JBL MS-A5001
Tested at 750W RMS on our Amp Dyno! (Rated 500W RMS by JBL), 1-Channel Monoblock Class D Car Amplifier with Digital Input Mixer and Graphical Status Display
Quantity: 1
General Features
- MS Series Monoblock Class D Car Amplifier
- RMS Power Rating:
- 4 ohm: 500 watts x 1 chan.
- 2 ohm: 500 watts x 1 chan.
- Sonic Electronix Certified Power Rating*:
- 4 ohm: 468 watts x 1 chan.
- 2 ohm: 692 watts x 1 chan.
- CEA-2006 compliant amplifier
- Digital signal processing amplifier
- Pulse Width Modulated MOSFET power supply
- Wireless Remote bass level input (JBL MS-WBC remote level control sold separately)
- Built-in display shows tone and gain settings
- Soft Start Turn-on
- Mono channel operation
- "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages
- Speaker-level inputs with signal sensing for automatic turn-on
- Preamp RCA outputs to daisy chain multiple amps
- 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
- Digital input-mixer control eliminates the need for Y adapters
- Heavy duty aluminum alloy heatsink for extreme heat dissipation
- CD for system setup included
- Gold-plated RCA level inputs
- Gold-plated screw terminals
- Input sensitivity: 100mV - 20V
- Signal to Noise Ratio: 80 dB
- Frequency Response: 20 - 270 Hz
- Selectable crossover slopes: 6 dB/oct, 12 dB/oct, 24 dB/oct
- Variable low-pass filter: 97 points from 20 - 140 Hz
- Variable high-pass filter: 97 points from 20 - 140 Hz
- Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H
- 4 - 8 gauge power and ground wiring is recommended for installation.
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.
![]() |
![]() |
General Features:
- 12" Dual 4 ohm GS Series Subwoofer
- Power Handling:
- Peak: 2000 watts
- RMS: 420 watts
- Mica reinforced cellular glass fiber cone
- Rubber surround
- Dual voice coil
- Top-mount depth: 5-5/8"
- Frequency Response: 20 - 600Hz
- Sensitivity: 83dB
- High energy Ferrite magnet
- Authorized Internet Dealer
- 3-year Manufacturer's Warranty
Single 12" Sealed MDF Subwoofer Enclosure (Belva MDFS12)
12-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (1.0 cu ft airspace 12SQTC)
Quantity: 1
General Features:
- Single Sealed 12" Enclosure
- Internal box volume: 1.0 cubic ft
- High Quality 3/4" MDF Construction
- Durable black carpeting
- Pre-lined with Poly-Fil
- Seams are fully caulked for better efficiency
- Gold post terminals for clean and easy wiring access
- Box Dimensions: 14-1/4"L x 14-1/4"D x 14-1/4"H
- 30 Day return policy
NVX XKIT82
100% Copper, 2-Channel True Spec 8 Gauge Amplifier Installation Kit w/ RCA Interconnect and 40 ft Speaker Cable
Quantity: 1
General Features:
- 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
- Designed specifically for car audio systems up to 600 watts RMS
- Premium power and ground wire provides optimal power transfer
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- Audio Interconnect RCA cables are made with twisted-pair technology for noise reduction
- Solid Brass and satin-chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
- True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
- Strand Count: 735
- BC-5W2 Compliant
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Kit includes:
- 20 ft. (6.1 meters) Frosted Blue 8 gauge power wire with seamless crimp ring terminal
- 3 ft. (.91 meters) Frosted Gray 8 gauge ground wire with seamless crimp ring terminal
- 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
- 40 ft. (12.2 meters) Frosted Gray/Blue 16 gauge speaker wire
- One 16 ft. (5 meters) 2-channel twisted construction RCA interconnect Cable (NVX XIV25)
- One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
- One 5/16" black rubber firewall grommet
- Two 8 gauge spade terminals
- Two black 16 gauge nickel-plated spade lugs
- Three blue 16 gauge nickel-plated spade lugs
- One black 18 gauge spade terminal
- Two 18 gauge red butt connector
- Ten 4" black zip ties























































