Open Box, Great - JL Audio XD500/3v2 | XDv2 Series 3-Channel Amplifier

by JL Audio

About
Specs & Details
Reviews
Add-ons
Recently Viewed
Related Searches

JL Audio XD5003V2 (Open Box, Complete) Image 1 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 2 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 3 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 4 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 5 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 6 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 7 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 8 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 9 — JL Audio XD5003V2 (Open Box, Complete)

JL Audio XD5003V2 (Open Box, Complete) Image 10 — JL Audio XD5003V2 (Open Box, Complete)

Product highlights

• RMS: 75 W x 2 + 180 W x 1 @ 4 ohm, 100 W x 2 + 300 W x 1 @ 2 ohm, 200 W x 1 @ 4 ohm Bridged
• NexD Switching Technology
• Differential Balanced Input Section
• Advanced Rollback Protection
• Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
• Detented, Calibrated Filter Freq. Potentiometer

Learn more about the LS-xd5003v2-OB

Description

Authorized dealer

Item Condition - Open Box, Great:

This product works like new, is well-cared-for and in great condition. May show limited signs of wear or use and may be missing non-essential parts, accessories or original packaging.

Item Condition - Like New:
A Open Box, Like New product is an apparently untouched product in perfect condition that includes all accessories and packaging. Original protective wrapping may be missing, but the original packaging is intact and pristine. There are absolutely no signs of wear on the item or installation. Instructions are included. Warranty details are included in the item description or comments. Item is suitable for presenting as a gift and savings should be abundant!

JL Audio XD500/3v2 - XDv2 Series 3-Channel Class D System Amplifier

This flexible 3-Channel amplifier employs JL Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output in an ultra-compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious power, delivering a full 500W of continuous total power into a 2 ohm load (14.4V, 1% THD). Targeted specifically for an audiophile-grade subwoofer + two satellite system, the XD500/3v2 includes a variable mode high-pass filter and variable slope low-pass filter, both with a continuously variable cutoff frequency selection from 50-500 Hz. The XD500/3v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you can control the volume of the subwoofer channel (Subwoofer Level) or of the entire XD500/3v2 from the front of the vehicle (Master Volume). This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

Advanced Rollback Protection

JL Audio's signature Advanced Thermal Rollback protection system eliminates annoying thermal shutdown events to keep the music playing, even under the most demanding conditions. Should the amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases.

NexD Switching Technology

From the same minds that gave us the technology found in the 'Slash' amplifiers, JL Audio has taken the simple fixed PWM design approach and enhanced it with a very high switching frequency. Full-range NexD amplifiers and channels feature a variable, ultra-high speed version of the NexD technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with "feed-forward" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.

General Features:

Item Condition: Like New, Open Box, Complete
Not Refurbished

XDv2 Series Class D 3-Channel Amplifier
RMS Power Rating @14.4V: Channel 1 - 2

4 ohm: 75 watts x 2 chan.
2 ohm: 100 watts x 2 chan.
Bridged 4 ohm: 200 watts x 1 chan.

RMS Power Rating @14.4V: Sub Channel

4 ohm: 180 watts x 1 chan.
3 ohm: 240 watts x 1 chan.
2 ohm: 300 watts x 1 chan.

RMS Power Rating @12.5V: Channel 1 - 2

4 ohm: 60 watts x 2 chan.
2 ohm: 90 watts x 2 chan.
Bridged 4 ohm: 180 watts x 1 chan.

RMS Power Rating @12.5V: Sub Channel

4 ohm: 180 watts x 1 chan.
3 ohm: 240 watts x 1 chan.
2 ohm: 300 watts x 1 chan.

