See all parts that fit your 2011 Ghost
600W RMS M-Series Monoblock Class D Marine Amplifier
Product highlights
• 600W x 1-Chan @ 2 Ohm
• NexD Ultra-High Speed Topology
• Preamp RCA Outputs
• Variable High/Low-Pass Filter
• 3-Way System Protection Circuitry
• Remote Bass Input
3.5" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$189.99
List price $211.99
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$179.95
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$156.99
List price $174.99
10" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$250.00
List price $275.00
120W Peak (60W RMS) Cage Mount Speaker Pods with 1.75" Clamp
$399.99
120W Peak (60W RMS) Cage Mount Speaker Pods with 2" Clamp
$399.99
DS18 PRO-1.5KP10.4 (Sold Individually)
3000W Peak (1500W RMS) 10" PANCADÃO Series 4-ohm Mid-bass Speaker
$263.95
This potent monoblock amplifier employs JL Audio's high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in an ultra-compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious power, delivering a full 600W of continuous total power into a 2 ohm load (14.4V, 1% THD). Targeted specifically for an audiophile-grade system, the M600/1 includes a variable mode low-pass filter with a continuously variable cutoff frequency selection from 50-500 Hz.
With the addition of an HD-RLC remote level control (sold separately), you can control the volume of the M600/1 sub channel from the front of the vehicle or boat. This amplifier features white and grey powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
JL Audio's signature Advanced Thermal Rollback protection system eliminates annoying thermal shutdown events to keep the music playing, even under the most demanding conditions. Should the amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases.
From the same minds that gave us the technology found in the 'Slash' amplifiers, JL Audio has taken the simple fixed PWM design approach and enhanced it with a very high switching frequency. Full-range NexD™ amplifiers and channels feature a variable, ultra-high speed version of the NexD™ technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with "feed-forward" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.
JL Audio M600/1
600W Monoblock M-Series Class D Marine Amplifier
Quantity: 1
 |
 |
JL Audio C3-570cw owner’s manual
|
(newest, current model)
|
|
(previous model, replaced by JL Audio M600/1 Amplifier (Open-Box, Like-New, Damaged Packaging))
|
|
(previous model, replaced by JL Audio Marine M1700)
|
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Best selling similar products
• 80 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(41)
$209.99
List price $239.99
• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier
(46)
$349.99
List price $419.99
• 800 watts x 1 channel @ 4 ohm
• 1350 watts x 1 channel @ 2 ohm
• 1700 watts x 1 channel @ 1 ohm
• Total RMS Power: 1700 watts
• Class D 1 ohm Stable Monoblock Amplifier
(35)
$259.99
List price $335.99
Manufacturer:
Model Number:
M600/1 (Open-box, Damaged Packaging)
Weight:
5.15lbs
Internal SKU:
m6001_obc8
Internal Product ID:
194643
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Rocks the Bryant!
I started a sound system upgrade on my 2011 Bryant 246 last season with a JL Audio 600/6 to four Polk DB seried 6.5" coaxial speakers and one Polk UM series 10" sub. It sounded really good, but this season I added the JL Audio 600/1 to the sub and now the boat rocks! I can hear and feel the music at any speed even when I drive with my head above the windshield. And as always, Sonic Electronix gave me a great price and superb service!
19 found this helpful
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(169)
$34.99
List price $59.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(63)
$34.99
List price $59.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(60)
$34.99
List price $59.99
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
(30)
$61.99
List price $68.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(7)
$66.99
List price $74.99
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
(11)
$35.99
List price $79.00
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(1)
$74.99
List price $159.00
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
$139.99
List price $167.99
2-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(124)
$109.99
List price $143.99
4 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire
(20)
$24.99
List price $49.99
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
(78)
$99.99
List price $131.99
NVX Remote Level Bass Control with Digital Voltmeter
Controls bass level and frequency and monitor voltage
(10)
$32.99
List price $99.99
Universal Remote Bass Level Control Knob
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
(8)
$7.99
List price $14.99
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
(5)
$39.99
List price $99.99
X Series RCA Interconnect Cable
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
(24)
$19.99
List price $29.99
NVX XWS1225 12 AWG Speaker Wire
25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
(56)
$29.99
List price $49.99
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
(43)
$6.99
List price $14.99
80 Amp Smart Relay Isolator (XSBI80)
Smart isolator - Monitors and auto-charging feature!
