Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Alpine Store
  3. Discontinued Alpine Car Audio & Electronics
  4. Discontinued Alpine Car Amplifiers
  5. Discontinued Alpine 5-Channel, 6-Channel & 8-Channel Amplifiers

Discontinued Alpine 5-Channel, 6-Channel & 8-Channel Amplifiers

Alpine offers multi-channel amps for complex, high-quality audio setups.

Match Amps to Subs
Filters
Alpine ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Find compatible amplifiers for subs you own or want with our powerful AmpliFinder® tool.

Match Amps to Subs

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Alpine MRV-V500

500W Max (490W RMS) V-Power Series 4 ohm Stable 5-Channel Class-D Amplifier w/ Remote Level Control

MRV-V500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-V500

500W Max (490W RMS) V-Power Series 4 ohm Stable 5-Channel Class-D Amplifier w/ Remote Level Control

• RMS: 40W x 4 + 150W x 1 @ 4 ohm, 60W x 4 + 250W x 1 @ 2 ohm
• Total RMS Power: 490 watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs
• 3-way protection circuitry

3

• RMS: 40W x 4 + 150W x 1 @ 4 ohm, 60W x 4 + 250W x 1 @ 2 ohm
• Total RMS Power: 490 watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs
• 3-way protection circuitry

Alpine MRX-V60

600W RMS, 5-Channel Class D X-Power Series Car Amplifier

MRX-V60 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRX-V60

600W RMS, 5-Channel Class D X-Power Series Car Amplifier

MRX Series 5-Channel Car Amplifier • 50W RMS @ 4 Ohm x 4 Chan. + 200 Watts x 1 Chan. • 75W RMS @ 2 Ohm x 4 Chan. + 300 watts x 1 chan. • 150W RMS @ 4 Ohm Bridged x 2 Channels • Variable Low-Pass Crossover • Variable High-Pass Crossover • Variable Bass Boost

4

MRX Series 5-Channel Car Amplifier • 50W RMS @ 4 Ohm x 4 Chan. + 200 Watts x 1 Chan. • 75W RMS @ 2 Ohm x 4 Chan. + 300 watts x 1 chan. • 150W RMS @ 4 Ohm Bridged x 2 Channels • Variable Low-Pass Crossover • Variable High-Pass Crossover • Variable Bass Boost

Alpine X-A90V

900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier

X-A90V big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine X-A90V

900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier

• 600 Watts RMS x 5 @ 4 ohm (75W x 4, 300W x 1)
• 900 Watts RMS x 5 @ 2 ohm (100W x 4, 500W x 1)
• 900 Watts RMS x 5 @ 4 ohm, Bridged (200W x 2, 500W x 1)
• CEA-2006 Compliant
• Low Pass, High Pass and Subsonic Filters
• 0 - 12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 11-3/4" W x 7-5/8" L x 2" H

VIP Star Icon

VIP Product Get $90.00 in rewards to spend later

1

• 600 Watts RMS x 5 @ 4 ohm (75W x 4, 300W x 1)
• 900 Watts RMS x 5 @ 2 ohm (100W x 4, 500W x 1)
• 900 Watts RMS x 5 @ 4 ohm, Bridged (200W x 2, 500W x 1)
• CEA-2006 Compliant
• Low Pass, High Pass and Subsonic Filters
• 0 - 12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 11-3/4" W x 7-5/8" L x 2" H

Alpine PDR-V75

750W PDR Series 5-Channel Class D Car Amplifier

PDR-V75 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDR-V75

750W PDR Series 5-Channel Class D Car Amplifier

• RMS Power: 75W x 4 + 250W x 1 @ 4 ohm, 100W x 4 + 350W x 1 @ 2 ohm, 200W x 2 + 350W x 1 @ 4 ohm Bridged
• MOSFET Power and Output Stages
• CEA-2006 Compliant/Preamp Outputs/LPF
• Dimensions: 10-5/8"W x 6-9/16"L x 2"H

1

• RMS Power: 75W x 4 + 250W x 1 @ 4 ohm, 100W x 4 + 350W x 1 @ 2 ohm, 200W x 2 + 350W x 1 @ 4 ohm Bridged
• MOSFET Power and Output Stages
• CEA-2006 Compliant/Preamp Outputs/LPF
• Dimensions: 10-5/8"W x 6-9/16"L x 2"H

