1200W Peak (300W RMS) CVP Series Class-AB 4-Channel Amplifier
Product highlights
• 55 watts x 4 channel @ 4 ohms
• 75 watts x 4 channel @ 2 ohms
• Bridged: 160 watts x 2 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class A/B 2 ohms Stable 4-Channel Amplifier
Cerwin-Vega CVP1200.4D owner’s manual
Internal Product ID:
169355
| 5 star |
|
40% |
| 4 star |
|
20% |
| 3 star |
|
20% |
| 2 star |
|
20% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great value
I upgraded the factory speakers in my truck and added this amp. What a difference I love it!
Verified purchase
37
found this helpful.Good price on a budget
I have this amp in my 2011 Chrysler 200 paired up with 4 6x9s HED H7692 w Power Acoustik NB1 tweeters @ 2 ohms.This amp is doing the job greatly,no distortion,very clean sound,so far i am satisfied of it's performance,just waiting for my 3 1/2 dash H735 wish will run off the JVC head unit.I highly recommend this amp if you or on a budget or not, you won't go wrong.....
Verified purchase
37
found this helpful.First cerwin
So this is my first Cerwin amp I'm excited to hear it. But as much as I paid for it you'd think you would throw in some stickers in the box so I could sport my gear.
Verified purchase
34
found this helpful.good while it lasted.
This amp worked great for 1 year and three days before dying. Out of warranty, of course. Still turns on, passes audio to output, but no signal to speakers. Hoping I can find schematics. Disappointed is an understatement.
Verified purchase
32
found this helpful.Good amp
I like the pass-through so a third RCA cable isn't needed to give a signal to a sub amp. Would just need a crossover calibrator to get those settings right. I installed it in a Buick Lucerne to power 6.75" front door speakers from Sound Ordnance and rear 6x9s from Pioneer. I left the A-pillar tweeters to run off the Pioneer head unit. Overall, I'm impressed. If I leave the high pass filters in the head unit off, there is a surprising amount of bass made. I keep them on set at 63Hz for the front and 80Hz for the rear. When a sub is added, I will use the amp to cross over at 100Hz. It gets loud, sounds good, and never gets hot. Good price for a good amp. Just wish it was a little smaller AND could find dyno sheets for it.
Verified purchase
32
found this helpful.
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology
5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Spade Terminals • 8 Gauge • 1 Red & 1 Black • Nickel Plated
Best selling similar products
• 100 watts x 4 channel @ 4 ohms
• 160 watts x 4 channel @ 2 ohms
• Bridged: 320 watts x 2 channel @ 4 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
$141.99
• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier
$349.99
• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier
$279.99
• 45 watts x 4 channel @ 4 ohms
• 65 watts x 4 channel @ 2 ohms
• Bridged: 125 watts x 2 channel @ 4 ohms
• Total RMS Power: 260 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
$88.99
• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
$359.99
