1350W 10" Series III Subwoofer with Selectable 2-Ohm or 4-Ohm Impedance
• 450 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI (Selectable Smart Impedance)
• Oversized 3.0" Voice Coil
• Premium 8 AWG Screw-down Terminals
• Sensitivity: 91dB
• 450 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI (Selectable Smart Impedance)
• Oversized 3.0" Voice Coil
• Premium 8 AWG Screw-down Terminals
• Sensitivity: 91dB
JBL believes sound quality should never be compromised. And Series III subwoofers make sure you don't have to compromise flexibility, either. That's because the high-performance, step-up subwoofers feature SSI (Selectable Smart Impedance), an exclusive impedance switch that lets you select the optimum impedance—2 or 4 ohms—for your system. Special aero-cooling design in the voice coil boosts power handling as well as reliability. And an oversized voice coil handles more power than common two-inch voice coils. More power, more reliability, more flexibility—and no compromising. When you're ready to step up, Series III is your subwoofer.
Most car audio system designs call for 2- or 4-ohm impedance. Series III subwoofers feature an exclusive dual impedance switch that lets you choose either load impedance option. Not available from any other manufacturer, SSI lets you reconfigure your system by simply flipping a switch.
Aero-cooled voice coilThe Series III voice coil significantly increases power handling and improves reliability by going with the flow—of air. The woofer's motor channels air pumped by the cone movement past the voice coil, and the voice coil former exposes the coil's inner and outer surfaces to the airflow. This aero-cooling design is unique among aftermarket subwoofers.
Oversized voice coilThe three-inch (75mm) voice coil proves you don't have to be a heavyweight to pack a serious punch. It handles more power than conventional two-inch voice coils, yet it's lighter than four-inch voice coils. It strikes the perfect balance between thermal power handling and low mass.
Premium screw-down terminalsPower is the lifeblood of any subwoofer. The terminals on the Series III accommodate up to 8-guage wire (8.37mm2 cross section), which transfers low-resistance, low-loss power to the woofer, even over long wire runs. This ensures the subwoofer—and your music—has the power it needs.
Sonic Electronix, one of the leaders in car audio, recently visited Harman, the premium global audio and infotainment group, at their research and development locations in Northridge, California and Detroit, Michigan. The purpose of these visits was to utilize and combine the powerful brand of Harman and the industry leading knowledge behind Sonic Electronix to begin working together on developing future car audio projects.
Priced Individually
Check out the JBL S3-1024 Owner's Manual
*Infinite-baffle mounting is possible, but the subwoofer's mechanical power handling will be reduced because there will be no volume of air to stiffen the subwoofer's suspension and prevent overexcursion. If you choose infinite-baffle mounting, consider the RMS and peak power-handling ratings to be half of what is listed
PROP 65 WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer or birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
|
(newest, current model)
|
|
(previous model, replaced by JBL Stadium 1024)
|
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Internal Product ID:
98700
| 5 star |
|
83% |
| 4 star |
|
17% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Very nice sub
I matched this to my JBL GTI 660's. I am running a pioneer amp to this sub and its awesome!. Clean, hard bass. Kicks like a mule!
6
found this helpful.rockford head
First off, I work at a car audio shop in virginia . I 've been in the industry since 1998 . I bought a couple of these subs thinking of moving to four in the very near future.I replaced 2 re se subs with these . I am very pleased with the sound and responce of these .
They seem to have more punch than the re's.
The only thing that disturbs me is jbl lists a 3 " voice coil but they only have a 2 1/2" v.c. , i did not know this until i opened the box
One look and i knew something was amiss . And sure enough the paperwork that comes with the sub says 2 1/2" .
6
found this helpful.BEAST MODE!
Looking for a heavy duty sub with serious bass, look no further. I bought this sub just under 2 months ago and I could not be more pleased. The screw down terminals make a huge difference in sound and performance. When I first got this sub, I was running 16 gauge speaker wires and when I installed 8 gauge wires to the sub, I noticed a huge difference. My sub instantly sounded more bold and clear. Lastly, I really like the build quality of this sub. Everything feels very high quality and sturdy unlike some of the other brands that I have owned in the past.
Verified purchase
6
found this helpful.JBL S3-1024 **Toggle between 2-Ohm & 4-Ohm Impedance!**
Definitely worth every cent. Veryy powerful for a 10 inch woofer.
5
found this helpful.Nice looking subwoofer
Pros:Looks
Reputable brand.
Impedance switch
Very detailed subwoofer.
Cons:Tinsel leads not sewn to spider.
Plastic magnet hides the size of it.
Verified purchase
5
found this helpful.under the radar steal
a lot of people go for the marketing hype, JL, rockford blah blah .. JBL put out a monster sub at this price, it does about 500W and just looking at the heavy duty build when you unbox this you know you got yourself a lot of bang for the buck. it delivers, this thing blows away the competition. just make sure you have enough watts from your amp bc it would be shame to underpower this beauty
Verified purchase
5
found this helpful.
100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
Best selling similar products
• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB
$499.99
• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.90"
• Sensitivity: 85 dB
$114.99
• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB
$129.99
• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.90"
• Sensitivity: 85 dB
$114.99
• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 4.92"
• Sensitivity: 85 dB
$49.99
Kicker L7T102 (46L7T102) (Sold Individually)
• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• SoloKon Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 3-3/4"
• Sensitivity: 85.98 dB
$249.99
• 10" ReFLEX™ Passive Radiator
• Rubber covered plastic Cone
• Rubber Surround
$59.99
Kicker CWRT104 (48CWRT104) (Sold Individually)
• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 3-7/16"
• Sensitivity: 84.8 dB
$159.96
NVX NSW102 Version 3 (NSW102v3)
• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.36"
• Sensitivity: 85 dB
$69.99
NVX NSW104 Version 3 (NSW104v3)
• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.36"
• Sensitivity: 85 dB
$69.99
