Garage
Shop

Precision Power PPI PH.10

1800W Peak (720W RMS) 10" Phantom Series Dual 2-ohm Car Subwoofer

Product videos
highlight-star-icon

• Peak Power: 1800 watts
• RMS Power: 720 watts
• Impedance: Dual 2 ohm
• Non-Transfer Spruce Pulp cone
• Polyether Foam surround
• Mount depth: 5.63"
• Sensitivity: 85.8 dB

Learn more about the ph10

We apologize

This item has been discontinued

Product Highlights


• Peak Power: 1800 watts
• RMS Power: 720 watts
• Impedance: Dual 2 ohm
• Non-Transfer Spruce Pulp cone
• Polyether Foam surround
• Mount depth: 5.63"
• Sensitivity: 85.8 dB

Description


Precision Power brand icon

Authorized dealer


Precision Power PPI PH.10

PH.10 was designed and engineered in the USA; these subwoofers give you that sense of nostalgia throwback Flat Piston subwoofer look you remember with all the goodie goodies of today’s available technology for big output potential. Newer technology with the finest materials to consistently deliver you the best performance, sound quality, reliability, and value in the car audio industry. Phantom Series Subwoofers use fiberglass stranding woven together for ultimate strength and minimal elasticity. A heavy soaking in epoxy combined with the sonic qualities of pulp paper backing creates a premium feel.


Product Details:

  • 10" Dual 2 ohm Phantom Series Subwoofer
  • Power Handling:
    • Peak: 1800 watts
    • RMS: 720 watts
  • Non-Transfer Spruce Pulp cone
  • Polyether Foam surround with UV and chemical protection
  • Woven fiberglass flat piston diaphragm
  • Dual poly-cotton suspension
  • Hot forged 10mm top plate
  • 10mm T-yoke with center pole and back plate venting
  • High-temperature, low tolerance adhesives
  • Butyl rubber trim ring serves as a gap-sealing gasket
  • Nickel plated 8ga spring loaded compression wire terminals
  • 2-1/2" 4-layer oxygen-free Copper voice coil on Aluminum former
  • Single Stacked magnet motor structure
  • Resonance Frequency (Fs): 39.12 Hz
  • Sensitivity: 85.8 dB
  • Recommended sealed box volume: 1 cubic feet
  • Recommended ported box volume: 1.5 cubic feet
  • Top-mount depth: 5.63"
  • Cutout diameter: 9.6"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually

PDF IconPrecision Power PH10 owner’s manual

Subwoofer Wiring Guide


Wiring Guide to Wire 1 Precision Power PPI PH.10 Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

Wiring Guide to Wire 2 Precision Power PPI PH.10 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

Wiring Guide to Wire 3 Precision Power PPI PH.10 Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

Wiring Guide to Wire 4 Precision Power PPI PH.10 Subwoofers

2 Channel Amp

4 Channel Amp


Best selling similar products

JL Audio 10W0v3-4

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

(61)

$129.99

List price $129.99

NVX YSW104

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.90"
• Sensitivity: 85 dB

(1)

$149.99

List price $179.99

Kicker 47KBRW10 ReFLEX™

• 10" ReFLEX™ Passive Radiator
• Rubber covered plastic Cone
• Rubber Surround

$59.99

List price $69.99

Specifications & Details


Subwoofer Specifications
Series
Phantom Series
Subwoofer Size
10"
Peak Power Handling
1800 watts
RMS Power Handling
720 watts
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohm
Voice Coil Material
Copper
Voice Coil Diameter
2-1/2"
Sensitivity
85.8 dB
Subwoofer Design
Round / Circle
Main Cone Color
Black
Woofer Composition
Non-Transfer Spruce Pulp
Woofer Surround
Polyether Foam
Magnet Structure
Single Stacked
Subwoofer Grille
No
Re-Cone Kit Available
No
Recommended Enclosure Specifications
Recommended Enclosure Type
Ported / Vented
Sealed
Optimum Sealed Box Volume
1 cubic feet
Optimum Ported Box Volume
1.5 cubic feet
Top-Mount Depth (Mounting Depth)
5.63"
Cutout Diameter
9.6"
Shallow Mount Installation
No
Electromechanical Parameters
Free-Air Resonance (Fs)
39.12 Hz
Equivalent Compliance (Vas)
30.46 liters
Total Speaker Q Value (Qts)
1.15
Electrical Q Value (Qes)
1.38
Electrical Resistance of Voice Coil (Re)
2.2 ohm
Mechanical Q Value (Qms)
6.71
What is in the box?
Paperwork
User manual
WITB: Subwoofers
Subwoofer
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

PH.10

Weight:

17.50lbs

Internal SKU:

ph10

Internal Product ID:

68762

Product and How-to Videos


Customer Ratings & Reviews



5 star
75%
4 star
20%
3 star
5%
2 star
0%
1 star
0%



Durability
4.5
Value
4.9
Features
4.7
Design
4.7
Usability
4.8

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

very good

put 1 ph-10 in wifes toyota tundra with ppi 850/1 mono amp sounds really good in such a small box great subs for the price love ppi

By j on October 7, 2014

46

found this helpful.

phenominal boom for the buck!

