Universal-Fit Audio for 2006 Volvo C70

---

• 500-amp Relay and Battery Isolator
• High current isolation relay designed for adding a secondary battery
• Prevents primary battery discharge when the vehicle engine is off
• Maximum Contact Rating: 500 amps
• Mechanical Life Cycle: 100000

• 2-Way Paging Remote Car Starter
• 5-Button LCD Transmitter
• 3000 feet of range (0.56 miles)
• Full high speed 2-way data to data

• 4-Channel SwitchHub Solid-State Relay
• Single 40-amp output and triple 20-amp outputs
• 100-amp combined continuous capacity
• Outputs can be triggered independently

• Peak Power: 2400 watts
• RMS Power: 1200 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 7.02"
• Sensitivity: 85 dB (1W/1m)

• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in

• 20 feet 8 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Specifically developed for Hertz MP 70.3 and Hertz MP25.3
• Two-position (0 / +2 dB) switch for tweeter level adjustments
• Pure copper wire low series resistance inductors

• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• 490 watts x 1 channel @ 4 ohm
• 780 watts x 1 channel @ 2 ohm
• 1300 watts x 1 channel @ 1 ohm
• Total RMS Power: 1300 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Spade Terminals • 8 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• 8" Amplified Loaded Subwoofer System
• 120 watts RMS (360 watts Peak)
• Built-In amplifier
• Variable bass boost
• Speaker-Level Inputs
• EBC wired remote bass level control

• Multi-Band Radar and Laser Detection
• Graphic Color OLED display with current speed, vehicle voltage, and alert area monitors
• User, pilot, arrow and meter modes
• Directional arrows provide true 360-degree awareness
• Installs on the windshield

• Works with power wire 8 gauge to 1/0 gauge
• Great for positive or negative connections to your battery
• Forged and machined 360 brass connection
• Elements and set screws have marine-grade, anti-corrosive Stannum plating

• Wired Bass/Treble Remote for select 2007-2025 Punch and Power amplifiers
• Controls bass on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox

• Dual 1/0-gauge input and output to 1/0-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• True Spec 16 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Twisted-pair technology eliminates noise

• OEM Alarm Shock Sensor Upgrade Kit
• Allows factory alarm systems to detect impacts to the vehicle
• Designed to interface for factory alarms extra sensor input

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Black

• 10" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .65 cubic feet
• Premium Black Carpet with Black NVX Logo

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 800 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• CEA-2015 and BC5W2 Compliant

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 7.4"
• Sensitivity: 87.50 dB

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• 12-volt Absorbent Glass Mat (AGM) Car Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 4000W audio stereo systems
• Compatible with many Domestic and Japanese vehicles

• 4 Gauge Solid Copper Ring Terminals
• Shrink Tubing
• Pure Copper with Nickel plating for optimal Current transfer
• Color: Black
• Count: 4

• 75 Amp Power Supply
• Built-In 4 Stage Smart Charger
• Overtemp Protection
• Deck Mounted Converter
• Max Output: 1065 Watts

• Wireless CB radio with digital noise cancellation
• 4 watts maximum power output
• 40 CB full channel coverage
• Dual-mode communication on AM/FM on all 40 channels
• Auto squelch control blocks noise
• Instant emergency channel 9 and information channel 19

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Peak Power: 800 watts
• RMS Power: 200 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• Treated Foam Surround
• Mount depth: 3.54"
• Sensitivity: 83.1 dB

• 3.5" Pro Audio Bullet Tweeters
• 240 watts Peak Each
• 120 watts RMS Each
• 4 ohm Impedance

• Water-resistant RGB LED Controller
• Designed in tandem with RGB MPS app
• Select from 10 speeds and 20 modes
• Sync LED to your music via Smartphone Bluetooth feature
• Compatible with MPS-RGBWWS4 (Sold separately)

• Single Knob Surface Mount Housing Pod
• For use with Belva BAWLK, BA2USB or BAVTM

• Pair of Bass Blockers For 6" Speakers
• Blocks 0-600 Hz @ 4 Ohm
• Blocks 0-300 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts

• Amplified AM/FM Glass Mount Antenna
• Slim Style for Compact Installation
• Mounts in Glass or Windshield
• 12 Foot Cable Length

• Rear parking sensors with waterproof connectors
• Audible buzzer with volume adjustment
• Total Number of Sensors: 4
• Detection Distance: 1 feet to 5.9 feet

• Universal spacers for car speakers
• Includes 2 spacers (screws not included)
• Compatible Speaker Size: 6.5"
• Spacer Thickness: 0.5"

• 12" Amplified Loaded Subwoofer System
• 250 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs

• Universal amplifier turn on/off timer
• Easy 4 wire installation
• Color coded wires

• 5 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Black

• 220 watts x 4 channel @ 4 ohm
• 330 watts x 4 channel @ 2 ohm
• Bridged: 660 watts x 2 channel @ 4 ohm
• Total RMS Power: 1320 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Media Master Remote controller cable
• 6-foot Extension Cable

• 180 watts x 4 channel @ 4 ohm
• 270 watts x 4 channel @ 2 ohm
• Bridged: 540 watts x 2 channel @ 4 ohm
• Total RMS Power: 1080 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Replacement Amplified Hide-Away Antenna for AM/FM Bands
• Active Magnetic-Type Antenna
• Works on the Magnetic Field

• High Performance Windshield or Glass Mount Amplified Antenna
• Separate AM/FM Amplifiers • Ground wire for noise-cancellation
• LED Indicator confirms amplifier operation

• Modified Sine Professional Grade Power Inverter
• 3000 watts RMS, 6000 watts Peak
• Includes direct to battery cables
• LED digital display indicator
• Rugged industrial design
• Remote controller LCD included

• 2-Way 5-Button Remote Start and Car Alarm LED Transmitters
• Includes (1) 2-way LED transmitter and (1) 1-way transmitter
• 1 mile range
• Compatible with Viper DS4 and DS4P security systems

• 400 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Universal Double-DIN trim rings
• For Double-DIN radio installations

• 230 watts x 2 channel @ 4 ohm
• 480 watts x 2 channel @ 2 ohm
• 700 watts x 2 channel @ 1 ohm
• Bridged: 960 watts x 1 channel @ 4 ohm
• 14000 watts @ 2 ohm
• Total RMS Power: 700 watts
• Class D 1 ohm Stable 2-Channel-Channel Amplifier

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 4-ohm
• CA glue adhesive is NOT included

• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• 1-Way Remote Start, Keyless Entry and Car Alarm System
• Includes (2) 4-button LED remote control transmitter
• 1/4 mile (1320 ft) range
• Antenna with integrated valet switch and LED

Stacking Hardware for Three Slash v2 Amplifiers
• Made With JL Audio High Quality
• Precision Machined
• Colored Black

• Peak Power: 700 watts
• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Paper Fiber with Mica Coating Cone
• Rubber Surround
• Mount depth: 5.32"
• Sensitivity: 82.2488 dB