Alpine MRV-F450

MRV-F450 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-F450

50W x 4 + 200W x1 Car Amp • 60 watts RMS x 4 at 2 ohm + 200 watts RMS x 1 at 4 ohm • BassEngine® with variable high-pass/low-pass crossovers, subsonic filter on the sub channel, and a tuned Bass EQ

3

50W x 4 + 200W x1 Car Amp • 60 watts RMS x 4 at 2 ohm + 200 watts RMS x 1 at 4 ohm • BassEngine® with variable high-pass/low-pass crossovers, subsonic filter on the sub channel, and a tuned Bass EQ

Alpine PDX-V9

1600W Max, 5-Channel PDX Series Car Amplifier

PDX-V9 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-V9

1600W Max, 5-Channel PDX Series Car Amplifier

• Full-Range RMS: 100W x 4 @ 4 ohm, 100W x 4 @ 2 ohm
• Subwoofer RMS: 500W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• CEA-2006 Compliant
• Super Efficient PDX Power Supply >90%
• Power Management Processor
• Dimensions: 10-5/8"W x 7-1/2"D x 2"H

VIP Star Icon

VIP Product Get $100.00 in rewards to spend later

10

• Full-Range RMS: 100W x 4 @ 4 ohm, 100W x 4 @ 2 ohm
• Subwoofer RMS: 500W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• CEA-2006 Compliant
• Super Efficient PDX Power Supply >90%
• Power Management Processor
• Dimensions: 10-5/8"W x 7-1/2"D x 2"H

Alpine MRA-F350

5-Channel Surround Sound Theatre Amplifier

MRA-F350 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRA-F350

5-Channel Surround Sound Theatre Amplifier

50W x 5 Channel Surround Sound Theatre Amplifier • THD: 0.08% • Signal to Noise: 80 dB • Crossover Frequency Adjustment : 20 - 200Hz • Parametric Equalizer

50W x 5 Channel Surround Sound Theatre Amplifier • THD: 0.08% • Signal to Noise: 80 dB • Crossover Frequency Adjustment : 20 - 200Hz • Parametric Equalizer

Alpine PDXV9 (Open Box, Complete)

1600W Max, 5-Channel PDX Series Car Amplifier

pdxv9 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDXV9 (Open Box, Complete)

1600W Max, 5-Channel PDX Series Car Amplifier

• Full-Range RMS: 100W x 4 @ 4 ohm, 100W x 4 @ 2 ohm
• Subwoofer RMS: 500W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• CEA-2006 Compliant
• Super Efficient PDX Power Supply >90%
• Power Management Processor
• Dimensions: 10-5/8"W x 7-1/2"D x 2"H

10

• Full-Range RMS: 100W x 4 @ 4 ohm, 100W x 4 @ 2 ohm
• Subwoofer RMS: 500W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• CEA-2006 Compliant
• Super Efficient PDX Power Supply >90%
• Power Management Processor
• Dimensions: 10-5/8"W x 7-1/2"D x 2"H

Alpine MRX-V70

1200W Max, 5-Channel X-Power Series Car Amplifier

MRX-V70 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRX-V70

1200W Max, 5-Channel X-Power Series Car Amplifier

• Full-Range RMS: 60W x 4 @ 4 ohm, 90W x 4 @ 2 ohm
• Subwoofer RMS: 250W x 1 @ 4 ohm, 350W x 1 @ 2 ohm
• Ultra-Wide Frequency Bandwith
• Distortion-Free Low-Power Signal Input
• Class D Circuitry
• Dimensions: 10-5/8"W x 9-1/16"D x 2-5/16"H

1

• Full-Range RMS: 60W x 4 @ 4 ohm, 90W x 4 @ 2 ohm
• Subwoofer RMS: 250W x 1 @ 4 ohm, 350W x 1 @ 2 ohm
• Ultra-Wide Frequency Bandwith
• Distortion-Free Low-Power Signal Input
• Class D Circuitry
• Dimensions: 10-5/8"W x 9-1/16"D x 2-5/16"H

Alpine PDX-5 Open Box

(Open Box) 600W RMS, Class D 5-Channel PDX Series Amplifier

PDX-5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-5 Open Box

(Open Box) 600W RMS, Class D 5-Channel PDX Series Amplifier

PDX Series 5-Channel Class D Car Amplifier • 75W x 4 chan. + 300W x 1 chan. @ 4 ohm • 75W x 4 chan. + 300W x 1 chan. @ 2 ohm • 150W x 2 chan. + 300W x 1 chan. @ 4 ohm • Stackable operation allows for multi-amplifier setup

