


2 Position Fused Distribution Block with One 0/1 Gauge Input and two 4/8 Gauge Outputs
• One 1/0 Gauge Input
• Two 4 Gauge or 8 Gauge Output
• Satin Chrome Plated Terminals
• All Brass Hardware
NVX is proud to introduce the XFDBU2 Two Position Fused Distribution Block. This is the perfect solution for multiple amp wiring. This allows you to run one power wire from your battery to 2 fused power outs with the option of different amperage fuses.
As with all NVX products, you can can expect truly great design and engineering. The XFDBU2 is made of solid brass and satin chrome plated for the best power transfer possible.
Best selling similar products
Internal Product ID:
45064
Perfect dist block.
Like others mentioned its a solid product, Using it on 4 gauge power wire. The cover snaps back on tight & not loose like other distribution block covers. Another great product from NVX.
77
found this helpful.GREAT QUALITY AND DECENT WEIGHT
Great quality and weight with a nice solid cover for show. Will buy nvx products again!!!!!
75
found this helpful.Simple and easy distribution/fuse block
Very simple install, appears to be a quality piece of equipment. Comes with adapters for 4/8 GA wire as well (can have 0/1 or 4 GA input with 4 GA or 8GA output. One size allen key to adjust everything. Looks nice. No complaints.
68
found this helpful.Solid distribution block
Top quality, solid 2 fuse holder / distribution block. The cover snaps on without concern but be careful when aligning the tabs
69
found this helpful.Another great NVX product
I bought this distribution block when I bought the rest of my set-up from Sonic. The construction is very well and is definitely not cheap feeling. The one I received had a broken tab on the top, and without hesitation they sent me a brand new one free of charge. Nvx makes excellent products and the xfdbu2 is a superb accessory.
63
found this helpful.Does what is suppose to do
Works nice. Small and compact and can fit it anywhere.
61
found this helpful.Good quality
The product is exactly what I needed. I have a 1/0 power source and my amp needs a 4 gauge power cable. This allows me to add another amp on the future when I'm ready. Love it!!!!
59
found this helpful.Safety
Works perfect, installed this between my two amplifiers and it looks clean. Mounts well on MDF.
61
found this helpful.Excellent Fuse Holder
I have gone through several fuse holders in numerous different installs, and the products by NVX always exceed my expectations. This fuse holder is built from quality materials and is not flimsy at all. The cover does not become brittle in colder weather (about 10 degrees F) which is normally a problem with others. It is also impervious to gas and oil which makes it a great fit under the hood and next to the battery. While the white label paint on the top disappears easily with chemicals, it does not seem to affect the plastic. The Allen set screws for the cables and well tapped and are very hard to over tighten or strip; the same also applies to the screws for the fuse itself. I would highly recommend this and other NVX products. They have yet to let me down!
39
found this helpful.Prefect size
Item is recommended for its tiny footprint and durability. Prefect for a two amp system.
37
found this helpful.