1000W Max 2-Channel Performance Series Stereo/ Bridgeable Power Amplifier
GUARANTEED LOWEST PRICE. CONTACT US 24/7 • 2-Channel Class AB Car Amplifier • 170W x 2 chan. @ 4 ohms • 250W x 2 chan. @ 2 ohms • 500W x 1 chan. @ 4 ohms • 500W x 2 chan. Max • Built-in cooling fan • Speaker-level inputs
Learn more about the kac7205GUARANTEED LOWEST PRICE. CONTACT US 24/7 • 2-Channel Class AB Car Amplifier • 170W x 2 chan. @ 4 ohms • 250W x 2 chan. @ 2 ohms • 500W x 1 chan. @ 4 ohms • 500W x 2 chan. Max • Built-in cooling fan • Speaker-level inputs
The new Kenwood Performance series amplifiers are amps that truly live up to their name. Delivering high performance constantly and consistently. The Kenwood KAC-7205 is a high powered amplifier with a maximum output of 1000 watts. That power is distributed into two separate channels, or the two channels can be bridged to a single channel. The back of the amplifier features two cooling fans that allow the internal heat to quickly escape the amplifier. This helps the amplifier stay cool no matter how much use it gets. A low-pass filter is built-on to the board of the amplifier and can be adjusted with the dials on the front panel. This helps make the KAC-7205 amplifier the perfect choice for powering a subwoofer. It is also fully compatible with 2 ohm loads, which give the amp a wider variety of compatible speakers and subwoofers. Kenwood has also made this amplifier perfect for those that want to keep a factory stereo installed in their car by accepting speaker level inputs to provide an input signal. This helps make the installation into OEM systems easier and faster. Overall, this 2 channel amplifier from Kenwood proves to be a powerful and efficient choice for any car audio system.
|
(newest, current model)
|
|
(previous model, replaced by Kenwood KAC-7205)
|
|
(previous model, replaced by Kenwood KAC-7204)
|
|
(previous model, replaced by Kenwood KAC-7203)
|
|
(previous model, replaced by Kenwood KAC-7202)
|
Internal Product ID:
22733
| 5 star |
|
73% |
| 4 star |
|
20% |
| 3 star |
|
5% |
| 2 star |
|
0% |
| 1 star |
|
2% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
pretty good
Pushes strong, good quality amp here, i had to get something a bit more powerful but this thing is great if ur looking to push a couple small subs.
23
found this helpful.Nice amp! But...
This amp looks nice and works good with my speakers and is good for the price. The only downfall to me is that it has a safety switch built into it, so when it gets too hot, it kicks off. Which is good so you dont blow any fuses, but then the speakers won't work at all. They come back on after a few mins and then go right back off, either the fans in the amp are not working right or I just have bad luck.
21
found this helpful.Kenwoos KAC-7205
I have had this amp hooked up to two Hifonics 12's for about 6 months now and never once has it gave me any trouble. Great amp.
20
found this helpful.Yet Another Great Kenwood Product
I bought this amp to power my 12" Kicker subwoofer. The cooling fan is a great feature and even through hours of use it still remains cool with little to no heat being given off. As I continue to upgrade my car's audio system, Kenwood will continue to be my brand of choice.
19
found this helpful.Just Installed
Just installed this amp to 2 10" JL's. It's working great, sounds amazing. Fans are noticeable when no music is on and its sitting close to you (mine is mounted on the back of my collapsible seat)
18
found this helpful.Couldnt have made a better choice
My friend had a Kenwood amp and i went off of his referall, and i couldnt have made a better choice, easy to install, and when i went to bridge em it had it labeled, for my first amp this works great and its a great value.
19
found this helpful.junk
Crappy as hell keeps powering off and blowing fuses.
18
found this helpful.Great buy
This amp is awesome! have two 10" focal auditors hooked up to the amp and it rocks the whole car. never had any problems with it. been working great since i installed it 7 months ago
18
found this helpful.THE BEST
THIS YOU MUST HAVE >>>> SOUNDS BEST ON 12" Subs
18
found this helpful.Great Value
Upgrading from an old 700 watt amp to this made a huge difference on my 2 10" subs with a ported box. Very good value. A lot of power with clean sound if tuned properly
18
found this helpful.
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Controls bass level and frequency and monitor voltage
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Best selling similar products
Rockford Fosgate Punch PBR300X2
• 100 watts x 2 channel @ 4 ohms
• 150 watts x 2 channel @ 2 ohms
• Bridged: 300 watts x 1 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class BR 2 ohms Stable 2-Channel Amplifier
$249.99
• RMS: 300 x 2 @ 4 ohms, 420W x 2 @ 2 ohms, Bridged 840W x 1 @ 4 ohm
• Total RMS Power: 840W
• CEA-2006 Compliant
• Efficient Full Range Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
$179.99
• 420 watts x 2 channel @ 4 ohms
• 630 watts x 2 channel @ 2 ohms
• Bridged: 1260 watts x 1 channel @ 4 ohms
• Total RMS Power: 1260 watts
• Class D 2 ohms Stable 2-Channel Amplifier
$189.90
• 250 watts x 2 channel @ 4 ohms
• 500 watts x 2 channel @ 2 ohms
• Bridged: 1000 watts x 1 channel @ 4 ohms
• Total RMS Power: 1000 watts
• Class A/B 2 ohms Stable 2-Channel Amplifier
$55.99
• 38 watts x 2 channel @ 4 ohms
• 75 watts x 2 channel @ 2 ohms
• Total RMS Power: 150 watts
• Class A/B 2 ohms Stable 2-Channel Amplifier
$39.99