PDX Series 5-Channel Class D Car Amplifier • 75W x 4 chan. + 300W x 1 chan. @ 4 ohm • 75W x 4 chan. + 300W x 1 chan. @ 2 ohm • 150W x 2 chan. + 300W x 1 chan. @ 4 ohm • Stackable operation allows for multi-amplifier setup

Alpine PDX-5

600W RMS, Class D 5-Channel PDX Series Amplifier

PDX-5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-5

600W RMS, Class D 5-Channel PDX Series Amplifier

PDX Series 5-Channel Class D Car Amplifier • 75W x 4 chan. + 300W x 1 chan. @ 4 ohm • 75W x 4 chan. + 300W x 1 chan. @ 2 ohm • 150W x 2 chan. + 300W x 1 chan. @ 4 ohm • Stackable operation allows for multi-amplifier setup

11

PDX Series 5-Channel Class D Car Amplifier • 75W x 4 chan. + 300W x 1 chan. @ 4 ohm • 75W x 4 chan. + 300W x 1 chan. @ 2 ohm • 150W x 2 chan. + 300W x 1 chan. @ 4 ohm • Stackable operation allows for multi-amplifier setup

Alpine PDR-V75 (Open Box Complete Damaged Packaging Only)

750W PDR Series 5-Channel Class D Car Amplifier

PDR-V75 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDR-V75 (Open Box Complete Damaged Packaging Only)

750W PDR Series 5-Channel Class D Car Amplifier

• RMS Power: 75W x 4 + 250W x 1 @ 4 ohm, 100W x 4 + 350W x 1 @ 2 ohm, 200W x 2 + 350W x 1 @ 4 ohm Bridged
• MOSFET Power and Output Stages
• CEA-2006 Compliant/Preamp Outputs/LPF
• Dimensions: 10-5/8"W x 6-9/16"L x 2"H

1

• RMS Power: 75W x 4 + 250W x 1 @ 4 ohm, 100W x 4 + 350W x 1 @ 2 ohm, 200W x 2 + 350W x 1 @ 4 ohm Bridged
• MOSFET Power and Output Stages
• CEA-2006 Compliant/Preamp Outputs/LPF
• Dimensions: 10-5/8"W x 6-9/16"L x 2"H

Alpine MRX-V60 Open Box

600W RMS, 5-Channel Class D X-Power Series Car Amplifier

MRX-V60 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRX-V60 Open Box

600W RMS, 5-Channel Class D X-Power Series Car Amplifier

MRX Series 5-Channel Car Amplifier • 50W RMS @ 4 Ohm x 4 Chan. + 200 Watts x 1 Chan. • 75W RMS @ 2 Ohm x 4 Chan. + 300 watts x 1 chan. • 150W RMS @ 4 Ohm Bridged x 2 Channels • Variable Low-Pass Crossover • Variable High-Pass Crossover • Variable Bass Boost

MRX Series 5-Channel Car Amplifier • 50W RMS @ 4 Ohm x 4 Chan. + 200 Watts x 1 Chan. • 75W RMS @ 2 Ohm x 4 Chan. + 300 watts x 1 chan. • 150W RMS @ 4 Ohm Bridged x 2 Channels • Variable Low-Pass Crossover • Variable High-Pass Crossover • Variable Bass Boost

Alpine R-A90S (Open Box, Great)

900W RMS Class D R Series 6 Channel Car Amplifier

R-A90S big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine R-A90S (Open Box, Great)

900W RMS Class D R Series 6 Channel Car Amplifier

• 75 watts x 4 channel + 150 watts x 2 channel @ 4 ohm
• 100 watts x 4 channel + 250 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• 75 watts x 4 channel + 150 watts x 2 channel @ 4 ohm
• 100 watts x 4 channel + 250 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 6-Channel Amplifier

Alpine PDX-V9 Open Box Missing (Good, Used)

1600W Max, 5-Channel PDX Series Car Amplifier Open Box Missing (Good, Used)

PDX-V9 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-V9 Open Box Missing (Good, Used)

1600W Max, 5-Channel PDX Series Car Amplifier Open Box Missing (Good, Used)

• Full-Range RMS: 100W x 4 @ 4 ohm, 100W x 4 @ 2 ohm
• Subwoofer RMS: 500W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• CEA-2006 Compliant
• Super Efficient PDX Power Supply >90%
• Power Management Processor
• Dimensions: 10-5/8"W x 7-1/2"D x 2"H

