See all parts that fit your 1978 Nova
600 Watt Peak (300W RMS) CX Series 4-Channel Bridgeable Class D Car Amplifier Package
• 75 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 12-7/16"L x 2-3/8"H
The CX Series spans all kinds of systems, whether you're just trying to get a little more out of your factory radio or you're ready to blow the doors off with a completely aftermarket setup. Either way, the quality of your sound is at the heart of the CX Series. Sleek, simple styling and installation flexibility all round out the amplifiers' functionality.
Kicker makes your installation simple, but gives you plenty of options. Make it easy on yourself when plugging in with Kicker's KISL so you can take high-level signal from the headunit's speaker outputs straight into the amp's RCA input. Also, most models are just more than two inches thick and included brackets allow you to install these vertically. If space is at a premium in your ride, the CX series gives off plenty of power while saving you some room.
The CXA300.4 will make sure your cabin speakers have all the power they need. This Class-D 2-ohm stable 4-channel amp is built to handle 75 watts at 2 ohms for 4 channels, 40 watts at 4 ohms on 4 channcels, or 150 watts at 4 ohms for 2 channels when bridged, and the subwoofer channel can pump out 300 watts at 2 ohms.
With a total power output at 600 watts, 3-way protection circuitry and a pulse width modulated power supply, the CXA300.4 will power your speakers for the long haul.
The CX Series has a lot of built-in technology to make sure your system just keeps going for the long haul. With litz-wound transformers to maximize power transfer while minimizing power loss, high current switching, buffered RCA outputs, these amps are built to put out lasting, quality power.
These amps also include their own crossovers and an adjustable KickEQ Bass Boost. A 3-second turn-on delay helps eliminate any additional interference that might affect your system.
But these amps also have Kicker's Failsafe Integration Technology inside. That means they can take signal from any audio source and run it straight into the amp. For you, it means no need for line-out converters, step down modules, processors or less conventional wiring to complete your system. Kicker's FIT eliminated the need for additional equipment that could introduce additional noise to your signal. It even works well with factory amplified systems from other premium brands.
For a potent, versatile power solution for your sound system, pick up as many CX Series amps as you need here at Sonic Electronix. Add one, or however many you need, to your cart today.
Best selling similar products
Manufacturer:
Model Number:
46CXARC,46CXA3604T
Weight:
7.40lbs
Internal SKU:
43cxa3004_43cxarc
Internal Product ID:
160907
Decent for a basic system
I have owned this amp for about a year now. This is a good entry-level amp for a basic system. I used it to power 6 Kicker 6" coaxials and 2 RF tweeters. System honestly didn't sound too bad, for being a budget system.
I have since upgraded to a JL Slash V3 300.4 amp and what a world of difference. Way cleaner sound, richer, much more power. But for $200, this really isn't a bad amp. I would definitely suggest an active crossover with this amp if you want clean sound.
54 found this helpful
Kicker cx 300.4 review
I bought this amp to push my Polk audio db 691 front and 651 rear I didn't think this amp would push the front well with 40 watts rms at 4 ohm but kicker always underrates there amps some mine was 341 rms total and this kicker amp is awesome pushes more then enough to them with the gain set at 65% and you get what you pay for kicker is more expensive then most but it's clear clean watts and I recommend 100 % I previously had alpine mrf 300 I honestly like kicker better
51 found this helpful
Simple amp with clean power
Class D technology has came a long way. The only full range class D I ever like was an Eclipse XA2000 with Bang and Olufsen ICEpower tech in it. While this amp isn't quite in the same class imo, it's a great choice from newer offerings. Currently running this amp on some JBL ms-62c components active off a DEH-80prs and sounds fantastic.
Not sure if it's from the amps "FIT" tech, or just got lucky, but I have almost an undetectable noise floor. No hum, buzz, whine, or anything.
Even at an underrated 40w, I set my gain to 40w, and it gets way loud before I get close to my max level, definitely good clean power!
49 found this helpful
excellent sq you just need to work settings on head unit.
I bought this kicker amp to power my memphis prv3 6.5 speakers. the sound great, like i said you need to find the correct settings on the head unit.good strong amplifier. As for durability it just came out about a year ago,we;ll see what happens.
46 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.