MB Quart FA1-2000.1+ FREE 4 Gauge Wiring Kits

FORMULA Series Monoblock Class D 2000 Watt 1 Ohm Stable Amplifier

MB Quart
Shop all MB Quart
highlight-star-icon

• FORMULA Series Monoblock Class D Amplifier
• 2000W x 1 @ 1 ohm / 1000W x 1 @ 2 ohms / 500W @ 4 ohms
• DC Signal Sense
• FLUID-FETS
• Heavy duty heat-sink efficiently moves heat from the MOSFET
• Bass Boost: 0-12dB

Learn more about the fa120001_bak42

We apologize

This item has been discontinued

Description


MB Quart

Authorized dealer

MB Quart FA1-2000.1

  • MB Quart Formula series mono subwoofer car audio amplifier featuring innovative sound quality and power technology. The FA1-2000.1 is a 2000 watt 1 ohm stable car audio amplifier. Formula amplifiers feature DC Sensing to allow any amplifier to be easy integrated into an OEM system by simply adapting a RCA cable from the source unit. Bass remote is included.
  • MB Quart FA1-2000.1

    FORMULA Series Monoblock Class-D 2000 Watt 1-Ohm Stable Amplifier
    Quantity: 1

    Product Details:

    • FORMULA Series Monoblock Class D Amplifier
    • RMS Power Output:
      • 2000W x 1 @ 1 ohm
      • 1000W x 1 @ 2 ohms
      • 500W x 1 @ 4 ohms
    • The DC Signal Sense switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier
    • Variable electronic crossovers allow for complete control of the sound
    • FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers.
    • Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled
    • Variable Low Pass Crossover 12dB Per Octave: 50Hz - 250Hz (Variable)
    • Bass Boost: 0-12 dB
    • Subsonic Filter: 10Hz - 40Hz
    • Variable Voltage: 0.02 - 9V
    • Signal to Noise: >90 dB
    • Frequency Response: 15Hz - 250Hz
    • THD: <0.10%
    • Fusing: 25A x 4
    • Bass knob included
    • Authorized Internet Dealer
    • 1-year Manufacturer's Warranty

    MB Quart FA1-2000.1 owner’s manual

    Belva BAK42BL

    4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - BLUE
    Quantity: 1

    Product Details:

    • Complete 4 Gauge 2-Channel Amplifier Installation Kit
    • Designed for car audio systems up to 1200 watts RMS
    • Premium Powerflex power and ground wire provides optimal power transfer
    • Belva CCA wire is made from 30% copper while the competition uses only 10%
    • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
    • MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
    • Complies to American Wire Gauge standards
    • Also available in Black and Red
    • Authorized Internet Dealer
    • 1-year Manufacturer's Warranty

    Kit includes:

    1. 17 ft. (5.2 meters) Blue 4 gauge power wire
    2. 3 ft. (.91 meters) Black 4 gauge ground wire
    3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
    4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
    5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
    6. One MINI-ANL Fuse Holder with a 80 amp fuse
    7. One Black rubber firewall grommet
    8. One 4 Gauge Blue chrome plated ring terminals
    9. One 4 Gauge Black chrome plated ring terminal
    10. Three 18 Gauge Blue Spade terminal
    11. Two 18 Gauge Black Spade terminal
    12. One 18 Gauge Red butt connector
    13. Ten 4" Black zip ties

    Specifications & Details


    Power Specifications - Subwoofer Channel
    RMS Power @ 4 ohms
    500 watts x 1 channel
    RMS Power @ 2 ohms
    1000 watts x 1 channel
    RMS Power @ 1 ohm
    2000 watts x 1 channel
    Amplifier Specifications
    Amplifier Class
    D
    Number of Channels
    1 - Mono
    Total Peak Power Output
    4000 watts
    Total RMS Power Output
    2000 watts
    Maximum Input Gauge Size
    4 AWG
    Minimum Impedance Unbridged
    1 ohms
    THD at Rated RMS Power
    <0.5%
    Speaker Level Inputs
    Yes
    Built-in Crossover
    Low-Pass (LP)
    High-Pass (HP)
    High-Pass Crossover Frequency
    Switched
    Low-Pass Crossover Frequency
    50 - 250 Hz
    Subsonic Filter
    10 - 40 Hz
    Signal-to-Noise Ratio
    >90 dB
    Bass Boost
    0 - 12 dB
    Remote bass/level controller
    Yes
    Fuse Rating
    25A x 4 
    Amplifier Kit Specifications
    Number of Amplifiers Supported
    1
    Power/Ground Wire Size
    4 gauge
    Power Wire Length
    17 feet
    Ground Wire Length
    3 feet
    Speaker Wire Included
    Yes
    Speaker Wire Length
    20 feet
    Remote Wire Length
    17 feet
    Interconnect (RCA) Signal Cables Included
    2 Channel
    Fuse Holder
    Mini ANL
    Fuse Size
    80A
    Distribution Block Included
    No
    Warranty and Return Policy
    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Item Details


    Manufacturer:

    Model Number:

    BAK42,FA1-2000.1

    Weight:

    7.60lbs

    Internal SKU:

    fa120001_bak42

    Internal Product ID:

    175519

    Customer Ratings & Reviews



    5 star
    71%
    4 star
    27%
    3 star
    2%
    2 star
    0%
    1 star
    0%



    Durability
    4.8
    Value
    4.9
    Features
    4.7
    Design
    4.9
    Usability
    4.8

    Customer Reviews

    Sort by:

    Loading...