• Full-Range RMS: 100W x 4 @ 4 ohm, 100W x 4 @ 2 ohm
• Subwoofer RMS: 500W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• CEA-2006 Compliant
• Super Efficient PDX Power Supply >90%
• Power Management Processor
• Dimensions: 10-5/8"W x 7-1/2"D x 2"H

Alpine PDX-5 R/B

600W RMS, Class D 5-Channel PDX Series Amplifier

PDX-5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine PDX-5 R/B

600W RMS, Class D 5-Channel PDX Series Amplifier

PDX Series 5-Channel Class D Car Amplifier • 75W x 4 chan. + 300W x 1 chan. @ 4 ohm • 75W x 4 chan. + 300W x 1 chan. @ 2 ohm • 150W x 2 chan. + 300W x 1 chan. @ 4 ohm • Stackable operation allows for multi-amplifier setup

PDX Series 5-Channel Class D Car Amplifier • 75W x 4 chan. + 300W x 1 chan. @ 4 ohm • 75W x 4 chan. + 300W x 1 chan. @ 2 ohm • 150W x 2 chan. + 300W x 1 chan. @ 4 ohm • Stackable operation allows for multi-amplifier setup

Alpine S-A55V

S-Series 5-Channel Class D Amplifier (540W RMS)

S-A55V big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine S-A55V

S-Series 5-Channel Class D Amplifier (540W RMS)

• 5-channel Class D Amplifier
• 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohm
• 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohm
• 120 watts RMS x 2 bridged at 4 ohm + 300 watts RMS x 1 at 2 ohm
• CTA-2006 compliant
• High pass and Low pass filters with Bass Boost

2

• 5-channel Class D Amplifier
• 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohm
• 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohm
• 120 watts RMS x 2 bridged at 4 ohm + 300 watts RMS x 1 at 2 ohm
• CTA-2006 compliant
• High pass and Low pass filters with Bass Boost

Alpine R-A90S (Open Box, Good)

900W RMS Class D R Series 6 Channel Car Amplifier

R-A90S big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine R-A90S (Open Box, Good)

900W RMS Class D R Series 6 Channel Car Amplifier

• 75 watts x 4 channel + 150 watts x 2 channel @ 4 ohm
• 100 watts x 4 channel + 250 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• 75 watts x 4 channel + 150 watts x 2 channel @ 4 ohm
• 100 watts x 4 channel + 250 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 6-Channel Amplifier

Alpine MRV-V500 (Open Box)

490W 5-Channel V-Power Series Class D Amplifier

MRV-V500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-V500 (Open Box)

490W 5-Channel V-Power Series Class D Amplifier

• Item Condition: Open Box
• RMS: 40W x 4 + 150W x 1 @ 4 ohm, 60W x 4 + 250W x 1 @ 2 ohm
• Total RMS Power: 490 watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs
• 3-way protection circuitry

• Item Condition: Open Box
• RMS: 40W x 4 + 150W x 1 @ 4 ohm, 60W x 4 + 250W x 1 @ 2 ohm
• Total RMS Power: 490 watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs
• 3-way protection circuitry

Alpine MRV-V500 Open Box Missing (Good, Used)

490W 5-Channel V-Power Series Class D Amplifier Open Box Missing (Good, Used)

MRV-V500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine MRV-V500 Open Box Missing (Good, Used)

490W 5-Channel V-Power Series Class D Amplifier Open Box Missing (Good, Used)

• RMS: 40W x 4 + 150W x 1 @ 4 ohm, 60W x 4 + 250W x 1 @ 2 ohm
• Total RMS Power: 490 watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs
• 3-way protection circuitry

• RMS: 40W x 4 + 150W x 1 @ 4 ohm, 60W x 4 + 250W x 1 @ 2 ohm
• Total RMS Power: 490 watts
• CEA-2006 Compliant
• Speaker-level (high-level) inputs
• 3-way protection circuitry

1 2 Next

Items per page: 20 40 60

    Clear all

    Alpine 5-Channel, 6-Channel & 8-Channel Amplifiers Information

    A 5-channel car amplifier from Alpine will provide your vehicle with the power it requires. These amps can operate five or more channels and Alpine is a leader in amplification solutions. Power your speakers with a Alpine 5-channel amplifier for a great all around sound.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2022 Jeep Compass

    1978 Dodge Ramcharger

    2004 Mazda B3000

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2022 Compass
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo