Alpine PXE-C80-88 + BRV-S65C + BRV-S65 + S2-W8D4 w/ Amp Kit and Baffle Kit

Product Details:

• PXE Series Class D 4 ohm Stable 8-Channel Amplifier
• RMS Power Rating:
• 4 ohm: 50 watts x 6 channel + 150 watts x 2 channel
• 2 ohm: 50 watts x 6 channel + 300 watts x 2 channel
• Total power output: 900 watts
• Wired bass remote control included
• Speaker-level (high-level) inputs
• Quick and real-time sound optimization
• Center image mode feature
• Hi-res audio playback at 96kHz/24Bit
• Real-time acoustic analysis
• Manual and automatic tuning through Alpine OPTIM App on iPhone (10+) or Android
• Manual and automatic tuning through Alpine OPTIM App on PC
• Eliminates factory EQ curve for clean sound
• AutoEQ with APVD Collection Quickly creates a flat vehicle response
• Included Remote Controller with quick access to presets and controls
• User-Friendly Interface Intuitive app for seamless tuning
• Factory Integration Seamlessly integrates with OEM systems
• 4 pairs of pre-amp outputs
• Signal sensing remote turn-on
• Frequency Response: 20 - 40000 Hz
• Total Harmonic Distortion (THD): 10%
• Signal to Noise Ratio: 100 dB
• Variable high-pass filter: 20 - 20000 Hz
• Variable low-pass filter: 20 - 20000 Hz
• Fuse Rating: 40A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 8.86" L x 8.68" W x 2.13" H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• MFR #: PXE-C80-88

Product Details:

• 6-1/2" 2-way Component System Car Speakers
• Power Handling:
• Peak: 300 watts per set / 150 watts each side
• RMS: 100 watts per set / 50 watts each side
• Polypropylene-Mica cone material
• High-Amplitude Multi-Roll (HAMR) speaker surround
• Features all-new wide open space surround design
• 1" Teteron Dome Tweeter with adjustable angles
• Iron oxide speaker magnet motor structure
• 30% deeper stronger bass for as low as 38 Hz
• Top-mount Depth: 2-3/8"
• Cutout Dimensions: 5-5/16"
• Impedance: 4 ohm
• Frequency Response: 38 - 20000 Hz
• Sensitivity: 84 dB
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty



Priced Per Complete Component System: 2 midwoofers, 2 tweeters.

Product Details:

• 6-1/2" BASSREV Series 2-way Coaxial Car Speakers
• Power Handling:
• Peak: 300 watts per pair / 150 watts each
• RMS: 100 watts per pair / 50 watts each
• Polypropylene-Mica cone material
• High-Amplitude Multi-Roll (HAMR) speaker surround
• Features all-new wide open space surround design
• 30% deeper stronger bass for as low as 38 Hz
• 1" Teteron Dome Tweeters
• Iron oxide speaker magnet motor structure
• Top-mount Depth: 2-3/8"
• Cutout Dimensions: 5-5/16"
• Impedance: 4 ohm
• Frequency Response: 38 - 20000 Hz
• Sensitivity: 84 dB
• Authorized Internet Dealer
• MFR #: BRV-S65
• 1-year Manufacturer's Warranty



Priced Per Pair

Product Details:

• 8" Dual 4 ohm S Series Subwoofer
• Power Handling:
• Peak: 900 watts
• RMS: 300 watts
• Polypropylene Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Redesigned for powerful and reliable bass
• Twist-Lock Grille Mount System
• Push-Type Speaker Terminals (Up to 8AWG Wire Size)
• 1.4" High Temperature Copper Voice coil
• 13 mm Xmax
• 34 oz. Double Stacked Ferrite magnet motor structure
• Frequency Response: 23 - 215 Hz
• Resonance Frequency (Fs): 47.9 Hz
• Sensitivity: 82.7 dB
• Recommended sealed box volume: 0.15 cubic feet - 0.50 cubic feet
• Recommended ported box volume: 0.71 cubic feet
• Top-mount depth: 3.71"
• Cutout diameter: 6.85"
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty



Priced Individually

Product Details:

• 4 Gauge 5/6-Channel X-Series Complete Amplifier Installation Kit
• Designed for car audio systems up to 1500 watts RMS
• Made from 100% Oxygen-Free Copper (OFC)
• Tinned conductors for corrosion resistance
• Pre-installed black nylon mesh covering protects the power wire from damage
• Solid brass and satin chromed ANL/Mini-ANL fuse holder offers ideal protection for high-powered systems
• Pre-terminated seamless power and ground ring terminals provide reliable performance
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• CEA-2015 and BC5W2 compliant
• V-Series RCA Interconnect Cable
• Shielded noise-rejecting coaxial construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Twisted-pair construction featuring two conductors per channel
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
2. 3 ft. Frosted Black 4 gauge ground wire with seamless crimp ring terminal
3. 17 ft. Clear 18 gauge remote lead wire
4. 60 ft. Frosted Black/Blue 16 gauge speaker wire
5. One 16.4 ft. 4-channel dual twisted construction RCA interconnect Cable (NVX XIV45)
6. One 16.4 ft. 2-channel dual twisted construction RCA interconnect Cable (NVX XIV25)
7. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 100 amp Mini-ANL fuse
8. One Black rubber firewall grommet
9. Two 4 Gauge Nickel Plated spade terminals
10. Four 18 Gauge Spade terminal
11. Two 18 Gauge Red butt connectors
12. Four 16 Gauge quick disconnect
13. Five 16 Gauge Nickel Plated spade terminals
14. Two Heat Shrink tubes with the NVX logo
15. Ten 6" Black zip ties

Product Details:

• Weatherproof Silicone Rubber Speaker Baffle Kit
• Compatible with 6.5" or 6.75" speakers
• Acoustically seals speakers for better sound performance
• Prevents front and rear wave cancellation
• Reduces panels vibrations
• Improves midbass response
• Foldable baffle allows for perfect fitment at varying depths
• Easy peel and stick egg crate base foam pad
• Mount Depth: 1-5/8" (Front)
• Mount Depth: 2-5/8" (Back)
• Sold as a pair
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty