See all parts that fit your 2015 Commander Max 1000 XT
Install a New Car Amplifier and Retain Factory Features in select 2025-2026 vehicles from Ford with B&O A2B Amplifed Systems
Product highlights
• Direct connection to the factory harness
• Compatible with select 2025-2026 vehicles from Ford
• For models with B&O A2B factory amplified systems
• Retains factory nav, chimes, Bluetooth, voice activation
• Color coded wires for easy installation
• No cutting or splicing required
3.5" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$189.99
List price $211.99
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$156.99
List price $174.99
120W Peak (60W RMS) Cage Mount Speaker Pods with 1.75" Clamp
$399.99
120W Peak (60W RMS) Cage Mount Speaker Pods with 2" Clamp
$399.99
10" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$250.00
List price $275.00
Loaded 8" Cage-Mount Speaker-Pods Enclosure with SSV Works Speakers
$599.99
The PAC AP4-FD32 (AmpPRO Series) is a specialized amplifier integration interface designed for select 2025 and newer Ford vehicles equipped with the premium B&O (Bang & Olufsen) A2B data-bus sound system. This module allows you to bypass the factory amplifier and output a clean, flat, high-voltage signal to aftermarket amplifiers without losing critical vehicle functions. By tapping into the digital A2B stream, it eliminates factory bass roll-off and processing, providing a high-fidelity foundation for custom audio builds.
The AP4-FD32 delivers a 6-channel 5V RMS preamp output (Front, Rear, and Sub) that is fully adjustable and switchable to 4V if needed. It includes a vehicle-specific T-harness for a plug-and-play installation, retaining all factory audio features such as navigation prompts, SYNC, Bluetooth, and safety chimes. Additionally, it features a TOSLINK optical output for direct connection to high-end Digital Signal Processors (DSPs) and a remote turn-on lead for your aftermarket gear.
Note: Not compatible with 2025+ Explorer and Expedition.
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
The vehicle you have selected 2015 Can-Am Commander Max 1000 XT is not compatible. Change vehicle or See list of compatible similar products
Best selling similar products
• Plug and Play T-harness for faster installation
• For select 2019-2024 vehicles from Chevrolet, GMC, Cadillac
• Designed for Ethernet amplifiers
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
(3)
$517.99
List price $613.99
• Amplifier and subwoofer integration interface for select 2013-2024 vehicles from Ram, Jeep, Dodge
• Compatible with amplified vehicle systems
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier and subwoofer
• Delivers 5V RMS pre-amp output with bass equalization and level control
$239.00
List price $329.00
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2011-2025 vehicles from Ram, Dodge, Jeep with non-amplified systems
(10)
$93.99
List price $104.99
• Amplifier integration interface for select 2003-2014 vehicles from Ford, Lincoln, Mercury
• Compatible for vehicles without amplified THX and Sony systems
• 4-channel RCA output
• Linear 20-20000 Hz sound reproduction
• For use with an aftermarket amplifier
(26)
$56.99
List price $129.00
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2014-2025 vehicles from Hyundai, Kia with non-amplified systems
(1)
$93.99
List price $104.99
• Amplifier, LOC, and sound processor integration T-harness for select 2018-2024 vehicles from Ford
• Provides necessary high-level inputs and speaker outputs
• Compatible in non-amplified vehicles with 32-pin connector
• Works with PAC LocPro Advanced LOCs
• Works with amps and sound processors with speaker-level inputs
$63.00
List price $109.00
• Plug and Play T-harness for faster installation
• For select 2010-2021 vehicles from Chevrolet, GMC, Cadillac
• Designed for MOST amplified systems
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
$638.99
List price $709.99
• Amplifier integration interface for select 2013-2023 vehicles from Ram, Jeep, Dodge
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier
• Delivers switchable 4-volt or 5-volt RMS pre-amp output
(4)
$419.00
List price $499.00
• Amplifier, LOC, and sound processor integration T-harness for select 2011-2020 vehicles from Ford
• Provides necessary high-level inputs and speaker outputs
• Compatible with non-amplified vehicles with a 24-pin connector
• Works with PAC LocPro Advanced LOCs
• Works with amps and sound processors with speaker-level inputs
$63.00
List price $109.00
Manufacturer:
Model Number:
AP4-FD32
Weight:
0.77lbs
Internal SKU:
ap4fd32
Internal Product ID:
230943
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
