Distribution Blocks

• Premium Series Distribution Block
• MAXI Fuses
• 1/0 or 4 AWG Input
• 4 or 8 AWG Outputs
• Nickel Plated • Includes Grommets and Wrenches

HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish

• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base

• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Independently MANL fused outputs
• (1) 1/0 AWG - 8 AWG In
• (3) 4 AWG - 10 AWG Out
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity

• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations

• 3-Position Compact Fused Ground Distribution Block
• One 1/0 - 4 AWG input
• Three 4 - 8 AWG outputs
• Water-resistant solid brass construction
• TPE-wrapped soft touch with dual gasket sizes

• PRO Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant ShocKrome Finish

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• Versatile Power Distribution Block
• Used For Ground Or +12V Connections
• Three 1/0 Or 2 Gauge Connections, Plus Three 4 Or 8 Gauge Connections

• Platinum plated AGU style fused distribution, flexibility of multiple wire size inputs and outputs. Allows for 2 AGU style fuses. Accept 1/0 AWG and 4 AWG inputs. (2) 4 AWG/8 AWG outputs.

• MANL 4 Position Distribution Block
• Small Footprint
• 1) 1/0 AWG Input
• (4) 4/8 AWG outputs

• Water-resistant
• (1) 1/0-4 AWG inputs
• (4) 4/8 AWG outputs
• Gate lock technology

• Dual MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input and Two 4/8 Gauge Output
• Solid Brass Construction For Better Power Transfer
• Water Resistant Housing
• Fuse Type: Dual MANL
• Proprietary Black Coating

• 2-Position All-in-One Distribution Block
• (1) 1/0 AWG Positive input (1) 1/0 AWG Negative input
• 2) 4/8 AWG Positive outputs (2) 4/8 AWG Negative outputs

• Standard 5mm Screw Heads
• Included inserts for Positive and Negative terminal
• Accepts up to 0 gauge ring terminals
• 6 mounting Points
• 100 percent brass
• Easy mount

• Brass Construction
• (2) 1/0-8 Gauge In
• (4) 4-8 Gauge Out
• Uses Strong 5mm Screws

• 3-Position Compact Non-Fused Ground Distribution Block
• One 1/0 - 4 AWG input
• Three 4 - 8 AWG outputs
• Water-resistant solid brass construction
• TPE-wrapped soft touch with dual gasket sizes

• PRO Series Power Distribution T-Block
• Three 8 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Water-resistant
• (1) 1/0-4 AWG inputs
• (2) 4/8 AWG outputs
• Gate lock technology

• Easy-to-use bus/bar distribution block
• 32 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

PRO Series Power or Ground Distribution Block • Two 4/8 Gauge Inputs • Four 8 Gauge Outputs • Multiple Input/Output Design • Protective Cover Included • Corrosion Resistant ShocKrome Finish

• 1/0 AWG Inputs
• 4/8 Gauge Outputs
• Flat Black Finish
• Compact

• Quick disconnect power and ground block
• Accepts 4-gauge power and ground wires
• Machined brass block

• Water-resistant
• (1) 1/0 AWG input
• (2) 1/0 AWG outputs
• Gate lock technology

• Power Distribution Block
• Shoc-Krome Plating

• Comes with fuse jumper to set up for ground, and 2 14-16 spade connectors
• Comes with 28 decals to identify circuits
• Acts as an in-line fuse holder with jumpers to create any distribution block

• MIDI Fuse Block
• 100% Brass Satin Finish

• PRO Series Maxi Fuse Power Distribution Block
• One 4 Gauge Input
• Two 8 Gauge Outputs
• High Power MAXI Fuse Protection
• Deep Wire Recesses
• High Quality ShocKrome Plating
• Snap-Off Cover

• High power MIDI fuse protection
• Corrosion resistant Shoc-Krome finish
•Protective cover included
• 1/0 Gauge or 4 Gauge input

