Universal-Fit Audio for 1977 Ford Bronco

---

• 8" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.5 cubic feet
• Premium Black Carpet with Black NVX Logo

• 12" Amplified Loaded Subwoofer System
• 230 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• PRO Series ANL Fuse Holder
• Accepts Any 5/16" Ring Terminal
• Ultimate Power ANL Fuse Protection
• Corrosion Resistant Shoc-Krome-Plated
• Protective Cover Included

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 6.43"
• Sensitivity: 84.6 dB

• 12" SoloX Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 1-ohm
• Alignment shims are included for installation

• 15" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 4.38 cubic feet

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• Works with both Factory and Aftermarket Audio Systems
• Single 12" Belva Subwoofer
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• Wired transom remote with full color display
• Complete duplicate control of WS-MC-20
• Full color 3" TFT display with back-lit buttons
• 23 ft. extension cable included

• 100 watts x 4 channel @ 4 ohm
• 200 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 5 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: White

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Injection Molded Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 8 11/16"
• Sensitivity: 88.56 dB

• 2-Way Remote Start, Keyless Entry and Car Alarm Smartphone Module
• Add-on system for your Viper SmartStart-compatible car security systems
• GPS and LTE cellular technology for unlimited range
• Supports multiple vehicles

• Sealed enclosure with 2 12" Solo-Baric L7T Series Subwoofer
• 1200 watts RMS Power
• Final Impedance: 2-ohm
• Dimensions: 38-3/16" L x 8-1/4" H x 17-1/8" W

• Digital Panel Back Up Monitor with Built-in Miracast
• 7" HD Digital Panel
• Mirrors Smartphone Device to the Monitor
• Parking Guidelines
• Cell phone charge
• Built-in Speaker

• Multi-Stage Charging
• Output Display
• Internal Cooling Fan
• Voltage Monitoring

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.5"
• Sensitivity: 85 dB

• Peak Power: 7000 watts
• RMS Power: 3500 watts
• Impedance: Dual 1 ohm
• Treated Paper Cone
• Treated Foam Surround
• Sensitivity: 91.58 dB

• Roadkill Expert Series Sound Damping Material
• Bulk Pack
• 36. Sq. Ft. total
• 9 Sheets
• Perfect for Entire Vehicle Protection
• Easy Cut and Apply Method
• Self Adhesive

• Handlebar Mount Hardware and Accessories for NVX XUBT3 Controller
• NVX XUBT3 Controller Sold Separately
• Fits Most Handlebars Up To 1" Diameter
• Perfect for Motorcycles, bikes and ATVs

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 3-3/4"
• Sensitivity: 85.5 dB

• Universal 3/8" Single DIN Spacer
• Accommodates ISO single DIN mount
• Painted to match factory dash color
• High-Grade ABS plastic construction
• Factory style texture

• 2000 watts x 1 channel @ 4 ohm
• 2500 watts x 1 channel @ 2 ohm
• 2500 watts x 1 channel @ 1 ohm
• Total RMS Power: 2500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 1200 watts
• RMS Power: 400 watts
• Impedance: Dual 2 ohm
• Hybrid Polypropylene-Treated Paper cone
• TPE Surround
• Mount depth: 5.96"
• Sensitivity: 85 dB

• For Ultra-luxury high-end vehicles
• 12-24V universal usage
• Environmentally friendly and flame retardant materials
• Suitable for refit control of all equipment in the car
• Output short-circuit protection, overload protection
• Suitable for installation and use of all 12/24v battery vehicles

• 1” Aluminum Pro Audio Marine Horn Tweeter Kit
• 800 watts Peak Each
• 200 watts RMS Each
• 4 ohm Impedance

• Universal Equalizer Pocket
• Painted to match factory dash color
• High-Grade ABS plastic construction
• Factory style texture

• Electric protection system
• (1)Lab-Bus port for transmitting data
• Measures voltage from 1 to 300 volt
• Measures impedance
• Measures alternating current circuits with frequency up to 15000 Hz
• Dual-channel ADC module
• Shockproof plastic material

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 5.19"
• Sensitivity: 85 dB

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 600 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 4-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• Complies to American Wire Gauge standards

