Universal-Fit Audio for 2000 Mazda Protege

---

• Universal Rear View Backup Camera
• High-Resolution CMOS PC1089 Image Sensor
• Mounting Style: Top of License Plate Frame
• Viewing Angle: 170 ° (super wide viewing angle)
• Resolution: 510 x 496 
• Waterproof: Yes (IP67/68 waterproof)
• Night vision: Infrared LED's

• Universal Application
• 9.66” full view monitor with touch screen operation.
• Wide angle HD front and rear camera.
• Collision detection sensor automatically locks the video in the event of a collision.

• 1" Replacement Diaphragm for Tweeters
• Compatible with most 1" tweeters
• Not compatible with M075T or M075T2 models
• Impedance: 2-ohm

• 400 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Dual Zone Proximity Sensor
• Dual zone sensing
• Protects both inside and outside of the vehicle
• Each zone is independently adjustable
• LED sensitivity test light
• Pre-wired 4-pin plug allows easy connection to all Omega systems

• True Spec 12 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Translucent EnvyFlex flexible multi-strand construction

• Universal Rear View Backup Camera
• Mounting Style: Full License Plate Frame
• Viewing Angle: 170 °
• Resolution: 720 x 480 
• Waterproof: Yes
• Night vision: LED's

• High Performance Windshield or Glass Mount Amplified Antenna
• Separate AM/FM Amplifiers • Ground wire for noise-cancellation
• LED Indicator confirms amplifier operation

• 2.4" Rear view mirror with front HD camera
• Adjustable 1080P HD front facing camera
• 1-Channel FHD DVR (Digital Video Recorder)
• Built-in motion detection, loop recording, park guide
• Includes built-in G-sensor, mic, and speaker
• Easily straps onto original mirror

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• 10-pack 1/0-gauge Heat Shrink
• Protect your cable crimp ends with style
• Color: Black

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.36"
• Sensitivity: 85 dB

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.50 Inches
• For JL Audio M880-ETXv3, M770-ETXv3 and MX770-ETXv3 speaker models

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• 12-volt Absorbent Glass Mat (AGM) Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 2000W car audio stereo systems
• Compatible with most vehicle applications

• RMS Power: 1500 watts
• Impedance: Dual 1.5 ohm
• Polypropylene Cone
• Polyester Foam Surround
• Mount depth: 10.50"
• Sensitivity: 86.3 dB

• Multi-Stage Charging
• Output Display
• Internal Cooling Fan
• Voltage Monitoring

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Computer-designed CNC cut

• 10" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 0.69 cubic feet
• Completely miter and dado end panels
• Premium carpeted finish
• Made in the USA

• 1" Titanium Compression Bullet Tweeters
• 100 watts Peak Each
• 50 watts RMS Each
• 4 ohm Impedance

• 22/18 Gauge Nylon Crimp Cap
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 22/18
• Color: Clear
• Count: 100

• Rear View Mirror with Backup Camera Monitor
• Built-in auto-dimming, temperature, and compass display
• Monitor Screen Size: 4.3"
• Monitor Screen Type: TFT LCD

• 1/0 AWG Inputs
• 4/8 Gauge Outputs
• Flat Black Finish
• Compact

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• Voltage converter stabilizer
• Input voltage: DC 8 volts - 40 volts
• Output voltage: DC 12 volts
• Maximum output current: 2 amps

• Wired Bass Remote for select 2013-2025 Punch and Power amplifiers
• Includes bass knob, cable, mounting clip, mounting screws
• Controls level on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox

• Wired marine remote control without display
• Compatible with select Clarion stereos
• Easily adds up to 3 remotes
• IP67-rated water resistant design

• Replacement Amplified Hide-Away Antenna for AM/FM Bands
• Active Magnetic-Type Antenna
• Works on the Magnetic Field

• SAE Top Post Battery Terminals
• Pair of positive or negative battery clamps
• Top-mounted or side-mounted options
• Machined brass construction with satin chrome finish

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 100 watts x 6 channel @ 4 ohm
• 150 watts x 6 channel @ 2 ohm
• Bridged: 300 watts x 3 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• Dual 1/0-gauge input and output to 4-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• Ring Terminals
• 5/16" Opening
• 0/1 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Master Ground Lug accepts multiple ground wires
• Stainless Steel lug with plated brass contact
• Aggressive star washers provide secure connection

• 30 Customizable Modes (including Patriot & Christmas)
• LEDCAST enabled
• Dual Remote controls
• Connect up to 4 zones
• Waterproof and Shockproof

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 4-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Universal Single DIN storage pocket
• Install Single DIN in a Double DIN dash opening
• Mounts above or below the stereo
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture

• 8-Channel digital signal processo
• 80 total bands of equalization
• TüN software offers quick input/output setup
• 8 RCA inputs or 1 optical input
• Includes DRC-200 digital remote control

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 7.47"
• Sensitivity: 85 dB

• Weatherproof Bluetooth Marine Receiver
• For use with hideaway remote audio receiver or dash-mount controller
• Connects with up to 35 ft (11 meters) of wireless range
• IPX8 marine-grade rating

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• HPM Series Battery Terminal with Two 1/0 or 4ga Outputs
• (2) 1/0 Gauge or (2) 4 Gauge outputs
• Ultimate power protection
• Multiple output design
• Corrosion resistant satin chrome finish

• 600W Peak
• 300W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• 1/0 Gauge Dual Amplifier Power Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• Two brass and satin chrome distribution blocks
• CEA-2015 and BC5W2 Compliant

• Modified Sine Professional Grade Power Inverter
• 3000 watts RMS, 6000 watts Peak
• Includes direct to battery cables
• LED digital display indicator
• Rugged industrial design
• Remote controller LCD included

• Dual USB Replacement Panel
• Replace the existing USB panel when installing a new car stereo
• Includes two 26" cables
• Compatible with 2017-up vehicles from Ford

• Install Bay Diode
• 1 AMP
• Package of 20 Diodes

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 4-Channel SwitchHub Solid-State Relay
• Single 40-amp output and triple 20-amp outputs
• 100-amp combined continuous capacity
• Outputs can be triggered independently

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 670 watts x 1 channel @ 4 ohm
• 1100 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 10.88"
• Sensitivity: 84.387 dB