• Stinger Select Series
• 100% Brass Satin Finish
• Large Set Screws

• Power Distribution Block
• 4 Gauge Outputs
• 1/0 Gauge Inputs

• ANL distribution fuse holder with 3 150-amp fuses
• Maximum Input Gauge Size: 1/0 AWG
• Maximum Output Gauge Size: 4 AWG
• Total Number of Inputs: 1
• Total Number of Outputs: 3
• Nickel Plated Material

• (2) 4 AWG - 10 AWG OUT
• (1) 1/0 AWG - 8 AWG IN
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity

• GT2 Ground Termination Block, (2) 1/0-8AWG in
• Dual inputs allow for a single ground point for multiple amplifiers

• 2X 1/0-4 gauge input and 4X 1/0-4 gauge output distribution block
• Maximum Input Gauge Size: 1/0 AWG
• Maximum Output Gauge Size: 1/0 AWG
• Total Number of Inputs: 2
• Total Number of Outputs: 4
• Compatible with power and ground
• Nickel Plated Material

• 2-Input 4-Output Power and Ground Distribution Block
• Four 1/0-gauge inputs and 1/0 outputs
• Four 4-gauge outputs
• 4 independent MANL fused positive circuits

• 2-input and 4-output distribution block
• 1/0-gauge to 4-gauge inputs
• 4-gauge to 8-gauge outputs
• Nickel-plated contacts and conductors

• 4-way Fused AFS Distribution Block
• 4 input and 4 output connection points
• 5/16" stud connectors to accept most ring terminals
• Nickel-plated brass connection posts

• Stinger Select Series
• 100% Brass Satin Finish
• Large Set Screws
• Corrosion Resistant

• Machined Distribution Block
• 14 total 1/0-gauge inputs and outputs
• Designed for systems with multiple batteries and amplifiers

• Distribution block
• Satin/Brass Construction
• Snap on Hardcover
• 4 Gauge In, 8 Gauge Output

• 2-way Fused AFS Distribution Block
• 2 input and 2 output connection points
• 5/16" stud connectors to accept most ring terminals
• Nickel-plated brass connection posts

• Fuse Distribution Block
• Maximum Input Gauge Size: 1/0 AWG with 4 AWG reducer
• Maximum Ouput Gauge Size: 4 AWG with 8 AWG reducer
• Total Number of Inputs: 1
• Total Number of Outputs: 2
• Chrome Plated Brass Material
• Heavy duty set screws holds cables securely

• Distribution Block
• 1 Input to 4 Output
• Satin Finish

• 2-Position AGU Fuse Distribution Block
• Maximum Input Gauge Size: 1/0 AWG with 4 AWG reducer
• Maximum Ouput Gauge Size: 4 AWG with 8 AWG reducer
• Total Number of Inputs: 1
• Total Number of Outputs: 2
• Chrome Plated Brass Material
• Snap on protective see-through cover

• Fuse Distribution Block
• Maximum Input Gauge Size: 4 AWG
• Maximum Ouput Gauge Size: 8 AWG
• Total Number of Inputs: 1
• Total Number of Outputs: 4
• Chrome Plated Brass Material

• Easy-to-use bus/bar 25" distribution block and fuse holder
• 32 ring terminal connections
• Holds 16 ANL fuses
• Use when installing multiple amps and batteries
• Accepts any ring terminal with a 5/16" hole

• One 1/0 Gauge Input
• Two 4 Gauge or 8 Gauge Output
• Satin Chrome Plated Terminals
• All Brass Hardware

• (2) 1/0 ga inputs for power
• (4) 4/8 ga MANL fused power outputs
• >Small Footprint with compact brass design
• All in one compact block

• Easy-to-use bus/bar distribution block
• 12 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• High Power MAXI Fuse Protection
• Corrosion Resistant Shoc-Krome Finish
• Compact Space Saving Design
• Dual Fuse Output Design

• Easy-to-use bus/bar distribution block
• 14 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• Positive Or Negative Use
• One 1/0 - 4 Gauge Input
• Four 4 - 8 Gauge Outputs
• All Brass Hardware
• Satin-Chrome Plated
• Solid Termination
• No-Fail Components
• Extreme Current Flow