1250 Watt Full-Range 2-Channel Class-D Amplifier
Product highlights
• RMS: 400W x 2 @ 4 ohm, 620W x 2 @ 2 ohm, Bridged: 1250W x 1 @ 4 ohm
• Total RMS Power: 1250 watts
• Wet Sounds unique transformer
• Advanced Intelligent Microprocessor Control
• Top mounted crossover controls
• Dimensions: 9.82" W x 13.50" L x 2.70" H
The Sinister amplifiers are the highest power to size amplifiers anywhere in the world for car or marine use. The Sinister amplifiers use superior performance circuitry by utilizing Wet Sounds exclusive Class D Power Supplies combined with Wet Sounds MAXED Power supply. The MAXED power supply is a patent pending technology designed to provide high efficiency levels never thought to be achievable in a mobile audio amplifier. What this means to you. Less current draw, less strain on the electrical system, less generated heat. All this results in more play time! The Sinister amplifiers share one size full cast aluminum chassis for all models making installation a breeze and the ability to have a clean install.
Sinister amplifiers feature a fully conformal coated 4 layers pcb board, single side power, speaker & input section, & top mounted controls with removable cover. In addition, high pass/low pass/full range crossovers, flexible inputs source selection for single or multiple RCA channel input, & removable speaker plugs make the Sinister Series a proper amp for proper installs.
The Sinister amplifiers are not only extremely powerful but also intelligent with a built in microprocessor controller for over voltage protection, under voltage protection, DC offset & speaker short protection, as well as thermal rollback to ensure consistent play in the harsh environments. Wet Sounds has taken every measure to ensure that their amplifiers are Built to Last.
Sinister amplifiers have a back lit Wet Sounds shield logo with selectable illumination for red, white or blue that can be mounted horizontally or vertically. This is perfect for installations where you are not having to re-wire just to get the logo straight. The Wet Sounds shield logo badge not only looks great but also provides the amplifier status through its acrylic spacer.
|
(newest, current model)
|
|
(previous model, replaced by Wet Sounds SD2)
|
Best selling similar products
• 75 watts x 2 channel + 250 watts x 1 channel @ 4 ohm
• 100 watts x 2 channel + 400 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm + 400 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 3-Channel Amplifier
$499.99
Rockford Fosgate Punch PM500X2
• 150 watts x 2 channel @ 4 ohm
• 250 watts x 2 channel @ 2 ohm
• Bridged: 500 watts x 1 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class A/B 2 ohm Stable 2-Channel Amplifier
$499.99
• 150 watts x 6 channel + 250W x2 @ 4 ohm
• 225 watts x 6 channel + 400W x 2 @ 2 ohm
• Bridged: 450 watts x 3 channel + 850W x1 @ 4 ohm
• Total RMS Power: 2200 watts
• Class D 2 ohm Stable 8-Channel-Channel Amplifier
$449.99
• 50 watts x 4 channel + 200 watts x 1 channel @ 4 ohm
• 75 watts x 4 channel + 350 watts x 1 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total RMS Power: 650 watts
• Class D 2 ohm Stable 5-Channel Amplifier
$519.00
• 50 Watts x 4 + 200 Watts x 1 @ 4 ohm
• 100 Watts x 4 + 350 Watts x 1 @ 2 ohm
• 200 Watts x 2 + N/A @ 4 ohm Bridged/Mono
• 5-Channel Amplifer
• Element Ready™ design protects against outdoor exposure
• Top Mounted Control Panel
$519.99
• 75 watts x 6 channel @ 4 ohm
• 100 watts x 6 channel @ 2 ohm
• Bridged: 200 watts x 3 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 6-Channel Amplifier
$724.99
• 400 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable Monoblock Amplifier
$524.99
• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
$279.99
• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$649.99
• 100 Watts RMS x 2 @ 4 ohm
• 200 Watts RMS x 2 @ 2 ohm
• Total Peak Power: 400 Watts
• Marine and Powersports Certified
• Built-In Low-Pass and Hi-Pass Filters
• Aluminum Heatsink
• Dimensions: 3.7" W x 5.51" L x 1.77"
$109.99
Internal Product ID:
93101
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology
Comes with everything you need to upgrade your power and ground wire.
Features everything needed to upgrade factory power and ground wire.
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