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Polypropylene Cone
• Mega Roll V2 Surround
• Mount depth: 9.5"
• Sensitivity: 78.24 dB

• Electronic Noise Suppressor Filter
• Actively cleans noises generated by sources
• Handles 35 watts of power
• New, smaller easy to mount design
• Molded channels so zip ties will not slip

• 500 Watts RMS
• Sensitivity: 84.87 dB
• 2 Ohm Final Impedance
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• JL Audio's patented, chamber-coupled port design
• Gray carpet wrap
• fine-tuned through extensive real-world listening

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 19mm (3/4") mounting hole size
• Red LED illuminated ring

• 1.75" Roll Cage Mounting Clamps for SSV Works MRB3
• Easy installation iwith ring clamps and billet mount plate
• SSV Works MRB3 sold separately

• Transceiver Antenna
• Cable Included

• Extreme LEDCast Lighting Whip Kit with Controller
• Long range RF remote, and smartphone BLE app
• Create custom lighting presets
• IP66-rated for dirt and moisture resistance
• Optional light control to vehicle's brake, reverse and turn signals

• 60 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• 6-Position High-Power Battery Terminal
• Positive and negative polarity
• 5/16" stud connectors to accept most ring terminals
• Nickel-plated brass connection posts

• 6 ft (1.83 m) Marine Audio 4-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts

• Side Post Terminal Adapter
• Brass Construction and Finish
• Plastic Insulated Conductors
• Compatible with Most Stinger Batteries

• 55 Amp Power Supply
• Built-In 4 Stage Smart Charger
• Overtemp Protection
• Deck Mounted Converter
• Max Output: 780 Watts

• 610 watts x 1 channel @ 4 ohm
• 1280 watts x 1 channel @ 2 ohm
• 2000 watts x 1 channel @ 1 ohm
• Total RMS Power: 2000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 1.375"
• Color: Black

• 50 Watts RMS x 4 @ 4 ohm
• 100 Watts RMS x 4 @ 2 ohm
• 200 Watts RMS x 2 @ 4 ohm, Bridged
• Built In NOMAD "Real Time" Analog Computer
• 4/3/2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability

• Works with select SoundExtreme speaker systems
• Designed for marine and outdoor environments
• Play/Pause/Track Buttons
• Control volume, track selection, power as well as LED light scenes.

• Universal underseat amplifier bracket
• Designed for Jeep JL and JKU front seat configurations
• Includes nutserts and drill bit for easy installation

• Water-Resistant Master MAXI Fuse Block
• 4 AWG to 8 AWG Power Wire
• Used In Under-Hood Applications For Amp Installation

• USB / HDMI / Auxiliary Replacement Panel
• Replaces the factory USB and auxiliary panel
• Compatible with 2011-2020 Hyundai, Kia

• 1/0 Gauge Amplifier Installation Kit
• For Amplifiers Up To 2000 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL Fuse Holder with 100 amp fuse
• Complies to American Wire Gauge standards

• 20 Ft. Of 12 AWG Q-Series Speaker Wire
• Direct-Connect Engineering
• Twisted-Pair Technology
• Full Spec Wire True to Gauge
• Hyper-Flex Technolog

• 125 watts x 4 channel + 300W x1 @ 4 ohm
• 200 watts x 4 channel + 500W x 1 @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 800W @ 1 ohm
• Total RMS Power: 1600 watts
• Class D 1 ohm Stable 5-Channel Amplifier

• 20ft. 9-Conductor 18 Gauge Twisted Multi-Use Wire
• Ideal for OEM Integration connections or 4-Channel speaker wiring
• Colored coded design eliminates confusion during installation

• 6.5" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 0.30 cubic feet
• Compatible for Sundown SA65V2 and similar subwoofers (Sold separately)

• Universal Double DIN housing
• Designed for the installation of Double DIN radio
• Can be mounted on top or underneath any surface

• 1-Way Remote Car Starter
• 5-Button LED Transmitter
• 2000 feet of range (0.37 mile)
• Dual 2-way data port
• Multi-vehicle functionality

• Low-Profile Fixture
• For M880-ETXv3, M770-ETXv3 and MX770-ETXv3 models
• Fixture is designed for late-model MasterCraft mounting only
• Sold in pairs