RMS) but at partial gain on an rf p3d4-10(500 RMS) in a sealed enclosure: hits hard and low for all my taste in music. SPL would be higher in a ported box(and this amp would push it easily), but stealth is what I want and stealth is what this amp gave me plus more.
January 16, 2021
NVX does it again
All NVX products have been more than great. Even there over ear headphones and earbuds are great. If you need a real 1000 watts but only have limited space this is the amp to get. It's not guna be under rated and give 1300watts but it will give you a good 900-1000 watts which is accurate of this amp. FOR THE GUY THAT SAID HIS JL W0s SOUND MUDDY AND THE SAME. DITCH THOSE EXPENSIVE PAPER WEIGHTS AND PAIR IT WITH TWO NVX VSWs OR A SINGLE VCW. GAURANTEE YOU'LL BE HAPPY.
March 15, 2020
I have two JL W03s that I was giving 500 watts. They can take 600 watts but my space was very limited. I really wanted the Pioneer 1200 watt amp but it was too big. I chose the NVX VAD 1000.1 because it was so compact and it pushed 750 RMS at 2 ohms and 1000 at 1 ohm. Instantly I heard a difference. I also liked that it had a subsonic filter my old Alpine amp didn’t. To be completely honest I find it hard to believe it is pushing 750 because it still sounds like the JL could take some more. I am a bit disappointed because I felt the same with my Alpine. BUT it is clearly better just not what I wanted. The bass sounds too muddy. I honestly would have returned the amp if I haven’t already hooked it up.
PROS !! It will push 1000 at 1 ohm. Thinking of u grading to either two Kicker comp r or two NVX subs (500wattrms) OR 1 NVX 750-watt rms.
To be honest I think the amp is worth it what deal for the money.
Can’t beat that!!!! Just can’t seem to find the right sound. But the amp has opened up doors for me
Best selling similar products
• The size of a postcard with 400 Watts True RMS Output!
• • MVP Series 4-Channel Micro Class D Amplifier
• 50W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!
• 8 Gauge 4-Channel Complete Amplifier Installation Kit
• For Car Audio Systems Up To 600 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 4-channel RCA Interconnect Cable
• RMS: 80 Watts x 4 @ 4 ohms, 150 Watts x 4 @ 2 ohms, Bridged: 300 Watts x 2 @ 4 ohm
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High Density Aluminum Alloy Chassis
• Dimensions: 4.02" W x 8.70" L x 1.40" H
• 50 Watts RMS x 4 @ 4 ohms
• 70 Watts RMS x 4 @ 2 ohms
• Total Peak Power: 280 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• Frequency Response: 20 - 20,000 Hz
• Dimensions: 8.66"W x 3.09"D x 1.77"H
• 100 Watts RMS x 6 @ 4 ohms
• 150 Watts RMS x 1 @ 2 ohms
• CEA-2006 Compliant/Preamp Outputs/LPF
• Micro Amp
• 12.9"W x 4.4"L x 1.7"H
Internal Product ID: