Car Amplifier Installation & Accessories

• 1 inch diameter
• 50 percent heat shrink tubing
• Length: 4 feet

• Water-Resistant Master MAXI Fuse Block
• 4 AWG to 8 AWG Power Wire
• Used In Under-Hood Applications For Amp Installation

• 9 Ft. 2-Channel Premium Audio RCA Interconnect Cable
• Pure OFC copper conductors and polyethylene dielectrics
• Twisted-pair wire construction to reject noise
• Braided black outer jacket for protection
• Cable Length: 9 feet / 2.7 meter

• 1/0 AWG Inputs
• 4/8 Gauge Outputs
• Flat Black Finish
• Compact

• Pure silver conductors for full midrange & crystal clear highs
• 5-layer signal protection to keep music in and noise out
• Rhodium plated machined copper RCA ends
• Ultra OFC long grain copper conductors

• Full-range output equalized output with volume control from stock stereo
• Plug and Play installation
• Interface provides 6-channel output to connect aftermarket amplifiers to an existing stock stereo system
• Full balance and fader control from the factory radio
• Dual LED for troubshooting and programming
• Provides amplifier turn on output for external amplifiers
• Can be used in 2-channel / 4-channel / 6-channel modes

• Flexible white protective jacket
• Twisted-Pair Construction to Reject Noise
• Pure OFC Copper Conductors with Polyethylene Dielectrics
• Molded Connector Bodies
• Machined Brass Connector Elements

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• 6 ft (1.83m) Marine Audio 2-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts

• Amplifier bypass harness for select 1990-2004 vehicles from Ford, Mercury, Lincoln
• Includes 5 ft. / 60" harness with 8-pin plug
• Also includes 17 ft. 16-gauge harness with 20-pin plug
• Color coded wires with printed labels for easy installation

• 8-Channel Speaker Level Inputs
• 8-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• DSP installation harness for select 2015-2025 vehicles from Volkswagen
• Compatible for vehicles without factory amplifiers
• Simplifies installation of DSP and amplifiers
• Can be used with a Maestro DSR1 or AR and a compatible amplifier/DSP

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• Clear Coating to Prevent Rust and Weather Damage
• Designed for AGU Fuses
• Fuse Not Included

• Amplifier replacement harness for select 2008-2025 vehicles from Toyota, Lexus
• Maestro AR module required
• Includes harnesses needed to install Maestro AR module
• Plug-n-play, easy installation

• Square ANL fuse holder with 200A fuse
• Connects to 1/0 - 4-gauge power wire
• Maximum Input Gauge Size: 1/0 AWG
• Maximum Ouput Gauge Size: 1/0 AWG
• Total Number of Inputs: 1
• Total Number of Outputs: 1
• Nickel Plated Material

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

• 8 gauge Power Cable
• OFC (100% Oxygen-Free Copper) material
• Full-spec hyper-flex cable design
• Plated in anti-corrosive 99.9% tin
• Length: 20 feet (6 meter)

• Amplifier replacement harness for select 2010-2025 vehicles from Hyundai, Kia
• Works with DSP with dedicated SPDIF input
• Includes harnesses needed to install Maestro AR module
• Plug-n-play, easy installation

• Quick disconnect power and ground block
• Accepts 4-gauge power and ground wires
• Machined brass block