    BELVA amp kit

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    Not much to say, its an amp kit. Great value.

    By Derek on September 19, 2014

    75

    found this helpful.

    Good kit on a budget

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    I bought this kit for a buddy of mine to do a small install in his 1999 Lumina. It's very flexible and more than enough for his little daily pounder setup.

    By Randominstaller on September 28, 2014

    74

    found this helpful.

    great product

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    Works great nice tight packaging and you get everything you need for your amp. Also it is true 4 gauge wire unlike some kits that advertise the wrong gauge wire this one is correct the correct size they say. Will buy again

    By Jamal on August 29, 2014

    71

    found this helpful.

    Belva BAK42BL

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    Disregard the rating for durability because I have only had this product installed for a week. This kit is quality for the money. The wiring is a little sparse for 4 gauge, but it's definitely not 8 gauge in a 4 gauge sleeve. Loses one star for ease of use because the ring terminals must be crimped on by the user (which may be difficult if crimpers or a vice are not accessible to the user). Overall, I would recommend this to anyone on a budget or looking for a wiring kit for their first system.

    By Dave on July 27, 2014

    71

    found this helpful.

    Beat kit for the $$

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    I ran this to my 1200 watt sony amp with 2 1000 watt pioneer subs in a sealed box . And let me just say everyone in my neighborhood can hear me before they see me. I'm only at about 75% gain . I may but 1 or 2 more as back up for the future . People said the fuse holder dosent fit , I didn't use it , but all you have to do is back the set screw all the way out and slide out the inner holer and it will fit perfectly.

    By KileFTP on October 15, 2014

    66

    found this helpful.

    very easy

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    Bad thing is i had to buy extra gauging, metal pieces besides that everything is fine but if you want good cables buy(OFC) 1/0 gauge wiring itll save you time and money

    By eduardo on April 13, 2014

    65

    found this helpful.

    Good Wire

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    Nice set. everything worked fine. Wire lengths were fine for installing in SUV. Would Buy again ... and have :)

    By BerGyver on May 11, 2015

    51

    found this helpful.

    my amps is west coast customs 1500 ccwith belva kit

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    I install my amplifier am the one one do it myself today I used terminator mtx dual 1200 watts tne212d very nice sound am so happy with it if you familiar with electronic stuff you can do it yourself cause best buy was going to ask me 400 dollars the more you learn the better you feel don't let nothing stop you from learning am very happy with west coast customs any of you who think of buying a amplifier you wont dissatisfied thank you sonic electronic and maxsonic who made west coast customs 1500 cc am out hiting the road cuise around with my Volvo xc70

    By armel brizard on June 13, 2015

    36

    found this helpful.

    Belva BAK42BL (Blue)

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    Good wires. Is four gauge wire and good speaker wire.

    By Rick on June 7, 2015

    32

    found this helpful.

    Well Built

    The following review is for BAK42BL, which is a part of the bundle you are viewing.

    Very flexible and not thin. This wire is the right size nothing skimped. RCA cables meet expectations, a nice fit. Dark blue as opposed to bright red. Hides well.

    By David on June 2, 2020 checkmarkIcon Verified purchase

    20

    found this helpful.

    Add-ons


    Similar Products


    Best selling similar products

    Alpine MRV-M500 with Amplifier Wiring Kit

    • RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
    • Total Peak Power: 500W
    • CEA-2006 Compliant Amplifier
    • 4-Channel Speaker-Level Inputs
    • Heavy Duty Aluminum Alloy Heat-Sink
    • Includes Amplifier Wiring Kit

    (63)

    $164.95

    NVX VAD17001 with Amplifier Wiring Kit

    • RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
    • Total RMS Power: 1700W
    • CEA-2006 Compliant
    • Wired Bass Remote Included
    • Efficient Class D Design
    • Includes Amplifier Wiring Kit

    (54)

    $249.99

    NVX XAD21 with Amplifier Wiring Kit

    • 250 watts x 2 channel @ 4 ohms
    • 550 watts x 2 channel @ 2 ohms
    • 1000 watts x 2 channel @ 1 ohm
    • Total RMS Power: 2000 watts
    • CEA-2006 Compliant
    • Includes Amplifier Wiring Kit

    (88)

    $257.61

    Kicker 46CXA4001 with Amplifier Wiring Kit


    • 150 Watts RMS x 1 @ 4 ohms
    • 300 Watts RMS x 1 @ 2 ohms
    • Total Peak Power: 600 Watts
    • Preamp RCA outputs to daisy chain multiple amps
    • Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
    • Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
    • Includes Amplifier Wiring Kit

    (33)

    $199.99

    NVX NBA201 Amplifier with Amplifier Wiring Kit

    • 200 watts x 2 channel @ 4 ohms
    • 350 watts x 2 channel @ 2 ohms
    • Bridged: 1400 watts x 1 channel @ 4 ohms
    • Total RMS Power: 700 watts
    • CEA-2006 Compliant
    • Includes Amplifier Wiring Kit

    (33)

    $139.99

    Related Searches


    BAK42,FA1-2000.1 small

    Item added to your cart.

    Price: $184.99

    Essential add-ons
    NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

    1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

    $114.99

    $99.99

    Add to cart

    Add vehicle

    Save up to 10 different vehicles in your garage

    Loading...
    < Back