NexD High Speed Switching Class D Technology
Wired HD-RLC remote level control available, sold separately
LED power (green), over-current (yellow) and protect (red) indicators
Advanced Rollback Protection
Differential Balanced RCA Input
Pass-through preamp RCA outputs
Selectable turn-on modes: REM / Offset / Signal

+12 V Remote Turn-On: Traditional remote lead wire, from headunit
DC Offset-Sensing: On/Off by detecting a very small DC signal (high-level signal only)
Signal-Sensing: On/Off by detecting a full-range audio signal at left-channel input (high-level signal only)

Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
Heavy duty aluminum alloy heat-sink for extreme heat dissipation
3-way protection circuitry (thermal, overload, and speaker short protection)
Detented, Calibrated Filter Freq. Potentiometer
Selectable input mode: 2 Ch. / 4 Ch.
Ch 1&2: 12dB/octave Butterworth High-Pass
Sub Ch: 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley
Input sensitivity:

Low level: 800mV - 8V
High level: 200mV - 2V

Frequency Response (Main): 12 - 22,000 Hz
Frequency Response (SubW): 10 - 1,000 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: >104 dB
Damping Factor @4 ohm: >120 / 50 Hz
Selectable Filter Mode (Main): Off / HP
Variable cutoff filter: 50 - 500 Hz
Fuse Rating: 50A x 1 inline (not supplied)
4 gauge OFC power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Weight: 4.20 lb
Dimensions: 7.09"W x 10.23"L x 2.05"H
Authorized Internet Dealer
2 Year Manufacturer's Warranty

Check out the JL Audio XD500/3v2 Owner's Manual

Product history:

	JL Audio XD5003V2 (Open Box, Complete) (newest, current model)
	JL Audio XD500/3 (previous model, replaced by JL Audio XD5003V2 (Open Box, Complete))

This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.

Specifications & Details

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

75 watts x 2 channel

RMS Power @ 2 ohms

100 watts x 2 channel

Bridged RMS Power

200 watts x 1 channel

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms

180 watts x 1 channel

RMS Power @ 2 ohms

300 watts x 1 channel

Amplifier Specifications

Series

XD-v2 Series

Amplifier Class

Number of Channels

3-Channel

Total RMS Power Output

500 watts

Maximum Input Gauge Size

4 AWG

Minimum Impedance Unbridged

2 ohm

Minimum Impedance Bridged

4 ohms

THD at Rated RMS Power

<1.0%

Speaker Level Inputs

Yes

Preamp Outputs

1 pair

Built-in Crossover

Low-Pass (LP)
High-Pass (HP)
Full (AP)

High-Pass Crossover Frequency

50 - 500 Hz

Low-Pass Crossover Frequency

50 - 500 Hz

Signal-to-Noise Ratio

104 dB

Bass Boost

0 - 12 dB

Remote bass/level controller

Optional (Accessory required and sold separately)

JL Audio HD-RLC

Fuse Rating

50A x 1

Total Fuse Rating

Strappable

Sonic Certified Amplifier

Not Tested

Amp Bluetooth Connectivity

Hi-Res Certified

What is in the box?

Paperwork

User manual

WITB: Amplifiers

Amplifier
Adhesive brand badge
Allen wrench

Warranty and Return Policy

Parts Warranty Duration

2 years

Labor Warranty Duration

2 years

Warranty Provider

Manufacturer

Customer Ratings & Reviews

JL Audio XD5003V2 (Open Box, Complete) thumbnail image

Overall rating distribution

5 star		0%
4 star		0%
3 star		0%
2 star		0%
1 star		0%

Filter by Star Rating

Show only Verified Purchases

By feature average rating

Durability		0
Value		0
Features		0
Design		0
Usability		0

Customer Reviews

Sort by:

Sorry, no reviews found

Add-ons

Kicker PK4 (46PK4)

4 Gauge OFC Power Amplifier Installation Kit

$99.99

List price $179.99

Subscribe

Welcome to the Team!

JL Audio XD5003V2 (Open Box, Complete)

We apologize

This item has been discontinued

Description

JL Audio XD500/3v2 - XDv2 Series 3-Channel Class D System Amplifier

Advanced Rollback Protection

NexD Switching Technology

General Features:

Product history:

Specifications & Details

Item Details

Customer Ratings & Reviews

Customer Reviews

Related Searches

Are you sure you want to clear your garage?

This page was not designed for products.

Didn't find your car?

Account

Shopping help

Company

Everyday heroes

Brand stores

Useful links