SSL EV4.1000 with Amplifier Wiring Kit

1000W 4 Channel Evolution Series Class A/B Amplifier

highlight-star-icon

• 125 Watts RMS x 4 @ 4 ohms
• 200 Watts RMS x 4 @ 2 ohms
• 400 Watts RMS x 2 @ 4 ohm
• Total Peak Power: 1000 Watts
• 4, 3 or 2 channel operation
• Includes Wired remote bass level control
• Includes Amplifier Wiring Kit

Learn more about the ev41000_bak84

We apologize

This item has been discontinued

Description


Sound Storm Labs (SSL)

Authorized dealer

Sound Storm Labs (SSL) EV4.1000

1000W Peak Evolution Series 4-Channel Class A/B Amplifier
Quantity: 1

General Features:

  • SoundStorm (SSL) EV4.1000
  • Class A/B Full Range 2-Ohm Stable 4-Channel Amplifier
  • RMS Power Rating:
    • 4 ohms: 125 watts x 4 chan.
    • 2 ohms: 200 watts x 4 chan.
    • Bridged, 4 ohms: 400 watts x 2 chan.
  • Total power output: 1000 watts
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • 4, 3 or 2 channel operation
  • Speaker-level (high-level) inputs
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • High-density split-dome convection heat-sink for extreme heat dissipation
  • Input sensitivity:
    • Low level: 100mV-2V
    • High level: 2V-8V
  • Frequency Response: 9- 50,000Hz
  • Total Harmonic Distortion (THD): 0.01%
  • Signal to Noise Ration: 103 dB
  • Selectable Crossover Mode: HPF / Full / LPF
  • Variable high-pass filter: 50 - 250 Hz
  • Variable low-pass filter: 50 - 250 Hz
  • Variable Bass Boost: 0 to +18 dB
  • Fuse Rating: 15 A x 2
  • 4 - 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 10"W x 10.75"L x 2.3"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Check out the EV41000 Owner's Manual

Belva BAK84

8 Gauge Premium (CCA) Copper Clad Aluminum Complete 4-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - RED
Quantity: 1

Product Details:

  • Complete 8 Gauge 4-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 600 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 8 gauge power wire
  2. 3 ft. (.91 meters) Black 8 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 4-channel RCA interconnect cable
  5. 40 ft. (12.2 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 60 amp fuse
  7. One Black rubber firewall grommet
  8. One 8 Gauge Red chrome plated ring terminals
  9. One 8 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Red Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
94 watts x 4 channel
RMS Power @ 2 ohms
188 watts x 4 channel
Bridged RMS Power
375 watts x 2 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
4
Total Peak Power Output
1000 watts
Total RMS Power Output
800 watts
Maximum Input Gauge Size
Any Gauge with use of Spade Terminal AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
Frequency Response
THD at Rated RMS Power
0.01%
Speaker Level Inputs
Yes - with included adapter
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
50 - 250 Hz
Low-Pass Crossover Frequency
50 - 250 Hz
Signal-to-Noise Ratio
103 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
Yes
Fan Cooled
Fuse Rating
15A x 2 
CEA-2031 Compliant
No
Sonic Certified Amplifier
Not Tested
Amp Bluetooth Connectivity
Hi-Res Certified
Low-Level Input Sensitivity
High-Level Input Sensitivity
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

EV4.1000, BAK84

Weight:

12.80lbs

Internal SKU:

ev41000_bak84

Internal Product ID:

192797

Customer Ratings & Reviews



5 star
89%
4 star
6%
3 star
0%
2 star
6%
1 star
0%



Durability
5
Value
5
Features
5
Design
5
Usability
5
Sort by:

Loading...

Great value

The following review is for BAK84, which is a part of the bundle you are viewing.

Fast shipping works great with no problems. I would order other if i ever needed it

By Anonymous on August 5, 2018

21

found this helpful.

Ok starter Kit

The following review is for BAK84, which is a part of the bundle you are viewing.

It's a ok kit to buy but check the RCA jacks my kit came defective one pair of RCA jacks failed. When I finished completely installing it in my truck and turned on the head unit only to fine out 3 of my 4 channel amp was working had to take out the multimeter tested the Amp then uninstall all the head unit tested RCA jacks and one pair was defective I would assume that they would work they are New. So save time and test the RCA jacks for continuity.

By JESUS C on December 28, 2020 checkmarkIcon Verified purchase

19

found this helpful.

Great deals

The following review is for BAK84, which is a part of the bundle you are viewing.

I recommend this to anyone. The shipping is fast and you always get a good deal.

By Anonymous on September 22, 2018

20

found this helpful.

Great value!

The following review is for BAK84, which is a part of the bundle you are viewing.

Fast shipping and I recommend it for anyone. Everything u see in the picture is what u get.

By Anonymous on August 14, 2018

21

found this helpful.

Good Value Kit!

The following review is for BAK84, which is a part of the bundle you are viewing.

Everything I needed and good quality wire, not like some other cheap thin gauge wire you get in similarly priced kits elsewhere.

By Adam on February 1, 2018 checkmarkIcon Verified purchase

19

found this helpful.

Great value

The following review is for BAK84, which is a part of the bundle you are viewing.

Included in a bundle package for the price well worth it

By Chad on September 15, 2017 checkmarkIcon Verified purchase

18

found this helpful.

Works as said

The following review is for BAK84, which is a part of the bundle you are viewing.

Everything needed for a 4 ch amp install. Better quality than other cca kits I have used before. Nice thick strands.

By brian on October 19, 2015

17

found this helpful.

Works as said

The following review is for BAK84, which is a part of the bundle you are viewing.

Works good and is high quality cca wiring, better than many others I have used. Fine for about a 400 watt rms 4 ch amp set up. Larger go with 4ga to be safe.

By brian on November 15, 2015 checkmarkIcon Verified purchase

16

found this helpful.

Good value

The following review is for BAK84, which is a part of the bundle you are viewing.

Good value. All the stuff you need for a couple of speakers and a sub to an amp. Easier than buying it individually.

By Jason on April 11, 2020 checkmarkIcon Verified purchase

12

found this helpful.

Awesome Buy

The following review is for BAK84, which is a part of the bundle you are viewing.

It was everything I needed one package for a great price

By Frankie on April 24, 2017

14

found this helpful.

Add-ons


Similar Products


Best selling similar products

Alpine MRV-M500 with Amplifier Wiring Kit

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Includes Amplifier Wiring Kit

(63)

$169.95

NVX VAD17001 with Amplifier Wiring Kit

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Includes Amplifier Wiring Kit

(53)

$249.99

Kicker 46CXA4001 with Amplifier Wiring Kit


• 150 Watts RMS x 1 @ 4 ohms
• 300 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit

(33)

$169.96

Kicker 46CXA8001 with Amplifier Wiring Kit

• 300 Watts RMS x 1 @ 4 ohms
• 600 Watts RMS x 1 @ 2 ohms
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• Includes Amplifier Wiring Kit

(36)

$254.96

NVX NBA201 Amplifier with Amplifier Wiring Kit

• 200 watts x 2 channel @ 4 ohms
• 350 watts x 2 channel @ 2 ohms
• Bridged: 1400 watts x 1 channel @ 4 ohms
• Total RMS Power: 700 watts
• CEA-2006 Compliant
• Includes Amplifier Wiring Kit

(31)

$139.99

Related Searches


EV4.1000, BAK84 small

Item added to your cart.

Price: $130.99

Essential add-ons
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$114.99

$99.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back