(2)
$24.99
List price $49.99
Great for isolating a second batter making it dedicated to the stereo system
(10)
$15.99
List price $19.99
200 Amp Smart Relay Isolator (XSBI200)
Smart isolator - Monitors and auto-charging feature!
(6)
$49.99
List price $79.99
200 Amp Relay Isolator (BIR200)
Great for isolating a second batter making it dedicated to the stereo system
(17)
$49.99
List price $59.99
500 Amp Smart Relay Isolator (XSBI500)
Smart isolator - Monitors and auto-charging feature!
(8)
$89.99
List price $109.99
500 Amp Relay Isolator (BIR500)
Does not create a voltage drop to the second battery like conventional isolators
(36)
$79.99
List price $95.99
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
(33)
$109.99
List price $131.99
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
(80)
$38.99
List price $79.99
Belva Nine Function Digital Multimeter
Perfect for any installation and troubleshooting
(7)
$9.99
List price $29.99
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal
Make installation a breeze with the XBTU
(19)
$14.99
List price $24.99
World's Smallest AFS / Mini ANL Fuse Holder
Accepts 4 gauge or 8-gauge wire
(15)
$9.99
List price $19.99
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
(11)
$4.99
List price $9.99
High Quality Element Resistant AGU Fuse Holder
Belva BAGUH2 AGU Fuse Holder
(2)
$4.99
List price $9.99
Modular Linkable ANL Fuse Block
Modular Linkable ANL Fuse Block
(4)
$14.99
List price $59.99
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output
No-fail termination and current flow, it helps keep your system protected and running smoothly
(50)
$12.99
List price $24.99
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
(6)
$7.99
List price $9.99
4 Pack of 80 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
(19)
$3.99
List price $8.99
4 Pack of 100 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
(17)
$3.99
List price $8.99
4 Pack of 150 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses
(11)
$3.99
List price $8.99
2 Pack of 100 Amp Nickel-Plated ANL Fuse
ANL 100A Nickel plated for better power transfer
(8)
$3.99
List price $7.99
2 Pack of 200 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 200 Amp ANL Fuses
(22)
$3.99
List price $7.99
2 Pack of 300 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 300 Amp ANL Fuses
(19)
$3.99
List price $7.99
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin
Great for amplifiers that do not accept a large gauge power wire
(23)
$9.99
List price $19.00
Pair of 4 Gauge Spade Terminals, #8 Opening
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
(7)
$1.99
List price $3.99
4 Gauge Ring Terminals, 5/16" Opening
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
(3)
$4.99
List price $6.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(8)
$2.99
List price $9.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(25)
$7.99
List price $9.99
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
(21)
$14.99
List price $19.99
In-Dash Flip-Out 7" CD/DVD/MP3/SD LCD Touchscreen Navigation Car Stereo Receiver w/ Built-In Bluetooth and iPod Controls
(1)
$239.99
List price $399.99
600W Max, 2-Channel Gothic Series Class AB Car Amplifier
(1)
$59.95
List price $119.99
Speaker Dock for iPad, iPhone and iPod with Built-In Subwoofer
(1)
$199.95
List price $299.95
Tru Spec Single 12 SUBP with Sundown Audio SA-12
Single 12" Vented Prefabricated High Out Enclosure with 2000W Peak (1000W RMS) 12" SA Classic Series Dual 2-ohm Car Subwoofer (SW-SACL12D2)
(1)
$574.98
List price $807.98
12qt. Cast Aluminum Non-Stick Casserole / Stock Pot (Dishwasher Safe)
$69.00
List price $89.00
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
