Discontinued Class-D Amplifiers

• 2 RE Audio Subs with a Matching Kicker Amp
• RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 15-1/2"L x 2-1/8"H

• 300 W x 1 @ 2 ohm
• High-Gloss Polypropylene Woofer
• Large-Roll Rubber Surround
• 2" Voice Coil
• Vented Pole Pieces
• Progressive Spider
• NexD™ Switching Technology
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• Selectable Low-Pass Filter Slope: 12 dB or 24 dB
• Detented, Calibrated Filter Freq. Potentiometer

Side-firing, super slot port for maximum output • 3/4" MDF ensures rock-solid durability • 12" Thunder Series Subwoofer • 1200 watts max power handling • 600W RMS power handling • Carbon filled polypropylene cone • 2 ohm impedance

• Package Includes 2 x NVX VC Subs and a Matching Kicker Amp
• RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 15-1/2"L x 2-1/8"H

• 600 W x 1 @ 2 ohm
• Pressed Paper Cone With Woven Fiber Top
• Dual 4-ohm Voice Coil
• High Excursion Foam Surround
• NexD™ Switching Technology
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• Selectable Low-Pass Filter Slope: 12 dB or 24 dB
• Detented, Calibrated Filter Freq. Potentiometer

• Prime Series Class D Monoblock Car Amplifier
• RMS: 4 ohm: 300 watts x 1 chan. 2 ohm: 500 watts x 1 chan.
• 12" GT Series Subwoofer (2)
• Peak: 1100 watts, RMS: 275 watts
• 12" Dual Ported Subwoofer Enclosure
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

• Power Range (RMS) 850-1000 Watts
• Woven Fiber Pressed Paper Cone
• Custom High Roll Foam Surround With Nylon Stitching
• Die Cast Aluminum Basket
• Dual Poly-Cotton Spiders
• R.I.P.S. - Regulated, Intelligent Power Supply
• Single Cycle control - High Fidelity Class D
• 1 Pair of Buffered Preamps RCA Outputs
• Dimensions: 10.74"L x 7.85"W x 1.93"H

• RMS Power: 300W x 2 @ 4 ohm, 470W x 2 @ 2 ohm, 930W x 1 @ 4 ohm, Bridged
• Subwoofer RMS Power: 850W
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

• 1200W x 1 @ 2 ohm
• Pressed Paper Cone With Woven Fiber Top
• High Roll Foam Surround
• Die-Cast Aluminum Basket
• Dual 2-ohm Voice Coil
• Dual Poly-Cotton Spiders
• R.I.P.S. (Regulated, Intelligent Power Supply)
• Parametric Bass Boost EQ
• Fully Variable Infrasonic Filter
• Dimensions: 19.70"L x 9.25"W x 2.36"H

• 4 ohm: 500 watts x 1 chan.
• Injection-Molded Polypropylene Cone
• Ribbed Polyurethane Surround
• Large-Diameter Spider
• High-Strength Spiralead Tinsel Leads
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

• 1200W x 1 @ 2 ohm
• Kevlar Fiber Enhanced Non-Pressed Paper Cone
• EROM Foam Surround with Red Stitching
• R.I.P.S. (Regulated, Intelligent Power Supply)
• Parametric Bass Boost EQ
• Fully Variable Infrasonic Filter
• Dimensions: 19.70"L x 9.25"W x 2.36"H

• 800 Watts RMS x 1 @ 2 ohm
• Sensitivity: 87.15 dB
• Mounting depth: 6.65 "
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• Wired remote bass level control included
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Variable Bass Boost: 0 to +12 dB bass boost at 44 Hz
• Dimensions: 6-3/4" W x 12-15/16" L x 1-13/16" H

2 Awesome L7 Sub woofers Plus 1 Competition Level Thunder Elite Series Monoblock Class D Car Amplifier • Amp Power Output, RMS: 1500W / Max: 3000W • Fan-cooled • Overload and thermal protection • Sub Power Handling: RMS: 1500W per pair, Max: 3000W per pair • Titanium deposit impregnated cone woofer with rolled outer edge • Santoprene rubber surround • Highly-efficient UniPlate™ pole-piece/back plate

• 2 ohm: 750 watts x 1 chan.
• Rigid SoloKon cone
• Double Stitched Surround
• Ribbed Santoprene Surround
• Spring-Loaded Terminals
• Spiralead Tinsel Leads
• Wired HFR-3 remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• Frequency Response: 15 - 250 Hz
• Signal to Noise Ration: >95 dB
• Variable low-pass filter: 30 - 250 Hz, 24 dB/octave

• Total Peak Power: 4000W
• Polypropylene Cone
• Butyl Rubber Surround
• Stamped Steel Basket
• Spring Loaded Terminals for easy Connection
• Single Stacked Magnet
• Top-mount depth: 5.32"
• Nickel-plated RCA low level inputs/outputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Wired remote bass level control included
• 11.00" W x 13.95" L x 2.60" H

• 4 ohm: 500 watts x 1 chan.
• Kevlar Reinforced Paper Cone
• High Density NBR Half-Roll Surround
• 2" 4-Layer Voice Coil
• 10 AWG Nickel Plated Compression Input Push Terminals
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

• 1 ohm: 1000 watts x 1 chan.
• Sensitivity: 87.2 dB
• Dual Composite 2-Piece Cone
• Rubatek Foam Surround
• Cast Aluminum Basket
• Double Stacked Magnets
• FEA Optimized Motor Structure
• Wired HFR-3 remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• Frequency Response: 15 - 250 Hz
• Signal to Noise Ration: >95 dB
• Variable low-pass filter: 30 - 250 Hz, 24 dB/octave

• 500 Watts RMS x 1 @ 4 ohm, Bridged
• Sensitivity: 84.87 dB
• Mounting depth: 5.93 "
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF
• Dimensions: 6-3/4" W x 8-1/4" L x 1-13/16" H

• RMS Power: 1040W x 1 @ 4 ohm, 1940W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Subwoofer: 1500W RMS
• 1/0 Gauge Power Amplifier Installation Kit
• 2 Channel RCA Audio Interconnect Cable

• 1200W x 1 @ 2 ohm
• Kevlar Fiber Enhanced Non-Pressed Paper Cone
• EROM Foam Surround with Red Stitching
• R.I.P.S. - Regulated, Intelligent Power Supply
• Single Cycle control - High Fidelity Class D
• 1 Pair of Buffered Preamps RCA Outputs
• Dimensions: 10.74"L x 7.85"W x 1.93"H