See all parts that fit your 1980 Midget
Amplifier and Subwoofer Integration Interface for select 2012-2019 vehicles from Toyota, Lexus
Product highlights
• Amplifier and subwoofer integration interface for select 2012-2019 vehicles from Toyota, Lexus
• Vehicle must be equipped with a factory JBL system
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier and subwoofer
• Delivers 5V RMS pre-amp output with bass equalization and level control
270W Peak (90W RMS) 4" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$90.00
List price $99.99
460W Peak (100W RMS) 4” A Series 2-way 4-ohm Coaxial Car Speakers
$90.00
List price $110.00
Infinity REF407F (INFSPKRF407FUS)
210W Peak (75W RMS) 4" Reference Series 2-Way Coaxial 3-ohm Speakers
$87.95
List price $139.95
100W Peak (50W RMS) 6.5" Stage2 Gen 2 Series 2 Way Coaxial Speakers
$49.99
List price $69.00
70W RMS 4" C2 Series 2-Way Coaxial 4-ohm Car Speakers
$164.99
List price $189.99
Rockford Fosgate Punch P1 P142
120W Peak (60W RMS) 4" Punch Series 2 Way Coaxial 4-ohm Speakers
$109.99
300W Peak (100W RMS) 4” CS Series 2 Way Coaxial 4-ohm Speakers
$59.96
List price $84.99
Integration with today’s advanced vehicle systems like databus-controlled amplifiers can be difficult, if not impossible. AmpPRO SUB products seamlessly integrate with the databus allowing for full control and optimum sound from a factory radio when adding aftermarket amplifiers.
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
The vehicle you have selected 1980 MG Midget is not compatible. Change vehicle or See list of compatible similar products
Best selling similar products
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2011-2025 vehicles from Ram, Dodge, Jeep with non-amplified systems
(10)
$93.99
List price $104.99
• Plug and Play T-harness for faster installation
• For select 2019-2024 vehicles from Chevrolet, GMC, Cadillac
• Designed for Ethernet amplifiers
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
(3)
$517.99
List price $613.99
• Amplifier and subwoofer integration interface for select 2013-2024 vehicles from Ram, Jeep, Dodge
• Compatible with amplified vehicle systems
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier and subwoofer
• Delivers 5V RMS pre-amp output with bass equalization and level control
$239.00
List price $329.00
• Amplifier integration interface for select 2003-2014 vehicles from Ford, Lincoln, Mercury
• Compatible for vehicles without amplified THX and Sony systems
• 4-channel RCA output
• Linear 20-20000 Hz sound reproduction
• For use with an aftermarket amplifier
(26)
$56.99
List price $129.00
• Amplifier, LOC, and sound processor integration T-harness for select 2018-2024 vehicles from Ford
• Provides necessary high-level inputs and speaker outputs
• Compatible in non-amplified vehicles with 32-pin connector
• Works with PAC LocPro Advanced LOCs
• Works with amps and sound processors with speaker-level inputs
$63.00
List price $109.00
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2014-2025 vehicles from Hyundai, Kia with non-amplified systems
(1)
$93.99
List price $104.99
• Amplifier, LOC, and sound processor integration T-harness for select 2011-2020 vehicles from Ford
• Provides necessary high-level inputs and speaker outputs
• Compatible with non-amplified vehicles with a 24-pin connector
• Works with PAC LocPro Advanced LOCs
• Works with amps and sound processors with speaker-level inputs
$63.00
List price $109.00
• Amplifier integration interface for select 2013-2023 vehicles from Ram, Jeep, Dodge
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier
• Delivers switchable 4-volt or 5-volt RMS pre-amp output
(4)
$419.00
List price $499.00
• Plug and Play T-harness for faster installation
• For select 2010-2021 vehicles from Chevrolet, GMC, Cadillac
• Designed for MOST amplified systems
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
$638.99
List price $709.99
Manufacturer:
Model Number:
APSUB-TY12
Weight:
1.20lbs
Internal SKU:
apsubty12
Internal Product ID:
214925
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Dual 10" Desert Digi Camo Vented Subwoofer Enclosure
$183.95
List price $249.95
Rockford Fosgate Prime R1675X2
180W Peak (90W RMS) 6.75" Prime Series 2 Way Coaxial 4-ohm Speakers
(59)
$79.99
List price $79.99
600W RMS Class D Hydro-Tech X Series 4 Channel Marine Amplifier
(1)
$799.99
List price $899.99
Mounting Clamps for Stealth Soundbars with 1.5" Round Tubing
(1)
$37.99
List price $37.99
Single 12" Reptile Style Vented SPL Subwoofer Enclosure
$164.95
List price $229.95
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
