Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Amplifiers
  4. Discontinued Monoblock Amplifiers

Discontinued Monoblock Amplifiers

Match Amps to Subs
Filters
Subwoofers ✕
Clear Filters
Reset Done
Product Type
Subwoofers,
Price Range
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.
Top-Mount Depth (Mounting Depth)
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Find compatible amplifiers for subs you own or want with our powerful AmpliFinder® tool.

Match Amps to Subs

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

JBL Series II 550 Watt RMS Dual 12" Bass Package (S21224 + GTX500)

Two JBL Series II 12" Subwoofers with Selectable 2 Ohm or 4 Ohm Impedance + GTX Series Class-D Monoblock Amplifier with Installation Kit

Share Deals
& Save Money

Learn More

Give 5% Off
& Earn 5% Commission*

Learn More

Premier Car Audio Partner

Learn More

Sign Up Now

Email

errors

Phone Number

First Name

errors

Last Name

errors

Mailing Address

errors

Company

What do you drive?

errors

How will you share Sonic Electronix?

errors
submitted!
S21224X2_GTX500_BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL Series II 550 Watt RMS Dual 12" Bass Package (S21224 + GTX500)

Two JBL Series II 12" Subwoofers with Selectable 2 Ohm or 4 Ohm Impedance + GTX Series Class-D Monoblock Amplifier with Installation Kit

• 1100W Max Each 12" Series II Car Audio Subwoofer
• Oversized 2.0" Voice Coil
• JBL Mono Subwoofer Amplifier
• Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

Promo Savings Icon

Share Deals
& Save Money

Learn More

Give 5% Off
& Earn 5% Commission*

Learn More

Premier Car Audio Partner

Learn More

Sign Up Now

Email

errors

Phone Number

First Name

errors

Last Name

errors

Mailing Address

errors

Company

What do you drive?

errors

How will you share Sonic Electronix?

errors
submitted!

• 1100W Max Each 12" Series II Car Audio Subwoofer
• Oversized 2.0" Voice Coil
• JBL Mono Subwoofer Amplifier
• Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

EXCLUSIVE

2 Alpine R-W12D4 + Hifonics HFi1500D + Belva BAK42BK Bass Package

2 12" Subwoofer Bass Package with 1500 RMS Amplifier and 4 Gauge Wiring Kit

R-W12D4 HFi1500D PKG big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

2 Alpine R-W12D4 + Hifonics HFi1500D + Belva BAK42BK Bass Package

2 12" Subwoofer Bass Package with 1500 RMS Amplifier and 4 Gauge Wiring Kit

• 2250W Max
• 750W RMS
• Parabolic pulp/kevlar cone
• H.A.M.R. surround
• Cast aluminum frame with integral shorting sleeve
• Polypropylene, mica and talc dust cap
• 127 oz. Strontium ferrite segmented magnet

214

• 2250W Max
• 750W RMS
• Parabolic pulp/kevlar cone
• H.A.M.R. surround
• Cast aluminum frame with integral shorting sleeve
• Polypropylene, mica and talc dust cap
• 127 oz. Strontium ferrite segmented magnet

JBL Series II 500 Watt RMS Dual 10" Bass Package (S21024 + GTX500)

Two JBL Series II 10" Subwoofers with Selectable 2 Ohm or 4 Ohm Impedance + GTX Series Class-D Monoblock Amplifier with Installation Kit

S21024X2_GTX500_BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL Series II 500 Watt RMS Dual 10" Bass Package (S21024 + GTX500)

Two JBL Series II 10" Subwoofers with Selectable 2 Ohm or 4 Ohm Impedance + GTX Series Class-D Monoblock Amplifier with Installation Kit

• 1000W Max Each 10" Series II Car Audio Subwoofer
• Oversized 2.0" Voice Coil
• JBL Mono Subwoofer Amplifier
•Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

• 1000W Max Each 10" Series II Car Audio Subwoofer
• Oversized 2.0" Voice Coil
• JBL Mono Subwoofer Amplifier
•Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

JBL Series III 450 Watt RMS 10" Bass Package (S31024 + GTX500)

JBL Series III 10" Subwoofer with Selectable 2 Ohm or 4 Ohm Impedance + GTX Series Class-D Monoblock Amplifier with Installation Kit

S31024_GTX500_BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL Series III 450 Watt RMS 10" Bass Package (S31024 + GTX500)

