See all parts that fit your 2002 Optima
300W RMS 4-Channel Amplifier + NVX 4-Channel L.O.C. + 4 Gauge Amp Kit
Product highlights
• RMS: 75W x 1 @ 4 ohm, 75W x 1 @ 2 ohm, 75W x 1 @ 1.5 ohm
• Total RMS Power: 300W
• R.I.P.S. (Regulated, Intelligent Power Supply)
• Dual N-Channel MOSFET power supply
• Absolute Symmetry™ Class A/B Circuit
• 13.4"L x 9.25"W x 2.36"H
The original Slash amplifier set new performance standards for automotive amplification and became the best-selling premium mobile amplifier in history. The new Slash v3 amplifier is built on this legendary pedigree and technology platform, enhancing it in a variety of key areas; like radically improved thermal performance, a beautiful new black look with powder-coated cast alloy heat sinks and dozens of tweaks aimed at improving performance, flexibility and reliability. JL Audio's Absolute Symmetry Class A/B output circuit employs identical N-Channel MOSFET transistors for push and pull with true buffering from the load impedance. This is accomplished via a patented circuit that reverses the operation of one of the transistors in each pair to achieve absolute power symmetry and extremely low distortion over a wide range of load impedances. Its these improvements that allow the v3 20% more power than the previous generation amplifiers.
With the proper utilization of the R.I.P.S System, the JL Audio Slash 300/4v3 offers a solid 75 watts RMS per channel at any load between 1.5-Ohms to 4-Ohms with any voltage draw between 11V and 14.5V. To smooth out that power to your liking, the amplifier provides a very complete set of signal processing features, including fully variable crossover filters with selectable crossover modes (Off/LP/HP). There is no magic and no guesswork here... just pure technology, refined to the last detail.
The 300/4v3 employs two separate, but identical filter sections for its front and rear channel pairs. These sections consist of a x1/x10 Frequency Multiplier, 12dB/24db Filter Slope Selector, Crossover Mode Selector, and a Fully Variable Crossover Filter for ultimate control and flexibility. Its this control and flexibility that allows the 300/4v3 to work well for a multitude of system configurations. Whether you wish to run a traditional 4-Channel Setup, an "Active" Full Range System or a Bi-Amplified System the 300/4v3 has the controls necessary to filter out the unwanted harmful frequencies from your signal.
The 300/4v3 employs JL Audio's exclusive Regulated, Intelligent Power Supply (R.I.P.S.) design. This sophisticated power supply allows the amplifier to produce its optimum power (75 watts x 4) over a wide range of speaker impedances. Unlike conventional amplifiers that require a specific impedance to produce optimum power, the R.I.P.S.-equipped 300/4v3 gives you the freedom to use a variety of subwoofer configurations without sacrificing power output or sound quality. The operation of the R.I.P.S. circuitry is entirely automatic and adjusts itself every time the amplifier is turned on according to the lowest impedance present at the speaker load.
JL Audio Slash 300/4v3
300W RMS 4-Channel Slash v3 Series Class A/B Full-Range Amplifier
Quantity: 1
 |
 |
 |
 |
Check out the JL Audio Slash 300/4v3 Owner's Manual
NVX XFLOC4
4-Channel 160W Adjustable Line Output Converter with Remote Turn On
Quantity: 1
Belva BAK44
4 Gauge Premium (CCA) Copper Clad Aluminum Complete 4-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - RED
Quantity: 1
|
(newest, current model)
|
|
(previous model, replaced by JL Audio Slash 300/4v3 + NVX XFLOC4 Line-Output-Converter + Amp Kit)
|
|
(previous model, replaced by JL Audio Slash v2 300/4v2)
|
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
6.75" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay, Android Auto with Backup Camera
$329.99
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
900W Peak (300W RMS) 6x9” CS Series 3 Way Coaxial 4-ohm Speakers with Integrated Midrange Speakers
$111.96
List price $159.99
6.8" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay, Android Auto, and SiriusXM Ready
$349.99
List price $420.00
7" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay and Android Auto (SiriusXM Ready)
$329.95
List price $349.95
6.8" Double DIN Digital Multimedia Receiver with Bluetooth, Wireless Apple CarPlay, and Android Auto (SiriusXM Ready)
$599.99
List price $750.00
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
Best selling similar products
• 100 watts x 4 channel @ 4 ohm
• 160 watts x 4 channel @ 2 ohm
• Bridged: 320 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(14)
$159.99
List price $215.99
• 80 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(41)
$209.99
List price $239.99
• 220 watts x 4 channel @ 4 ohm
• 330 watts x 4 channel @ 2 ohm
• Bridged: 660 watts x 2 channel @ 4 ohm
• Total RMS Power: 1320 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$289.90
List price $289.90
• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(28)
$379.99
List price $379.99
• 180 watts x 4 channel @ 4 ohm
• 270 watts x 4 channel @ 2 ohm
• Bridged: 540 watts x 2 channel @ 4 ohm
• Total RMS Power: 1080 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$259.90
List price $259.90
• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(34)
$299.99
List price $299.99
• 150 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(24)
$279.99
List price $335.99
• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(70)
$279.99
List price $383.99
• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$549.99
List price $659.99
• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(20)
$299.95
List price $360.00
Manufacturer:
Model Number:
300/4v3, XFLOC4, BAK44
Weight:
18.68lbs
Internal SKU:
3004v3_xfloc4_bak44
Internal Product ID:
187739
| 5 star |
|
81% |
| 4 star |
|
9% |
| 3 star |
|
5% |
| 2 star |
|
1% |
| 1 star |
|
3% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Awesome product for the price
I was overall satisfied with everything in the kit. The wire was great quality and easy to run. I liked that it came with a plastic grommet for my firewall. I think the fuse was really nice and looks great under the hood. Just make sure you have a 4 gauge crimping tool which I did not have. I ended up crimping with some pliers and a hammer to tighten up the terminals.
