2000 Watt HCCA Bass Package

Product Details:

• 12" Dual 2 ohm HCCA Series Subwoofer
• Power Handling:
• Peak: 10000 watts
• RMS: 2500 watts
• Moisture and UV-resistant Paper cone
• Nitrile Butadiene Rubber (NBR)-Foam surround
• Moisture and UV-resistant Polypropylene dust cap
• Tri-radius symmetrical edge design optimized on non-linear FEA
• Custom cast Aluminum frame
• 4" high-temperature Copper-Clad Aluminum voice coil
• Enhanced voice coil cooling system with gap vents
• Screen meshed areas to allow venting below spider
• Cast aluminum top pole piece heat sink with fins and vent hole
• Top flat interlaced Conex spider
• Bottom flat interlaced Conex spider with stitched and looped tinsel leads attached
• 30.1875 mm Xmax
• 445 oz. Triple Stacked Ceramic magnet motor structure
• One pair (each side) of custom Allen head screw terminals
• Frequency Response: 24 - 100 Hz
• Resonance Frequency (Fs): 32.3 Hz
• Sensitivity: 84.22 dB
• Recommended sealed box volume: 2.2 cubic feet
• Recommended ported box volume: 2.5 cubic feet
• Top-mount depth: 10.28"
• Cutout diameter: 11.5"
• Orion HCCA122RK recone kit sold separately
• Authorized Internet Dealer
• 
  

  Priced Individually

General Features:

• BB Series Monoblock Class D Car Amplifier
• RMS Power Rating:
• 4 ohm: 1200 watts x 1 chan.
• 2 ohm: 1800 watts x 1 chan.
• 1 ohm: 3000 watts x 1 chan.
• Max power output: 5000 watts
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink
• Input sensitivity:
• Low level: 100mV-6mV
• Variable low-pass filter (40-180 Hz, 12 dB/octave)
• Subsonic filter (12 dB variable from 20Hz - 50 Hz)
• Frequency response: 20-30,000 Hz
• 200-240 Amp in-line fuse required, see our selection of recommended fuse holders
• Depending on operating impedance, 1/0 or 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Note: Internal fuses are not included, so an external 200-240 Amp ANL Fuse is required to safely operate this amplifier.

Product Details:

• 1/0 Gauge 2-Channel Amplifier Installation Kit
• Designed for car audio systems up to 2000 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Belva CCA wire is made from 30% copper while the competition uses only 10%
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• ANL Fuse holder with a 150 amp fuse offers ideal protection for high powered systems
• Complies to American Wire Gauge standards
• Also available in Blue
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Red 1/0 gauge power wire
2. 3 ft. (.91 meters) Black 1/0 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. One ANL Fuse Holder with a 150 amp ANL fuse
6. One Black rubber firewall grommet
7. Three 1/0 Gauge red chrome plated ring terminals
8. One 1/0 Gauge chrome plated ring terminal
9. One 18 Gauge red Spade terminal
10. One 18 Gauge red butt connector
11. Eight 6" Black zip ties

Battery Features:

• 12-Volt AGM Car Battery
• Compatible with many domestic, Japanese and European car models
• Designed for various makes such as Jeep, Chrysler, Bentley, Nissan, and more
• Perfect for 2500W car audio stereo systems
• Also works as a secondary battery with a 4000-watt capacity
• Sealed Absorbent Glass Mat (AGM) design
• Reinforced ABS plastic case
• Leak-proof, non-hazardous design
• Stores energy so you don't need a capacitor for your system
• Resists extreme vibrations for ultimate performance
• Fits in almost any factory battery location
• Enough power to crank the highest performance engines
• Extreme heat resistance
• 100% Sealed and maintenance free
• M6 Terminal hardware included
• Dimensions: 10.24""W x 6.89""D x 7.16""H
• Authorized Internet Dealer
• 3 Year Manufacturer's Warranty

Battery Specifications:

• BCI Group: 34
• Battery Type: Absorbent Glass Mat (AGM)
• Nominal Wattage (Primary Battery): 2500 watts
• Nominal Wattage (Secondary Battery): 4000 watts
• Nominal Voltage: 12 volts
• Cranking Amps: 1150
• Cold Cranking Amps: 1012
• Maximum Output: 3300 amps
• Amp Hours: 80 Ah
• Reserve Capacity: 160 minutes
• Weight: 49.97 lbs.

General Features:

• Secondary Battery Installation Kit
• 1/0 gauge Pre Ring terminated power and ground wire with protective heat shrink wrap
• Designed for systems up to 3000-3500 watts
• Thick but flexible Copper Clad Aluminum wiring
• 100% OFC (Oxygen-free Copper Version) also available
• XP FLEX Frosted Black ground wire
• XP FLEX Frosted Blue ground wire
• Fuse Holder Dimensions: 4-3/4"W x 1-1/2"D x 1-1/2"H
• Also found as: xsp-ak3000, AK 3000
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Recommended Accessories:

• A Battery Isolator is STRONGLY recommended when installing a second battery:
• Prevents secondary battery from draining the starting battery
• Big 3 Upgrade Kits:
  • To get the most out of your new power system check out our Big Three Upgrade Kits