JBL Series III 10" Subwoofer with Selectable 2 Ohm or 4 Ohm Impedance + GTX Series Class-D Monoblock Amplifier with Installation Kit

• 1350W Max 10" Series II Car Audio Subwoofer
• Oversized 2.0" Voice Coil
• JBL Mono Subwoofer Amplifier
• Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

• 1350W Max 10" Series II Car Audio Subwoofer
• Oversized 2.0" Voice Coil
• JBL Mono Subwoofer Amplifier
• Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

JBL Series III 500 Watt RMS 12" Bass Package (S31224 + GTX500)

JBL Series III 12" Subwoofer with Selectable 2 Ohm or 4 Ohm Impedance + GTX Series Class-D Monoblock Amplifier with Installation Kit

S31224_GTX500_BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL Series III 500 Watt RMS 12" Bass Package (S31224 + GTX500)

JBL Series III 12" Subwoofer with Selectable 2 Ohm or 4 Ohm Impedance + GTX Series Class-D Monoblock Amplifier with Installation Kit

• 1500W Max 12" Series II Car Audio Subwoofer
• Oversized 2.0" Voice Coil
• JBL Mono Subwoofer Amplifier
• Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

1

• 1500W Max 12" Series II Car Audio Subwoofer
• Oversized 2.0" Voice Coil
• JBL Mono Subwoofer Amplifier
• Frequency Response: 20 - 200 Hz (±0.5 dB); 10 - 300 Hz (±3dB)
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

EXCLUSIVE

Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure

REF1200S 1000W 12" Shallow Mount Subwoofer + KX200.2 KX Series 2-Ch Amp + XKIT82 2-Ch 8G Amp Install Kit + 12SME 12" Sub Enclosure

REF1200S_KX200.2_XKIT82_12SME big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure

REF1200S 1000W 12" Shallow Mount Subwoofer + KX200.2 KX Series 2-Ch Amp + XKIT82 2-Ch 8G Amp Install Kit + 12SME 12" Sub Enclosure

• Subwoofer: RMS Power: 250W
• Amplifier: 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• 8 Gauge 2-Channel Complete Amplifier Installation Kit
• 12" Single Sealed Ultra Slim Series Subwoofer Enclosure

• Subwoofer: RMS Power: 250W
• Amplifier: 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• 8 Gauge 2-Channel Complete Amplifier Installation Kit
• 12" Single Sealed Ultra Slim Series Subwoofer Enclosure

EXCLUSIVE

JBL Subwoofer + Kicker Amplifier Upgrade Bundle

CS1214 250W 12" CS Series Subwoofer + KX200.2 200W RMS KX Series 2-Channel Amplifier + XKIT82 2-Ch 8 Gauge Amplifier Installation Kit

CS1214_KX200.2_XKIT82 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL Subwoofer + Kicker Amplifier Upgrade Bundle

CS1214 250W 12" CS Series Subwoofer + KX200.2 200W RMS KX Series 2-Channel Amplifier + XKIT82 2-Ch 8 Gauge Amplifier Installation Kit

• Subwoofer: RMS Power: 250W
• Amplifier: 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• 8 Gauge 2-Channel Complete Amplifier Installation Kit

• Subwoofer: RMS Power: 250W
• Amplifier: 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• 8 Gauge 2-Channel Complete Amplifier Installation Kit

EXCLUSIVE

RE Audio XXX12 V2D4 + Kicker Amplifier Bundle

XXX12 V2D4 2000W 12" XXX Series Subwoofer + 2400W KX Series Monoblock Amp + TC6KIT-0B 1/0G OFC Wiring Kit + BBIC5 2-Channel RCA Cable

XXX12 V2D4_KX2400.1_TC6KIT-0B_BBIC5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

RE Audio XXX12 V2D4 + Kicker Amplifier Bundle

XXX12 V2D4 2000W 12" XXX Series Subwoofer + 2400W KX Series Monoblock Amp + TC6KIT-0B 1/0G OFC Wiring Kit + BBIC5 2-Channel RCA Cable

• Subwoofer: RMS Power: 2000W
• FEA-Optimized Motor Structure
• Amplifier: RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

31

• Subwoofer: RMS Power: 2000W
• FEA-Optimized Motor Structure
• Amplifier: RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

Kicker CompVT 10" 4 Ohm (43CVT104) Open Box Complete

800W Peak (400W RMS) 10" CompVT Series Dual 4-Ohm Car Subwoofer

43CVT104 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CompVT 10" 4 Ohm (43CVT104) Open Box Complete