I recently purchased 4 of these for a budget build in a Chevy Astro-van. I have these installed in a ported enclosure, 1.6 cu/ft per chamber, with a 4"diameter x 6"L port per chamber. I have these subs running off of a Soundstream TA1.3000D mono-channel amplifier with the subs wire to the amp presenting a 1 ohm load before box rise. This combination is outstanding, powerful output, clean, and it crushes low-bass tones. I haven't had this setup for very long, tis the reason for the lower durability scoring, but so far it sounds great!

By windguy on September 2, 2014

46

found this helpful.

quality boom for low bucks!!

I recently purchased 4 of these subs for a budget build in a 1995 Chevy Astrovan. I built a ported enclosure for these, 1.6 cubic feet per chamber with a 4" diameter x 6"L port per chamber. I have these subs wired to present a 1 ohm load (before box rise) to a Soundstream TA1.3000D. This combination/setup generated incredible output, clean/sharp bass and very impressive low-end bass response. Very nice subs even for more money.

By Dago on September 3, 2014

43

found this helpful.

Amazing !

I bought this sub given ALOT of previous PPI experience back in the 90's. I was not disappointed at all, it's being fed all the power it can handle in a sealed 1ft box crushing heavy metal to the max. Some songs are hard to "feel" but that has to deal with how they were recorded. When you play a well recorded track you will love this sub no doubt. Stop looking just buy !!!

By Sloth on June 7, 2014

42

found this helpful.

Bam

I have loved PPI since team Gates, if you don't know who they are better go back to car audio school , and these little giants take you back to the glory days of ppi. I have a planet audio ac 5000 running to of these is a down firing box in my Titan and they hit HARD.... Very clean and musical with almost every type of music and will handle dubstep almost flawlessly. The only thing wrong with them is they are about a quarter in smaller than the prefabbed box cutouts so had to make a gasket to go around them... other than that buy these suckers at this price.... looking at adding 2 more in the very near future.....

By PPI Power on September 24, 2013

42

found this helpful.

good looks and decent sound

Sound is good for a mid level sub. Does way better in a ported box versus sealed. If you cut the holes for the box tight you will have problems getting the sub in past the terminal leads but not a major issue.

By bucs03 on September 17, 2013

43

found this helpful.

Strangest sub ever

I just want to say I've been into car audio for along time and this speaker baffels me. I've tried it in three different size boxes from a little small with Polly fill, to a box that was on the money with and without Polly , and lastly, a box that was two cubic feet too big. They were all sealed boxes as well. I experienced the same results. The sub moves air but there is very little sound. Thought the amp may be bad so I hooked it up to a way overpowered amp same result.

By Ryan on September 17, 2013

43

found this helpful.

Great sound!

Went with these because i was on a budget. Sound great, sturdy design. In a ported box i ran a 137.5 measured. Not bad at all.

By Sarge on June 9, 2016

27

found this helpful.

Ppi ph.10

For the price it's hard to go wrong. It does pretty good in a ported box, the box I choose has some pretty annoying port noise ,I tried it in a sealed box and was not any good- speaker moves but barely any sound
I would recommend this for price as for durability not sure yet I've only had it in about 1 month, if it's anything like old ppi I'm not worried about longevity . It plays just as good as my morel sub it replaced at a quarter the price

By Nic on September 14, 2015

28

found this helpful.

Great sub for a great price

After spending a couple weeks looking for a subwoofer I finally purchased this one. Reason being is it fit my budget and would be able to fit in my vehicle with no modifications (crew cab truck). It's well constructed, weighs a decent amount for a 10, and I like the wattage ratings. Built a 1 cubic foot sealed box for it to fit under my back seat and hooked it up to a hifonics brz1700.1 and wired it to 4ohms. This thing puts out great bass. I usually keep the bass turned up to half just because I wanted the sub to mainly fill the lows I was missing with the stock system and it does just that and more when I want it to. All this is also ran from my stock deck with a LOC.

If you're looking for great sub for a good price this is definitely one to consider. Would buy another if I had the room.

By Cody on February 9, 2017 Checkmark Icon Verified purchase

25

found this helpful.


Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon