1000W RMS Punch Series Class-BD Monoblock Marine Amplifier
• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class BD 1 ohm Stable Monoblock Amplifier
• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class BD 1 ohm Stable Monoblock Amplifier
The PM1000X1bd is a 1000 Watt Monoblock amplifier with high dynamic power using Class-bd technology and a conformal coated pc board designed for motorsport and marine applications. Don't let the small footprint fool you (2.38" x 7.76" x 13.28"), the PM1000X1bd is packed with industry leading technology. Rockford Fosgate does not simply paint an amplifier white and call it "Marine Grade"; with corrosion resistant stainless steel hardware and two-part epoxy coated circuit boards, these units are designed with the most extreme elements in mind. Regardless if you're driving typical speakers or two subwoofers, the hefty output capability will deliver the right amount of PUNCH that you want wherever you take it!
Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in accordance with ASTM D4326 testing and certification procedures. Rockford Fosgate moto-marine amplifiers not only have the capabilities you expect a Rockford amp to have, but they have been designed to stand up to the environmental conditions you are likely to subject them to.
Take the headache out of tuning your amplifier. Rockford Fosgate’s integrated level setting technology called CLEAN (Calibrated Level Eliminates Audible Noise), utilize simple LED indicators to identify both signal clipping from the audio source and the output level clipping to the speakers. This precise level set-up eliminates speaker damaging distortion.
Rockford Fosgate Punch Marine PM1000X1bd Manual
Internal Product ID:
94305
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Controls bass level and frequency and monitor voltage
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
Comes with everything you need to upgrade your power and ground wire.
Features everything needed to upgrade factory power and ground wire.
12-Volt Deep Cycle Sealed Non-Spillable Lead Acid AGM Battery Power Cell with 3300 Max Amps (BCI Group 34)
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Best selling similar products
• 75 watts x 2 channel + 250 watts x 1 channel @ 4 ohm
• 100 watts x 2 channel + 400 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm + 400 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 3-Channel Amplifier
$499.99
• 50 Watts x 4 + 200 Watts x 1 @ 4 ohm
• 100 Watts x 4 + 350 Watts x 1 @ 2 ohm
• 200 Watts x 2 + N/A @ 4 ohm Bridged/Mono
• 5-Channel Amplifer
• Element Ready™ design protects against outdoor exposure
• Top Mounted Control Panel
$519.99
Rockford Fosgate Punch PM500X2
• 150 watts x 2 channel @ 4 ohm
• 250 watts x 2 channel @ 2 ohm
• Bridged: 500 watts x 1 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class A/B 2 ohm Stable 2-Channel Amplifier
$499.99
• 75 watts x 2 channel @ 4 ohm
• 100 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 2-Channel Amplifier
$499.99
• 100 watts x 4 channel @ 4 ohm
• 200 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$484.96
• 75 watts x 6 channel @ 4 ohm
• 100 watts x 6 channel @ 2 ohm
• Bridged: 200 watts x 3 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 6-Channel Amplifier
$799.99
• 50 watts x 4 channel @ 4 ohm
• 70 watts x 4 channel @ 2 ohm
• Bridged: 140 watts x 2 channel @ 4 ohm
• Total RMS Power: 280 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$329.99
• 300 watts x 1 channel @ 4 ohm
• 400 watts x 1 channel @ 3 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier
$449.99
• 200 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• CEA-2006 Compliant
• Class D 2 ohm Stable Monoblock Amplifier
$279.00
• 400 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable Monoblock Amplifier
$599.99