800W Peak (400W RMS) 10" CompVT Series Dual 4-Ohm Car Subwoofer

• 400 Watts RMS
• 800 Watts Max
• UniPlate™ system redirects heat away from motor structure
• Perimeter Venting
• Stamped Steel Basket

• 400 Watts RMS
• 800 Watts Max
• UniPlate™ system redirects heat away from motor structure
• Perimeter Venting
• Stamped Steel Basket

JL Audio M12IB6-SG-TB (Open Box Complete)

12" 4-Ohm M-Series Marine Subwoofer with Titanium Sport Grill

M12IB6-SG-TB-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JL Audio M12IB6-SG-TB (Open Box Complete)

12" 4-Ohm M-Series Marine Subwoofer with Titanium Sport Grill

• 600W RMS
• Injection-Molded mica-filled polypropylene cone bodies
• Synthetic rubber surround specifically formulated with UV inhibitors
• Marine grade progressive roll synthetic fiber spider
• Gold-Plated marine-grade brass connection terminals
• Long linear excursion for enhanced output and reduced distortion

• 600W RMS
• Injection-Molded mica-filled polypropylene cone bodies
• Synthetic rubber surround specifically formulated with UV inhibitors
• Marine grade progressive roll synthetic fiber spider
• Gold-Plated marine-grade brass connection terminals
• Long linear excursion for enhanced output and reduced distortion

EXCLUSIVE

Infinity Subs + Kicker Amp Upgrade Bundle

860W 250W 8" Reference Series Subwoofer + KX400.1 400W RMS KX Series Monoblock Amplifier + XKIT42 2-Chan. 4 Gauge OFC Amp Installation Kit

860W_KX400.1_XKIT42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Subs + Kicker Amp Upgrade Bundle

860W 250W 8" Reference Series Subwoofer + KX400.1 400W RMS KX Series Monoblock Amplifier + XKIT42 2-Chan. 4 Gauge OFC Amp Installation Kit

• Subwoofer: 250W RMS
• Amplifier: RMS: 200W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• CEA-2006 Compliant
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit

196

• Subwoofer: 250W RMS
• Amplifier: RMS: 200W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• CEA-2006 Compliant
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit

EXCLUSIVE

Two 10" NVX Subs + Kicker Amp Upgrade Bundle w/ Sub Box

VCW102 10" Subwoofer + KX1200.1 Monoblock Amplifier + TC6KIT-0B 1/0F OFC Amp Wiring Kit + BBIC5 2-Ch RCA Cable + MDFD10 Dual 10" Sub Box

VCW102_KX1200.1_TC6KIT-0B_BBIC5_MDFD10 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Two 10" NVX Subs + Kicker Amp Upgrade Bundle w/ Sub Box

VCW102 10" Subwoofer + KX1200.1 Monoblock Amplifier + TC6KIT-0B 1/0F OFC Amp Wiring Kit + BBIC5 2-Ch RCA Cable + MDFD10 Dual 10" Sub Box

• Subwoofer: RMS Power: 600-750W
• Amplifier: RMS: 600W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable
• Dual Sealed 10" Enclosure

• Subwoofer: RMS Power: 600-750W
• Amplifier: RMS: 600W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable
• Dual Sealed 10" Enclosure

EXCLUSIVE

Planet Audio Subwoofer + Kicker Amp Upgrade Bundle

TQ12S 750W RMS 12" TQ Series Subwoofer + KX800.1 800W RMS KX Series Monoblock Amplifier + XKIT42 2-Chan. 4 Gauge OFC Amp Installation Kit

TQ12S_KX800.1_XKIT42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Planet Audio Subwoofer + Kicker Amp Upgrade Bundle

TQ12S 750W RMS 12" TQ Series Subwoofer + KX800.1 800W RMS KX Series Monoblock Amplifier + XKIT42 2-Chan. 4 Gauge OFC Amp Installation Kit

• Subwoofer: RMS Power: 750W
• Amplifier: RMS: 400W x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• CEA-2006 Compliant
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit

130

• Subwoofer: RMS Power: 750W
• Amplifier: RMS: 400W x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• CEA-2006 Compliant
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit

EXCLUSIVE

Two Precision Power Subs + Kicker Amp Bundle

Two PH.12 800W 12" Phantom Series Subs + 1600W RMS KX Series Monoblock Amp + TC6KIT-0B 1/0G OFC Amplifier Wiring Kit + BBIC5 2-Ch RCA Cable

PH.12_KX1600.1_TC6KIT-0B_BBIC5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Two Precision Power Subs + Kicker Amp Bundle

Two PH.12 800W 12" Phantom Series Subs + 1600W RMS KX Series Monoblock Amp + TC6KIT-0B 1/0G OFC Amplifier Wiring Kit + BBIC5 2-Ch RCA Cable

• Subwoofer: RMS Power: 800W
• 100% OFC Voice Coil
• Amplifier: RMS: 800W x 1 @ 4 ohm, 1600W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

41

• Subwoofer: RMS Power: 800W
• 100% OFC Voice Coil
• Amplifier: RMS: 800W x 1 @ 4 ohm, 1600W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

JL Audio MX10IB3-SG-CLD-B (Open Box Complete)

10-inch (250 mm) 4 ohm Marine Subwoofer Driver

MX10IB3-SG-CLD-B-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JL Audio MX10IB3-SG-CLD-B (Open Box Complete)

10-inch (250 mm) 4 ohm Marine Subwoofer Driver

• 175W RMS
• Injection-Molded mica-filled polypropylene cone bodies
• Synthetic rubber surround specifically formulated with UV inhibitors
• Marine grade progressive roll synthetic fiber spider
• Gold-Plated marine-grade brass connection terminals
• Long linear excursion for enhanced output and reduced distortion

• 175W RMS
• Injection-Molded mica-filled polypropylene cone bodies
• Synthetic rubber surround specifically formulated with UV inhibitors
• Marine grade progressive roll synthetic fiber spider
• Gold-Plated marine-grade brass connection terminals
• Long linear excursion for enhanced output and reduced distortion

EXCLUSIVE

NVX VCW122 + Kicker Amplifier Bundle

VCW122 1000W 12" VC-Series Subwoofer + KX1600.1 1600W RMS Monoblock Amp + TC6KIT-0B 1/0G OFC Wiring Kit + BBIC5 2-Channel RCA Cable

VCW122_KX1600.1_TC6KIT-0B_BBIC5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

NVX VCW122 + Kicker Amplifier Bundle

VCW122 1000W 12" VC-Series Subwoofer + KX1600.1 1600W RMS Monoblock Amp + TC6KIT-0B 1/0G OFC Wiring Kit + BBIC5 2-Channel RCA Cable

• Power Range (RMS) 850-1000 Watts
• Woven Fiber Pressed Paper Cone
• RMS: 800W x 1 @ 4 ohm, 1600W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

122

• Power Range (RMS) 850-1000 Watts
• Woven Fiber Pressed Paper Cone
• RMS: 800W x 1 @ 4 ohm, 1600W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

EXCLUSIVE

Two 10" NVX Subs + Kicker Amp Upgrade Bundle

Two VCW102 750W 10" VC-Series Subwoofers + KX1200.1 1200W RMS Monoblock Amp + TC6KIT-0B 1/0F OFC Amp Wiring Kit + BBIC5 2-Ch RCA Cable

VCW102_KX1200.1_TC6KIT-0B_BBIC5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Two 10" NVX Subs + Kicker Amp Upgrade Bundle

Two VCW102 750W 10" VC-Series Subwoofers + KX1200.1 1200W RMS Monoblock Amp + TC6KIT-0B 1/0F OFC Amp Wiring Kit + BBIC5 2-Ch RCA Cable

• Subwoofer: RMS Power: 600-750W
• Amplifier: RMS: 600W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

• Subwoofer: RMS Power: 600-750W
• Amplifier: RMS: 600W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

EXCLUSIVE

JBL Subwoofer + Kicker Amp Upgrade Kit

S3-1024 1350W 10" Series III Subwoofer + KX400.1 400W RMS KX Series Monoblock Amplifier + XKIT42 2-Chan. 4G OFC Amp Installation Kit

S3-1024_KX400.1_XKIT42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL Subwoofer + Kicker Amp Upgrade Kit

S3-1024 1350W 10" Series III Subwoofer + KX400.1 400W RMS KX Series Monoblock Amplifier + XKIT42 2-Chan. 4G OFC Amp Installation Kit

• Subwoofer: 450 Watts RMS
• Amplifier: RMS: 200W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• CEA-2006 Compliant
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit

