500W RMS, 4-Channel Amplifier
500 watts, 4-Channel Amplifier • RMS Power Output: 4 ohm: 90 watts x 4 / 125 watts x 4 • Frequency Response: 10 Hz - 50 kHz • MOSFET power supply • STAR Topology (minimizes internal noise and prevents ground interference) • Speaker and preamp-level inputs
Learn more about the mrpf550500 watts, 4-Channel Amplifier • RMS Power Output: 4 ohm: 90 watts x 4 / 125 watts x 4 • Frequency Response: 10 Hz - 50 kHz • MOSFET power supply • STAR Topology (minimizes internal noise and prevents ground interference) • Speaker and preamp-level inputs
Alpine products are warranted solely by Sonic Electronix, Inc. under the same period and terms as the original Alpine warranty. Sonic Electronix is not an Authorized Alpine Dealer and Alpine requires all merchandise purchased by Sonic Electronix customers to be returned solely to Sonic Electronix. Alpine products are also covered by our Standard Return Policy for returns on exchanges or refunds within 30 days from the date of purchase.
|
(newest, current model)
|
|
(previous model, replaced by Alpine HDA-F60)
|
|
(previous model, replaced by Alpine X-A70F)
|
|
(previous model, replaced by Alpine PDX-F4)
|
|
(previous model, replaced by Alpine MRX-F65)
|
|
(previous model, replaced by Alpine MRP-F600)
|
Best selling similar products
• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(23)
$279.99
List price $279.99
• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Bridged: @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(16)
$219.95
List price $250.00
• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier
(9)
$229.99
List price $249.99
Internal Product ID:
8519
| 5 star |
|
86% |
| 4 star |
|
14% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Never Seen Better For The Money
I just recently bought this amp. I hooked it up to Type-R 6x9s, and WOW it gets extremely loud. I don't even have the gains half of the way up, and it's gets too loud where it starts to hurt your ears. The sound quality it produces is phenomenal. I haven't had any issues with heat. Setting it up was easy, and the controls were easy to follow.
Honestly, I can't see why anybody would buy another amp that puts out this equivalent of wattage. It's cheap, and blow-your-head-off loud.
36
found this helpful.Best 4 channel for the money, *****
I've owned more than a dozen 4 channel amps over the last 30 years and this amp is a winner! The sound is crystal clear powering Infinity Kappa 60.7cs in front and Kappa 62.7i in the rear. the highs sparkle at high and low volume and the gain is only at 75%. DO NOT MISS THIS DEAL!
30
found this helpful.great amp
I have this hooked up to some pioneer speakers I bought here as well, and they sound unbelievable. Plus its alpine quality so you know your not getting cheap stuff.
29
found this helpful.good buy
a bit large for the power output, but the sound quality is fine, it has not overheated or had any complications. if you have room for it, I would recommend it
29
found this helpful.Great amp for mids, highs
I just bought this amp off a buddy of mine for the speakers in my car, and this amp helped my speakers compliment my JL w7 so well. Highly recommended
30
found this helpful.Makes my speakers SCREAM!
Bought this from sonicelectronix, and have it hooked up to polk momo 6 1/2 components in the front and 4x6 momo plates in the back. I absolutely love how it makes them sing.
28
found this helpful.LOUD AMP
i have this amp hooked up to a set of MA components in the front and infinity kappas in the back and they scream. I recently got it all hooked up and am very impressed. Its alpine so the reliability will be great, awesome bang for buck!!
28
found this helpful.
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
The XLOC44X helps you easily integrate with your factory or aftermarket system
16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology
5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
