1200W Peak (900W RMS) Anarchy Series Class-AB 4-Channel Amplifier
• 113 watts x 4 channel @ 4 ohms
• 225 watts x 4 channel @ 2 ohms
• Bridged: 450 watts x 2 channel @ 4 ohms
• Total RMS Power: 900 watts
• Class A/B 2 ohms Stable 4-Channel Amplifier
• 113 watts x 4 channel @ 4 ohms
• 225 watts x 4 channel @ 2 ohms
• Bridged: 450 watts x 2 channel @ 4 ohms
• Total RMS Power: 900 watts
• Class A/B 2 ohms Stable 4-Channel Amplifier
Internal Product ID:
75674
| 5 star |
|
33% |
| 4 star |
|
67% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Nice Amp
This is a simple to use amplifier for a beginner. I like the flexibility of the tuning. Overall it meets my expectations.
Verified purchase
21
found this helpful.Good price. good amp
I bought this to run 4-6.5" kicker door speakers. Gain is under half and it sounds great! I have plans to upgrade to 4 6x9s later. I'm sure this amp has the power. I'd buy again. An adjustable high pass filter would have been better but I can't complain for the value.
20
found this helpful.Planet Audio AC1200.4 - IT ROCKS!!
I use this to power a pair of 6 1/2" door and a pair of 6"x9" rear speakers. Pushing mostly rock and metal, I am very impressed with the thick/solid/clear full range that does not distort at volume levels other amps do. The sound blends so well with my subs, I'll be rockin' hard and giving a horns up to Planet Audio! For the money, you can't beat this.
Also, a few corrections to to the Sonic Electronix description:
225 W X 4 RMS @ 2 ohm
113 W X 4 RMS @ 4 ohm
450 W X 2 RMS Bridged @ 4 ohm
The high pass filter is FIXED - 80 Hz
http://www.planetaudiousa.com/auto/car-audio-sound-system-auto-4-channel-amplifier-planet-audio-ac1200-4/
Verified purchase
13
found this helpful.
16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology
5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Best selling similar products
• 100 watts x 4 channel @ 4 ohms
• 160 watts x 4 channel @ 2 ohms
• Bridged: 320 watts x 2 channel @ 4 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
$139.99
• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier
$349.99
• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier
$279.99
