2) Kicker 44CVX104 CVX 10" Subwoofers+Vented Sub Box Enclosure+Amplifier+Amp Kit

Product Details:

• 10" Dual 4 ohm CompVX Series Subwoofer
• Power Handling:
• Peak: 1,200 watts
• RMS: 600 watts
• Polypropylene Cone
• Santoprene Rubber Surround
• Oversized Suspension System
• High-Strength Insulated Tinsel Leads
• Motor-cooling perimeter venting and spring-loaded terminals
• Cast Aluminum Basket
• High Temperature Voice coil
• .64 mm Xmax
• Ceramic magnet motor structure
• Frequency Response: 24 - 500 Hz
• Resonance Frequency (Fs): 35.4 Hz
• Sensitivity: 85.7 dB
• Sealed box volume: .8 cubic feet
• Ported box volume: 1.25 cubic feet
• Top-mount depth: 5-15/16"
• Cutout diameter: 9-3/16"
• Authorized Internet Dealer
• 1-year Sonic Electronix Warranty



Priced Individually

Built for Bass

You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.

You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.

	Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.

General Features:

• 10" Dual Ported Subwoofer Enclosure
• Black high gloss front face board
• Covered in black carpet
• Durable 3/4" Medium Density Fiberboard (MDF) construction
• Subwoofer mounting depth: 10"
• Subwoofer cutout diameter: 9.5"
• Mounting Ring Width: .75"
• Box volume: 0.71 cubic feet (per chamber)
• Total box volume: 1.42 cubic feet
• Dimensions: 14"D x 30.5"L x 14"H
• Also available in Blue and Red
• Authorized Internet Dealer
• 30-Day Return Policy
>

Port Specifications:

• Rectangular Slot Port
• Number of ports: 2
• Estimated port tuned frequency (fb): 40 Hz
• Port dimensions: 11.675"Length 11.5"Depth

Product Details:

• 4 Gauge 2-Channel Complete Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Made from 100% Copper-Clad Aluminum (CCA)
• Satin chromed Mini-ANL fuse holder offers ideal protection for high-powered systems
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• RCA Interconnect Cable
• Twisted-pair construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Gray 4 gauge power wire
2. 3 ft. Black 4 gauge ground wire
3. 17 ft. Gray 18 gauge remote lead wire
4. 20 ft. 16 gauge speaker wire
5. One 17 ft. 2-channel twisted-par construction RCA interconnect Cable
6. One Mini-ANL Fuse Holder with 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 4 Gauge Chrome Plated ring terminals
9. Five 16 Gauge Spade terminal
10. One 18 Gauge Red butt connectors
11. Ten 4" Black zip ties

General Features:

• 16 Gauge Speaker Wire
• High strand count for maximum flexibility
• Ultra-flexible PVC blended jacket for easy installation
• Packed in resealable bag
• Length: 7m (23 Ft)
• Also available in 12 Gauge
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

General Features:

• Crunch Power Drive PD 3000.1
• Class-A/B 1-Ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohm: 750 watts x 1 chan.
• 2 ohm: 1500 watts x 1 chan.
• 1 ohm: 3000 watts x 1 chan.
• Total power output: 3000 watts
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Soft start turn-on
• Mono channel operation
• Speaker-level (high-level) inputs
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Quick Thermal Dispersion Technology adds more mass to aluminum heat sink to run cool
• Input sensitivity: 0.2V - 6V
• Variable low-pass filter: 40 - 300 Hz
• Subsonic Filter: 10 - 40 Hz
• Variable Bass Boost: 0 to +12 dB bass boost
• 0 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
• Dimensions: 11.4"W x 19"L x 3.8"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty