3000W Max (1800W RMS) Class D Monoblock BB Series Car Amplifier
• RMS: 780W x 1 @ 4 ohms, 1260W x 1 @ 2 ohms, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H
Choose from any of our many bundles that include this product for even more savings!
Belva BB3000Dv2 with Amplifier Wiring Kit
3000W Max (1800W RMS) Class D Monoblock BB Series Car Amplifier
(52)
$174.98
• RMS: 780W x 1 @ 4 ohms, 1260W x 1 @ 2 ohms, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H
These amplifiers are built with a high-quality, organized circuit board. Every amplifier in the BB Series has high power output. The BB3000Dv2 is capable of outputting 1800 watts of RMS power. This amount of power is sure to be able to adequately supply most subwoofer systems with the proper amount of wattage. Belva amplifiers will keep your woofers pumping out deep bass with honest sound reproduction and reduced distortion.
Note: Internal fuses are not included, so an external 200-240 Amp ANL Fuse is required to safely operate this amplifier.
Internal Product ID:
98663
Budget Banger!
I bought this one (after seeing the dyno test from Williston Audio on YouTube) to power a single D2 12 inch sub. 1350 ish watts certified makes it move well and that makes me happy- perfect for the daily driver. Still getting the small details of the install worked out, but she's dialed in with the oscope and doing work!
20
found this helpful.Good amp...
I was hesitant on this amp because of the price, but once I seen the dyno test on YouTube, I was sold. Not hitting its rated power, but dyno tested at 540 watts rms @ 4 ohms, 900 watts rms @ 2 ohms and 1300wrms @ 1 ohm, its was enough for my needs, as I was using this amp and a 10 inch 1000 watt rms
Evl skar sub in a sealed box @ 4 ohms to relieve stress on my Jl 10w7 sub and 500/1 slash amp. With the belva amp and skar sub this combo really added depth and richer bass to the w7. The belva amp at 4 ohms really gets down, with my skar sub under powered, sub jumps out the box at 3/4 gain. Might re-wire sub to 1 0hm once my electrical system gets to par, but for now, good amp!!!!!
20
found this helpful.Bang For Your Buck
Bought this to replace a version 1 BB2000D as part of a system upgrade requiring just a bit more power. I have come to trust Belva to reliably rate their amps, and provide clean power at a reasonable price. The old Belva got moved to a second vehicle since it's still kickin' like new.
19
found this helpful.Best buy ever.
It's not what I though I was going to get it has exceeded my expectations considering the price of the product. It's definitely One to look for.
18
found this helpful.Great Price and Crazy Power
Great Price and Crazy Power. Running two audiopipe txxbd312 and dont even have this half way up and the subs are pounding extreme. Tons of power available.
17
found this helpful.Good price for good power
I used this on a daily vehicle with 1-12 Alpine Type R ported belva box and trust me it bangs
15
found this helpful.Great deal
Have 2 of these running 4 alpine 15" type r's each @1ohm work great, do not get hot at all great bargain amp definitely make there rated RMS power can smell the coils on the subs after a loud song just make sure you feed them the power! The amps would shut down on a loud bass note before i upgraded to a 270 amp alt.
13
found this helpful.Bad ass amp
I bought this amp last this time last year , I'm running 2 ARC 15D2 750WATT AND it pump the hell out of them .
My neighbors hate when i leave or coming home...... if you're second guessing about buying because of the price ,you will be making a mistake....great amp
12
found this helpful.Best amp for the price
I've owned several amps but my first what a Belva 1000 watt pushing two tens. Sounded great but I wanted to upgrade. I've had 10's, 12's, and now a 15. All my other amps either sounded like crap or couldn't put out what they said they could. Now I'm running a BAMF 152 with the Belva 3000 what and it BEATS. I keep getting called to the office at work for rattling the windows in the building. Best amp I've owned.
11
found this helpful.Big power in a compact size
Pretty decent amp for price and size... But upon recieving I couldn't help but notice it really wasn't "new".. A refurb model I received.. It does cut off at higher lvls, metered 1.33 ohms currently so it's not even the minimum load it can take but still cuts off.. Will try a few test before ruling out the product.. But I will recommend this item all day.. Jus got a bad apple maybe that's all..
11
found this helpful.Best selling similar products
• RMS: 1250 x 1 @ 4 ohms, 1950W x 1 @ 2 ohms, 2700W x 1 @ 1 ohm
• Total RMS Power: 2700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 13.7"W x 5.4"D x 2.0H
(27)
$279.99
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(33)
$164.95
• 380 watts x 1 channel @ 4 ohms
• 600 watts x 1 channel @ 2 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable Monoblock Amplifier
$219.00
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(24)
$239.99
Kicker CXA1200.1 (46CXA12001T)
• 600 watts x 1 channel @ 4 ohms
• 1200 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier
(5)
$399.99
Save up to 10 different vehicles in your garage