130

• Subwoofer: 450 Watts RMS
• Amplifier: RMS: 200W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• CEA-2006 Compliant
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit

EXCLUSIVE

Two RE Audio Subs and Kicker Amp Package

Two SXXv2-12D2 1200W 12" SXXv2 Series Subs + 2400W RMS KX Series Monoblock Amp + TC6KIT-0B 1/0G OFC Wiring Kit + BBIC5 2-Ch RCA Cable

SXXv2-12D2_KX2400.1_TC6KIT-0B_BBIC5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Two RE Audio Subs and Kicker Amp Package

Two SXXv2-12D2 1200W 12" SXXv2 Series Subs + 2400W RMS KX Series Monoblock Amp + TC6KIT-0B 1/0G OFC Wiring Kit + BBIC5 2-Ch RCA Cable

• Subwoofer: RMS Power: 1200W
• 3" 4-Layer Aluminum Voice Coil
• Amplifier: RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

44

• Subwoofer: RMS Power: 1200W
• 3" 4-Layer Aluminum Voice Coil
• Amplifier: RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• CEA-2006 Compliant
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

EXCLUSIVE

Boss Subwoofer + Kicker Amp Upgrade Bundle w/ Sealed Sub Box

P126DVC 12" Phantom Subwoofer + KX800.1 800W RMS KX Series Monoblock Amp + XKIT42 2-Ch. 4G OFC Amp Install Kit + MDFS12 12" Sealed Sub Box

P126DVC_KX800.1_XKIT42_MDFS12 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Boss Subwoofer + Kicker Amp Upgrade Bundle w/ Sealed Sub Box

P126DVC 12" Phantom Subwoofer + KX800.1 800W RMS KX Series Monoblock Amp + XKIT42 2-Ch. 4G OFC Amp Install Kit + MDFS12 12" Sealed Sub Box

• Subwoofer: 1150 Watts RMS
• Amplifier: RMS: 400W x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• CEA-2006 Compliant
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
• Single Sealed 12" Enclosure

• Subwoofer: 1150 Watts RMS
• Amplifier: RMS: 400W x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• CEA-2006 Compliant
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
• Single Sealed 12" Enclosure

 
    Clear all

    FAQ Frequently asked questions in Discontinued Monoblock Amplifiers

    A monoblock amplifier is a single-channel amplifier designed to power a single speaker or subwoofer. Unlike multi-channel amplifiers that can power multiple speakers simultaneously, a monoblock amplifier is dedicated to driving a specific speaker, typically a subwoofer. The advantage of a monoblock amplifier lies in its specialized design, which allows it to deliver higher power output to the subwoofer without interference from other speakers. This dedicated power delivery results in enhanced bass response and cleaner, more impactful low-frequency reproduction, making monoblock amplifiers a popular choice for car audio enthusiasts seeking powerful bass performance.
    Monoblock amplifiers are specifically designed to power subwoofers and are not intended for use with other speakers in your audio system. They usually have a single output channel optimized for low-frequency signals, making them unsuitable for driving mid-range or high-frequency speakers. For other speakers like door speakers or tweeters, you should use multi-channel amplifiers or dedicated channels on an audio processor. Using a monoblock amplifier for full-range speakers can result in poor audio performance and potential damage to the speakers.
    Monoblock amplifiers are compatible with most subwoofers, but it's crucial to consider the amplifier's power output and the subwoofer's power handling capabilities. The amplifier's power rating should match or slightly exceed the subwoofer's RMS power handling to ensure optimal performance and prevent overloading the subwoofer. Additionally, check the impedance (ohms) of both the amplifier and the subwoofer to ensure they match. Most monoblock amplifiers can handle both 2-ohm and 4-ohm loads, but some can also operate at 1-ohm, providing flexibility in subwoofer wiring configurations.
    No, monoblock amplifiers are not designed for bridging, as they are already single-channel amplifiers dedicated to powering a single subwoofer. Attempting to bridge a monoblock amplifier can cause damage to the amplifier and subwoofers. If you need to power multiple subwoofers, consider using multi-channel amplifiers or multiple monoblock amplifiers, each dedicated to driving a separate subwoofer. Sonic Electronix offers a wide selection of multi-channel amplifiers that can power multiple subwoofers simultaneously, ensuring optimal performance and protection for your audio system.
    Monoblock amplifiers can generate a significant amount of heat, especially when driving powerful subwoofers at high volume levels. While they don't require special cooling or ventilation compared to other amplifier types, it's essential to provide adequate airflow around the amplifier to dissipate heat effectively. Avoid mounting the amplifier in enclosed spaces or areas with limited ventilation, as this can lead to overheating and reduced performance. In some cases, installing a cooling fan or using amplifier cooling solutions can help maintain optimal operating temperatures. If you have concerns about amplifier heat, Sonic Electronix's knowledgeable staff can recommend suitable cooling solutions for your specific setup. Monoblock amplifiers are an excellent choice for enhancing the bass performance in your car audio system, providing dedicated power delivery to your subwoofers for impactful and detailed low-frequency sound reproduction. When used correctly and matched with the right subwoofers, monoblock amplifiers can elevate your car audio experience to new depths of bass excellence.

