Universal-Fit Audio for 2016 Aston Martin DB9

---

• 100A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• Ideal for OEM non-amplified sound systems
• Designed to generate load and stabilize signal
• Installed between factory speakers and lime output converter
• Pre-wired with EIA standard wire colors for front and rear connections
• 60 Ohm input impedance
• 150W Maximum input voltage

• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 200 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1300 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design • RMS Power: 1200 Watts
• 3” 4-Layer High-Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple-stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• For Systems Up To 1200 Watts
• Bright Blue LED Voltage Display
• Improves Bass Response (SPL)

• Dual-channel FHD camera and built-in DVR
• 150-degree viewing angle
• 6G SONY camera lens
• Surface or flush mounting options for cameras
• 5 foot of cable at each camera
• G-Sensor to prevent overwriting video recordings in the event of a collision

• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP

• (2) 1/0 ga inputs for power
• (4) 4/8 ga MANL fused power outputs
• >Small Footprint with compact brass design
• All in one compact block

• NVX Remote Level Controller with Digital Voltmeter
• Can adjust the amplifier gain even while driving
• In-dash or Under-dash mountable
• Compatible with most head units/amplifiers combinations
• Blue LED display (high voltage / low voltage)

• Works with Most 5-1/4" Speakers
• Factory Style Finishes
• Heavy Duty ABS Plastic
• Works with 6" to 6.5" Speakers

• Swivel Mount Fixture
• For PS650-VeX models
• Designed to mount two VeX Pods
• Patented and American-made by Axia Alloys
• Inner diameter of 1.750"

• 20 square feet sq. ft Sound Damping Liquid Coating
• Material Used: Vibration Dampener
• Material Thickness: 0.080"
• Install Location: Universal
• Contains 1 gallon of liquid spray

• Dual Side View Blind Spot Camera Kit
• Compatible with 2007-2018 Jeep Wrangler JK (2-Door and 4-Door models)
• Mounting Style: Bracket Mount
• Viewing Angle: 80 degrees
• Resolution: 648 x 488 (CVBS) / 1280 x 720 (AHD)
• Waterproof: IP67
• Nightvision: Low-light at 0.1 lux

• RPM marine wake tower speakers flat mount bracket
• Designed for SMC/VMC marine tower speaker pods
• Ideal for surface or deck mounting
• Sleek black stylish finish to match factory design

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.6 dB

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Computer-designed CNC cut
• Total box volume: 3.50 cubic feet

• 12" Cast Aluminum Subwoofer Grille
• Enhances the Look of your 08 Series Kicker Solo-Baric Subwoofers
• Protects the Sub from Damage
• Gives your Woofer an Attractive Look

• 100A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• 2-Channel Line Out Converter
• 2 inputs and 2 outputs
• Compact design

• 150 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• 400 watts x 1 channel @ 1 ohm
• Total RMS Power: 400 watts
• Class D 1 ohm Stable Monoblock Amplifier

• IR Remote Controller for multimedia receivers
• Mode switch: AUD mode/DVD mode/TV mode
• Includes 2 AAA batteries

• 20 ft. 18 Gauge 9 Conductor Speed Speaker Wire
• Great for a 4-channel amplifier setup
• EIA standard easy color-coded copper wires
• Easy and fast installations
• Color: Blue

• Rear View Mirror with Backup Camera Monitor
• Built-in auto-dimming, temperature, and compass display
• Monitor Screen Size: 4.3"
• Monitor Screen Type: TFT LCD

• iPhone, Android & Bluetooth Device Ready
• One Knob Controls it all - Track, Pause & Volume
• Flush in Dash or Under Dash Mounting options
• Add-on to any Radio or Device with AUX input

• 2-Channel Speaker Wire to RCA Adaptor for High-Level Signal Connection to Amplifiers
• Left and Right Channel Male RCA Plugs to Parallel Speaker Cable
• Satin Black Jacket

• Universal 10" Speaker and Subwoofer Grille
• Designed for high-excursion speakers and subwoofers
• Satin black powder-coated finish
• Mounting hardware included

• 330 watts x 4 channel @ 4 ohm
• 500 watts x 4 channel @ 2 ohm
• Bridged: 1000 watts x 2 channel @ 4 ohm
• Total RMS Power: 2000 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 8-Channel Digital Signal Processor
• Designed to integrate with aftermarket or factory OEM systems
• Integrated LCD display and intuitive interface
• Includes 2 audio inputs and 8 independent outputs
• 15-graphic equalizer with separate parametric equalizers

• Replacement Viper Remote / LCD Pager For Select Viper Alarms

• 150A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• 3" Dual View Dash Camera with 4K HD Video Resolution
• Includes a rear-view accessory camera
• Apple CarPlay and Android Auto support
• Loop-cycle recording
• Front Camera Resolution: 4096p x 2160p
• Rear Camera Resolution: 1920 x 1080p

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• 36 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Entire Vehicle
• Pack includes nine 18" x 32" sheets

• 1/0 Gauge Dual Amplifier Power Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• Two brass and satin chrome distribution blocks
• CEA-2015 and BC5W2 Compliant

• 1/0 AQWG Fuse Holder
• Lok-Nut style fasteners
• Water resistant

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 15" SoloX Series Dual 2-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 2-ohm
• Alignment shims are included for installation

• 6x9" Punch V2 Surface Mount Speaker Mesh Grilles
• Designed for use in select Rockford Fosgate Punch V2 speakers
• Surface mount design installs directly onto mounting surface
• Ideal for applications that disregard grille height

• 12" Single Shallow Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Shallow construction and downward firing design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.47 cubic feet

• Commercial Grade Bus/Truck Blind Spot System
• Dual wide view camera with 150° angle
• AHD camera chipset for super clear image quality
• Split view LCD monitor
• Water resistant aviation connectors
• 64GB micro SD card included

• 600W Peak
• 300W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• 12-volt Absorbent Glass Mat (AGM) Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 2000W car audio stereo systems
• Compatible with most vehicle applications

• Dual 8-gauge input and output to 8-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• 2-Channel Speaker to RCA Cable
• Split-Pin RCAs
• 16 Gauge Speaker Wire to RCA
• K-Grip Line & K-Grip Connectors
• Ergonomic Design • 2 Feet

• Works with your JL Audio LED speakers
• Control lighting colors and the intensity of your lighting
• Compact system can be installed in almost any application
• Built-in over-current and short-circuit protection
• Built-in voltage and temperature monitoring

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 2-Way 5-Button Remote Start and Car Alarm LED Transmitters
• Includes (1) 2-way LED transmitter and (1) 1-way transmitter
• 1 mile range
• Compatible with Viper DS4 and DS4P security systems

• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Computer-designed CNC cut

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• Waterproof Hideaway Bluetooth Audio Receiver
• Bluetooth 5.0 technology
• Designed for marine and powersports vehicles

• Universal Double-DIN trim rings
• For Double-DIN radio installations

• 600 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 3 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• Battery Isolator and Relay
• 500 Amp
• Prevents Primary Battery Discharge
• Maximizes the Current Transfer
• Extends Battery Life
• Universal 12V Applications