1400W RMS Monoblock Class D ZTX Series Car Amplifier
• ZTX Series Monoblock Class D Amplifier
• 600W x 1 Chan. @ 4 ohms • 1000W x 1 Chan. @ 2 ohms • 1400W x 1 Chan. @ 1 ohm
• 3-Way System Protection
• 1 Channel Operation
• 1/0 Gauge Power and Ground Inputs
• Variable Bass Boost 0-12 dB
• ZTX Series Monoblock Class D Amplifier
• 600W x 1 Chan. @ 4 ohms • 1000W x 1 Chan. @ 2 ohms • 1400W x 1 Chan. @ 1 ohm
• 3-Way System Protection
• 1 Channel Operation
• 1/0 Gauge Power and Ground Inputs
• Variable Bass Boost 0-12 dB
That’s where RE Audio has taken their new ZTX v2 amplifier line. They didn’t just pick up where the XTX series left off – The USAmps/RE Audio Engineering Team did so by coming up with a radical new cosmetic design incorporating a wooden top plate with a piano “Black Lacquer” finish and a “Back-lit” RE logo badge. And the rest – The sound and power classes that match perfectly with all their speaker systems and subwoofers.
Internal Product ID:
68118
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great sound! Great quality! Great purchase!
I have two Kenwood Kfc-w3013ps 12" subs in a custom ported box i built, and this amp pushes them wonderfully! I have them wired to 2 ohms and my voltage stays pretty steady. I also however have a 4.5F Cap wired in, but I'm not completely sure if it works properly (my capacitor every so often says the voltage going through it is high and it also beeps in particular patterns. The build on the Amp is great! The amp looks so nice and sleek and has an LED glow beneath the logo. The LEDs are bright enough but they wont brighten up your whole car at night, and they aren't distracting. Before i made my decision to buy this product, i was also considering a Brutus amp from Hifonics with equal wattage values. It was a close tie, but i preferred this amp, because of the name and build quality. I am very happy with this buy and certainly recommend the ZTX-3000.1.
26
found this helpful.powerful/quality amplifier
This amplifier puts more then its rated rms power on 14.4v, I have it powering my re sex-15 down to 1 ohm, thinking of buying another one.
I love this amp definitely getting another amp from this series to power my mids and highs
25
found this helpful.Best Value Hands Down
For the $ this amp can't be beat. I'm running it at 2 ohms, it pushes my Alpine Type X to the limit. My trunk build is simple with 1 10'' sub, 1 1k watt amp, 1 line driver, custom enclosure, with one goal.... 140+ db, on TL. I'm almost there, high 30's now. If you don't want to upgrade your electrical or unload your wallet, go with this amp, it's stable to 1 ohm, it's cousin amp was dyno tested and put out more than rated. Keep in mind it is not CEA compliant but that does NOT mean it doesn't put out rated, just means CEA hasn't gotten around to giving RE the CEA compliant label YET. Get this amp, you won't be disappointed.
26
found this helpful.great amplifier
i've got this amp pushing 2 15" Skar VVXv2's @ 1 ohm and it does that flawlessly. definetly does rated and doesnt strain an stock electrical system as well... ive got 1/0 ran from front to back and 1/0 ground.. both power and grounds have 1/0 to 4 gauge adapters that fit into the 45'd molded terminals .... you wont fit 1/0 or even most 4 gauge so i suggest adatpers.... overall great amp great power
24
found this helpful.
1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Comes with everything you need to upgrade your power and ground wire.
Features everything needed to upgrade factory power and ground wire.
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept large gauge power wire
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
$179.99
• 670 watts x 1 channel @ 4 ohms
• 1100 watts x 1 channel @ 2 ohms
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohms Stable Monoblock Amplifier
$179.99
• 500 watts x 1 channel @ 4 ohms
• 850 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier
$149.99
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
$279.99
Rockford Fosgate Prime R2-1200X1
• 400 watts x 1 channel @ 4 ohms
• 800 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier
$409.99
