Universal-Fit Audio for 1981 Dodge Colt

---

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• For use with aftermarket sound systems or accessories like wenches
• Industrial-strength quadruple fuse holder
• Stainless steel hardware
• Also works in marine applications

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 5-Way high-voltage active crossover
• (2) front and (2) rear/sub inputs
• High/mid, high/mid/low, and mid/low outputs
• Features clip indicators

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• Install Bay Diode
• 1 AMP
• Package of 20 Diodes

• 12-volt Absorbent Glass Mat (AGM) Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 2500W car audio stereo systems
• Compatible with most vehicle applications

• Ported enclosure with 1 12" Solo-Baric L7S Series Subwoofer
• 750 watts RMS (1500 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 18-3/4" L x 16" H x 14-3/4" W x 17-7/8" W2

• Universal square terminal cup for speaker and subwoofer boxes
• Gold-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• IR Remote Controller for multimedia receivers
• Mode switch: AUD mode/DVD mode/TV mode
• Includes 2 AAA batteries

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• 6.5" Pro-Audio Horn Tweeter and 2.03" Compression Driver
• 640 watts Peak Each
• 320 watts RMS Each
• 8 ohm Impedance

• 12-volt to 5-volt Step-Down Interface
• Fixes audible 'pop' when aftermarket stereo turns on factory amplifier
• Designed for use in Ford, Lincoln, and Mercury vehicles

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.8 dB

• 20" Universal arrow-style replica antenna mast
• Made with durable fiberglass construction
• Includes 9 adapters and 2 rubber washers
• Simple screw-on installation, requires no vehicle modification
• Antenna mast color/design: Mossy Oak

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2.5 cubic feet
• High-output XXL enclosure with double flush baffle

• 5 Farad Digital Capacitor
• Carbon Fiber Design
• 5000 Watt Systems
• Digital Display

• 8" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .75 cubic feet
• Premium Black Carpet with Black NVX Logo

• 2-Channel 8000 Series RCA Interconnect Cable
• 3 ft. Cable Length
• Stinger Audiophile Grade
• Double Twisted Pair Construction
• Black Protective Jacket
• Triple Braided Shielding
• Locking Split-Tip Connectors
• Molded Strain Reliefs

• Male-female RGB solder connectors with heat sink
• Use with Stinger ENLIGHT10 and Race Sport COLORTRAIL LED Strip lights
• 8 Pack (4 male / 4 female)

• Bulk Pack of T-Tap Connector
• Allows for fast and easy splicing of wires
• Quickly tap into wires and cables
• Designed for tapping into 22/18 Gauge (AWG) wire
• Color: Red

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• 0.75" diaphragm for tweeter
• Designed for Cerwin Vega P75T tweeter
• East to install, no cutting or drilling required
• Improves high‑frequency performance

• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Split Loom Tubing
• Diameter: 1/8"
• Length: 100 Ft
• Material Type: Polyethylene
• Exterior Finish: Smooth
• Color: Black

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Enhanced Woven Fiber Paper Composite Cone
• Custom High Roll Foam Surround
• 30 mm Xmax (One Way)
• Sensitivity: 87.3 dB

• Dual 8-gauge input and output to 8-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• 36 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Entire Vehicle
• Pack includes nine 18" x 32" sheets

• 250 watts x 1 channel @ 4 ohm
• 350 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Features Qualcomm Quick Charge 3.0 - Can replace your cigarette lighter socket or add as a new one
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)
• Digital Volt Indicator display the status of your battery or your charging system

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• Ported enclosure with 2 12" CompR Series Subwoofer
• 1000 watts RMS (2000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 32-3/8" L x 16" H x 14" W x 17-1/4" W2

• Pair of 2-Way Universal Pod for 6.5" loudspeaker and 1.5" tweeter
• Enclosure comes in 1 set (left and right)
• Injected high density ABS plastic construction
• UV protected and all-element ready

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

• 500 FT/152.4 m Roll
• 16 Gauge
• Matte Blue wire
• Dual Conductor

• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• Ported truck enclosure with 1 10" Solo-Baric L7S Series Subwoofer
• 600 watts RMS (1200 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 21-1/2" L x 15" H x 10" W x 6-1/2" W2

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• 12" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.00 cubic feet
• Premium Black Carpet with Black NVX Logo

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.875"
• Color: Black

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.250"
• Color: Black

• Non-digital 150 farads capacitor
• Made for systems up to 1200 watts
• Includes mounting hardware for a secure installation

• Direct Connection to the factory harness
• Length: 5 feet
• Color coded wires for easy installation
• No cutting or splicing required

• 10" Dual Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.20 cubic feet
• Premium Black Carpet with Black NVX Logo

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• Digital Bass Reconstruction Processor
• Dash-mount remote control
• Speaker level inputs

• Modified Sine Professional Grade Power Inverter
• 2500 watts RMS, 5000 watts Peak
• Includes direct to battery cables
• LED digital display indicator
• Rugged industrial design

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.750"
• Color: Black