141 found this helpful
Good kit for the $
Used this kit to install a 4 channel amp and had plenty of wire to do the job.
136 found this helpful
Everything I needed
Great value, great quality, everything that was necessary to install the full system. Kudos.
129 found this helpful
good amp kit
The amp kit works well. The installation was very easy. I had plenty of wire. For the power and ground wires I soldered on my own copper lugs. The only real drawback is that this kit is cca instead of ofc, but that is why it is so cheap.
133 found this helpful
excellent value
this had everything you need in it to do an amp install. I was impressed with the speaker wire as it was a heavy gauge wire. 14awg I think. it was listed to have 20ft of speaker wire in product description but had 65ft in package, (nice). all the wire was nice and flexible (easy to work with) unlike some cheaper wire I've seen or used that's real stiff. couldn't ask for anything more.....
131 found this helpful
great amp kit
Made amp installation easy. Good quality gauge wire and inline fuse with this kit.
127 found this helpful
Amp wiring kit
This is an above average installation kit with all the wiring you need except a RCA for 5th channel.
Half price with bundle with Amp
127 found this helpful
Worked Perfect
Great price and fast shipping. It was all I needed to hook up my amp and composite speakers. Plenty of length on all can cables.
128 found this helpful
Really Good Quality!!
Got this wiring kit at a discount after purchasing together with amp, so ended up at around $37. Ive bought 4 gauge wiring kits before at local radio shop for the same price, but not the same quality at all! The power and ground wire are super flexible, great for passing through firewall and bending around tight corners. Great quality anl fuse, and was surprised to find 20 ft of equally good, thick, speaker wire, just enough to rewire my whole car! And loved the 4 twisted rca cables that make install a breeze, and helps keep everything looking neat and clean. Perfect for a 4 channel Amp Install.
127 found this helpful
works great
everything I needed to install, good price and value. Will order another shortly.
118 found this helpful
4-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(80)
$119.99
List price $155.99
Universal Remote Bass Level Control Knob
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
(8)
$7.99
List price $14.99
The XLOC44X helps you easily integrate with your factory or aftermarket system
(1)
$64.99
List price $149.99
NVX XIX45 X-Series RCA Interconnect Cable
16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology
(24)
$23.99
List price $28.99
NVX V-Series RCA Interconnect Cable
19 ft. of 4-Channel RCA cable with dual twisted-pair conductors
(35)
$15.99
List price $32.99
NVX XIV45 4-Channel RCA Audio Interconnect Cable
5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
(27)
$16.99
List price $29.99
All-in-one cable for speaker and amp installation (20 feet)
(2)
$29.99
List price $47.99
75 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
(21)
$34.99
List price $44.99
Belva Nine Function Digital Multimeter
Perfect for any installation and troubleshooting
(7)
$9.99
List price $29.99
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal
Make installation a breeze with the XBTU
(19)
$14.99
List price $24.99
World's Smallest AFS / Mini ANL Fuse Holder
Accepts 4 gauge or 8-gauge wire
(15)
$9.99
List price $19.99
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
(11)
$4.99
List price $9.99
High Quality Element Resistant AGU Fuse Holder
Belva BAGUH2 AGU Fuse Holder
(2)
$4.99
List price $9.99
Modular Linkable ANL Fuse Block
Modular Linkable ANL Fuse Block
(4)
$14.99
List price $59.99
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output
No-fail termination and current flow, it helps keep your system protected and running smoothly
(50)
$12.99
List price $24.99
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
(6)
$7.99
List price $9.99
4 Pack of 80 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
(19)
$3.99
List price $8.99
4 Pack of 100 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
(17)
$3.99
List price $8.99
4 Pack of 150 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses
(11)
$3.99
List price $8.99
2 Pack of 100 Amp Nickel-Plated ANL Fuse
ANL 100A Nickel plated for better power transfer
(8)
$3.99
List price $7.99
2 Pack of 200 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 200 Amp ANL Fuses
(22)
$3.99
List price $7.99
2 Pack of 300 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 300 Amp ANL Fuses
(19)
$3.99
List price $7.99
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin
Great for amplifiers that do not accept a large gauge power wire
(23)
$9.99
List price $19.00
Pair of 4 Gauge Spade Terminals, #8 Opening
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
(7)
$1.99
List price $3.99
4 Gauge Ring Terminals, 5/16" Opening
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
(3)
$4.99
List price $6.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(8)
$2.99
List price $9.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(25)
$7.99
List price $9.99
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
(21)
$14.99
List price $19.99
Marine Grade Bluetooth Audio Controller/Receiver
Marine Grade Bluetooth Audio Controller/Receiver
(10)
$49.99
List price $62.49
265W RMS Apocalypse Series Class-D 4-Channel Amplifier
$319.90
List price $319.90
800W Peak (400W RMS) 8" Revolution Series 2 Way Coaxial 4-ohm Marine Tower Speakers with Silver Aluminum Fixed Clamps (Black)
$1349.99
List price $1349.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