    All About Discontinued Monoblock Amplifiers

    Car Audio Monoblock Amplifiers

    Bass plays a crucial role in sound by making the music feel alive. And if you’re keen on experiencing the full spectrum of sound including rich and deep bass thumps in your audio system: a monoblock amplifier, and a subwoofer is the answer.

    Designed for maximum efficiency and power output originally for a single speaker, a mono amplifier is popularly used to bring a powerful subwoofer to life while minimizing noise and distortion, enabling the subwoofer to release those deep, resonating bass tones that are sure to induce chest-clutching vibrations. Not only that, but with the right type of monoblock amplifier and configuration of recommended impedance levels to each sub, this amp can give power to two or even multiple subwoofers!

    Owning a monoblock amplifier is the first step in upgrading your standard audio system by introducing more power into the mix and putting the best qualities of audio to the surface for a remarkable listening experience. Here at Sonic Electronix, we have a dedicated selection of tried and tested compact monoblock amplifiers including compact-sized Class-D amplifiers that are now the industry standard when it comes to improving your car audio system. Browse through our monoblock amplifier section and discover industry-leading brands such as Pioneer, JVC, NVX, Belva, Kicker, Rockford Fosgate, Cerwin-Vega, and more.

    Amplifier Resources:

    Wire gauge for Amplifiers

    Amplifier Classes

    Amp Kit Guide

    Our extensive selection of monoblock amplifiers is curated to cater to all your audio needs. Whether you're a seasoned car audio enthusiast or just starting to upgrade your sound system, you'll find only the finest monoblock amplifiers right here.

    Monoblock amplifiers are a powerful and efficient solution for enhancing your car audio experience. Unlike multi-channel amplifiers, monoblocks are designed to drive a single channel, typically a subwoofer, delivering clean and distortion-free bass. Their single-channel configuration enables them to focus all their power on one specific audio range, resulting in a more accurate and controlled bass response. Monoblock amplifiers are perfect for those seeking to create a deep and punchy bass foundation in their car audio system.

    The advantages of owning a monoblock amplifier extend beyond their ability to deliver impactful bass. Due to their specialized design, they are usually more compact and easier to install than multi-channel amplifiers, making them ideal for vehicles with limited space. Moreover, monoblocks offer high power efficiency, ensuring your car's electrical system won't be strained during long listening sessions. When you invest in a top-notch monoblock amplifier, you can expect enhanced audio clarity, improved sound staging, and an overall exhilarating audio experience.

    At Sonic Electronix, we understand that finding the perfect monoblock amplifier can be overwhelming with so many options available. Our website is designed to provide you with all the intuitive information you need to make an informed decision. Each product listing includes detailed specifications and customer reviews, giving you valuable insights into the performance and reliability of our amplifiers.

    When you shop at Sonic Electronix, you can trust that you'll get the best guidance and assistance in finding the perfect monoblock amplifier for your car audio setup. Our dedicated team of car audio experts is always ready to lend a helping hand. If you have any questions or need personalized recommendations, don't hesitate to reach out to our knowledgeable staff. You can call us directly at 1-502-200-8010, and we'll be delighted to provide expert advice on selecting the ideal monoblock amplifier that meets your audio preferences and budget.

    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    1990 Eagle Premier

    2024 Audi Q7

    2005 GMC Envoy XUV

    1987 Buick Skyhawk

    2016 Toyota Tundra

    1991 Ford Explorer

    2004 Saab 9-3

    2005 Honda Pilot

    1971 Saab 99

    2002 Hyundai Sonata

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2024 Q7
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo