See all parts that fit your 1986 4000
700W Peak XDv2 Series 5-Channel Class D System Amplifier with High-Speed NexD Switching
• NexD Switching Technology
• Differential Balanced Input Section
• Advanced Rollback Protection
• Selectable Low-Pass Filter Slope: 12 dB or 24 dB
• Detented, Calibrated Filter Freq. Potentiometer

This potent 5-Channel amplifier employs JL Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious power, delivering a full 700 W of total continuous power into a 2 ohm load (14.4V, 1% THD) per channel. Targeted specifically for an audiophile-grade subwoofer + four satellite system, the XD700/5v2 includes a variable slope low-pass filter for the Subwoofer Channel and continuously variable cutoff frequency selection for all channels from 50-500 Hz - x10 capable for Ch 1/2. The XD700/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you can control the volume of the subwoofer channel (Subwoofer Level) or of the entire XD700/5v2 from the front of the vehicle (Master Volume). This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
JL Audio's signature Advanced Thermal Rollback protection system eliminates annoying thermal shutdown events to keep the music playing, even under the most demanding conditions. Should the amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases.
From the same minds that gave us the technology found in the 'Slash' amplifiers, JL Audio has taken the simple fixed PWM design approach and enhanced it with a very high switching frequency. Full-range NexD amplifiers and channels feature a variable, ultra-high speed version of the NexD technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with "feed-forward" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.
Belva BAK46
4 Gauge Premium (CCA) Copper Clad Aluminum Complete 5/6-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - RED
Quantity: 1
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Best selling similar products
Manufacturer:
Model Number:
XD700/5v2, BAK46
Weight:
11.75lbs
Internal SKU:
xd7005v2_bak46
Internal Product ID:
200908
Outstanding amp all around
Seriously, this amp rocks all around. I recently installed it in my Jeep Wrangler under the drivers seat and it's awesome having such a clean install with one amp running 5 channels. The foot print is very small for a 5 channel amp and having all the connections together makes it that much better.
Sound quality wise- this amp rocks it. It delivers more than enough power to my 2 sets of coax's (5.25's in the doors, 6.5's in an overhead soundbar) and the sub channel is most definitely underrated. I'm running two 2 ohm10's wired in series in a down firing box that are rated at 250w RMS and they sound/feel like they're driven by much more power than 300 watts.
Mids/highs are very crisp, clear, and balanced throughout regardless of the volume level, even when pushed towards max volume. This amp delivers nothing but crisp, clean power to all 5 channels. Best of all after a coup hours of listening at 75%+ volume! this little guy gets hardly warm to the touch. I can't speak much for durability since it's a fairly recent install, but nonetheless this amp is outstanding.
If you're looking for a compact, full-system amp that sounds killer and will fit many install applications, you can't go wrong. It's very well worth every penny. I ran another mainstream brands more entry-level amplifier prior to this and it blows it out of the water. It's a pretty penny for your average DIY car audio nerd looking for great sound but worth it!!!!!
70 found this helpful
Great Value/perfect Amp install kit for my 5 channel
This Amp install kit made it easy as I had 6 in to 1 rca cables on both ends and made it easier to fish in the wires Through the front to the back...
57 found this helpful
Excellent
Everything fit my amp as if they spoke with the manufacturer beforehand. the lengths are correct the RCA's I love them. The quality and feel!! I saw FEDEX coming and I felt like a little kid. Sitting at my dining room table pre-wiring and letting the cables get used to being straight again after being coiled in the package. You WILL NOT BE DISAPPOINTED!!!
55 found this helpful
quality
The RCA cable was really convenient. I was even able to cut it in the middle to fit it through a small hole and then solder it back together. (this did take a looong time but its possible)
Wire was quality too
54 found this helpful
Helpful kit
Great kit with everything you need to get your system going and can handle adequate power
50 found this helpful
Nice kit
The kit is complete with everything you need to install an amplifier and speakers.
Power and ground wire very flexible.
47 found this helpful
Nice kit
I bought this kit and am quite happy with it, the 4 gauge cable and RCA's seem to be of high quality along with the rest of the parts. only problem I had was the length of the power cable, in an avalanche I came up about 2ft short mounting the amp in the back of the truck so I had to go to the local shop to get a 2ft cable to make it from the fuse to the battery. would I buy this kit again yes.....
50 found this helpful
Just do it ..
I questioned whether the installation kit would really be "all that."
It was .. almost everything you need is included ... I opted for getting the quick connect/disconnect adapters for the speakers. Had those been in the kit I would have lost it.
Great quality, great layout, totally worth it.
47 found this helpful
Great Kit
Bought this and am sooo happy I did. Price was great and the quality of all the components is too. Even the speaker was great quality. Highly recommend.
47 found this helpful
Great price fast delivery
Great value for quality products and fast delivery will order again
43 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.