300W RMS 12" W1v3 Series Single 4-ohm Car Subwoofer
• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.41"
• Sensitivity: 86.1 dB
Get a Free roll of Belva 16 Gauge Speaker Wire. Simply click the "Add Both to Cart" button and you will see your savings at checkout. This offer cannot be combined with any other coupons or offers.
JL Audio 12W1v3-4
100% off
$249 99
$12 99
Priced separately $262 98
Promo Savings of $12 99
Total price:
$249 99
Provides the best protection possible for the subwoofer, and is made with top-notch JL Audio quality materials. This offer cannot be combined with any other coupons or offers.
JL Audio 12W1v3-4
50% off
$249 99
$49 99
Priced separately $299 98
Promo Savings of $25 00
Total price:
$274 98
• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.41"
• Sensitivity: 86.1 dB
The W1v3 is an outstanding choice when your build provides space that is very tight and amplifier power that is respectably moderate. The driver features a shallow mounting depth (5.41 in. / 137 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 12-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. In addition, excellent excursion capability and linearity allow it to reproduce sub-bass with striking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability. This includes JL Audio's patented DMA, Elevated Frame-Cooling and Floating Cone Attach Method™ technologies.
The 12W1v3 Subwoofer can be driven with as little as 75 Watts. However, for best audio performance it is recommended to run an amplifier capable of between 200 - 300 Watts of continuous power per driver, like the JL Audio JX500/1D. In addition, these subwoofers are optimized to operate in either a ported or sealed enclosure, needing only 1.10 cubic feet of air space in a sealed box and 1.60 cubic feet in a ported/vented enclosure. (Specific dimensions and figures can be found in the user manual, linked further below.)
DMA is JL Audio’s proprietary Dynamic Motor Analysis system and is aimed at delivering superior dynamic stability and low distortion. As a result of DMA optimization, W1v3 motors remain linear in motor force over an extreme range of excursion and also maintain a highly stable fixed magnetic field in the gap over a wide power range. This leads to tight, clean, articulate bass that also allows for extreme linear excursion, phenomenal power handling and control, control, control.
Priced Individually
|
(newest, current model)
|
|
(previous model, replaced by JL Audio 12W1v3-4)
|
Best selling similar products
Rockford Fosgate Punch P3D2-12
• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• Anodized Aluminum Cone
• Santoprene Rubber Surround
• Mount depth: 6.66"
• Sensitivity: 85 dB
(76)
$219.99
List price $219.99
• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Rubber Surround
• Mount depth: 3.5"
• Sensitivity: 84.11 dB
(17)
$549.99
List price $549.99
• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.5"
• Sensitivity: 85 dB
(2)
$189.99
List price $227.99
Kicker CWR122 (48CWR122) (Sold Individually)
• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-3/4"
• Sensitivity: 86.9 dB
(9)
$152.96
List price $189.99
Kicker CWRT122 (48CWRT122) (Sold Individually)
• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• UV-Treated Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 3-3/4"
• Sensitivity: 85.5 dB
(3)
$206.96
List price $229.99
• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.5"
• Sensitivity: 85 dB
(1)
$189.99
List price $227.99
Rockford Fosgate Punch P3D4-12
• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Anodized Aluminum Cone
• Santoprene Rubber Surround
• Mount depth: 6.66"
• Sensitivity: 85 dB
(131)
$219.99
List price $269.99
Kicker 51CWQ122 (Sold Individually)
• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• SoloKon Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 7-1/8"
• Sensitivity: 85.4 dB
(1)
$329.99
List price $359.99
Kicker CWR124 (48CWR124) (Sold Individually)
• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-3/4"
• Sensitivity: 86.9 dB
(4)
$152.96
List price $189.99
• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 7.07"
• Sensitivity: 86.70 dB
(6)
$389.90
List price $389.90
Internal Product ID:
69581
| 5 star |
|
67% |
| 4 star |
|
33% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Very pleased!
If you’re looking for something that’ll fit in a smaller, under seat box…this is it. They’re not the cheapest, but there’s more expensive out there too. Do it…you won’t be disappointed
I’ve always had 12’s, but wanted to go with something that would fit better in my truck, so I got some kicker 10’s. After some time with them, I just couldn’t get down with the 10’s….they just don’t do what 12’s do. After doing some digging, I found these W1’s worked for the same airspace as the box I have for the 10’s (they ask for 1 sq ft and the box is about .95 per side) and the amp (kicker 800.1) I have as well. Hooked them up today, SUPER excited with the result. Obviously I haven’t had much time on them yet, but I can already tell I made the right decision. I haven’t even really turned them up much and the bass is on point. I still need to re-tune the amp since putting them in. Need to make some adjustments tomorrow, but it’s jammin nice now.
Verified purchase
60
found this helpful.12w1v3-4
great sub id recommend it great value for what you are getting
33
found this helpful.Good intro subs
These are great Intro subs! Currently have 2 of these installed in my 2017 Maxima but about to upgrade to 2 W3's. Not quite enough oomph! Lol
Verified purchase
30
found this helpful.
Durable 3/4" Medium Density Fiberboard (MDF) Construction
Flexible multi-strand cable bends and twists to meet your installation needs.
Get true gauge JL Audio speaker wire to match your JL Audio subwoofer!
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
