Universal-Fit Audio for 1986 Mazda 323

---

• 4 Gauge Power and Signal Installation Kit
• 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
• FULL Spec Cable Meets or Exceeds AWG (American Wire Gauge) Requirements
• Includes Appropriate Wire Termination Hardware

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 1210 watts x 1 channel @ 4 ohm
• 2200 watts x 1 channel @ 2 ohm
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 1-Channel RCA Compact Noise Filter
• Number of channels: 1-Mono
• Input type: Female RCA
• Output type: Male RCA

• Y-cable for WS-MC-20s wired transom remotes
• Allows connection of up to 2 transom remotes to the source unit
• Designed for use with WS-MC-20 marine source unit
• Works with WS-G2-CTR and WS-G2-TR transom remotes
• Features marine grade construction materials

• 12-volt Automotive Absorbed Glass Mat (AGM) Battery
• Sealed Absorbed Glass Mat (AGM) design
• Perfect for 600 watts car audio stereo systems
• Can be mounted in any position
• Can be fully discharged and re-charged

• 50 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 75 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Sealed enclosure with 2 12" Terminator Series Subwoofer
• 200 watts RMS each
• Final Impedance: 2-ohm
• Dimensions: 29.63" L x 14" H x 13.5" W

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• 600 watts x 1 channel @ 4 ohm
• 1200 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Pair of empty single 1" tweeter pods
• Designed for C3 or C7 Tweeters (not included)
• Hard coated with a black anodized finish
• Easy mounting on almost any flat surface

• RGBIC LED strips for 6-seater golf carts
• IP66 Waterproof and Rugged Design
• UV Protected Materials
• Million color RGB LED Party Lighting
• LEDCast Enabled

• Universal bass knob with voltmeter and LED temperature sensor
• Compatible with most stereos and amplifiers
• Features remote amplifier trigger
• Digital Volt Meter (10V-15.9V)
• Temperature Sensor (0°-125°C/32°-257°F)
• Rotary push turn On/Off for amplifier remote

• 6-Channel 4000 Series RCA Interconnect Cables
• 12 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Perfect for 5-Channel Amplifiers
• Durable Construction

• 12" Single Truck Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.27 cubic feet

• Adds additional inputs to display to monitor(s)
• Works great with vehicles limited to only one video input
• Equipped with a noise resistant aluminum shield
• Kit includes module and male to male RCA cable adapter

• Platinum-Plated Contacts
• Ultimate Circuit Protection
• High Conductivity Plating
• Maximum Current Transfer
• Designed to Fit Maxi Fuse Holders

• 8" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.5 cubic feet
• Premium Black Carpet with Black NVX Logo

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 1 ohm
• Mount depth: 5.22"
• Sensitivity: 84.7 dB

• 12" Amplified Loaded Subwoofer System
• 500 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Wired Remote Bass Level Control

• Door Lock Pulse Generator DEI 452T
• A door lock pulse generator to convert a positive or negative latching input to door lock and unlock pulses

• 10" Single Ported Subwoofer Enclosure
• Fits JL Audio W7/W7AE series subwoofers
• 1" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 1.5 cubic feet

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Peak Power: 900 watts
• RMS Power: 450 watts
• Impedance: Dual 2 ohm
• Injection Molded Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 4-3/4"
• Sensitivity: 82.37 dB

• Mesh grille for select NVX 10" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• Dual USB water resistant knockout panel
• Mounts in dash
• Includes protective cover
• Uses a 1-1/8 inch mounting hole

• 2-Way 5-Button Remote Start and Car Alarm LED Transmitters
• Includes (1) 2-way LED transmitter and (1) 1-way transmitter
• 1 mile range
• Compatible with Viper DS4 and DS4P security systems

• Marine Bluetooth Rocker Switch Receiver
• Add-on controller for amplified soundbars and speaker systems
• Controls volume and tracking
• 3.5mm female connection for main output

• Marine stereo AM/FM antenna with flexible mast
• Includes 180° swivel base and 54" antenna cable
• Made with durable steel and corrosion-resistant rubber cover

• 3.7M and 2.0M Recording
• 2 Megapixel Recording (rear cam)
• 2" LCD Display (front cam only)
• Integrated GPS system
• IP67 waterproof rating (rear cam only)

• 12" SoloX Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 1-ohm
• Alignment shims are included for installation

• 1/2" DynaLiner High Performance Insulation Kit
• Used on Top of Dynamat
• Provide High Acoustic Absorption and Excellent Thermal Insulation
• Contains One 32" x 54" Sheet
• Ultra Lightweight & Flexible

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• 6.5" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 0.6 cubic feet
• Compatible for Sundown SA65V2 and similar subwoofers (Sold separately)

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• 5" RGB LED Light Whip and Flagpole
• 160 super bright 5050 RGB LEDs
• Customized lighting with 20 static colors and 9 dynamic modes
• Five different speed and brightness levels
• Remote control included

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 19mm (3/4") mounting hole size
• Yellow LED illuminated ring

• Universal Single DIN storage pocket
• Install Single DIN in a Double DIN dash opening
• Mounts above or below the stereo
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 2 ohm
• Pressed Paper Cone
• Pressed Foam Surround
• Mount depth: 4.98"
• Sensitivity: 82.4 dB

• 4/8 Gauge In-line Fuse Holder
• Satin Chrome Plated For Excellent Power Transfer And Great Design
• Screw Terminals Hold Cables Securely In Place
• Smoked Heat Resistant Housing

• 10" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 2.90 cubic feet
• Premium Black Carpet with Black NVX Logo

• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations

• Power Input: 12V, 5A
• Dual receiver modes: EcoCast and Bluetooth
• Connect to any audio product with audio input jacks

• Replacement Antenna for AM/FM Bands
• Top Mount Design Made For 1" Hole

• 520 watts x 2 channel @ 4 ohm
• 750 watts x 2 channel @ 2 ohm
• Bridged: 1500 watts x 1 channel @ 4 ohm
• Total RMS Power: 1500 watts
• Class D 2 ohm Stable 2-Channel-Channel Amplifier

• Universal Bluetooth Receiver and Remote Control
• Replaces head unit and works with most aftermarket audio systems
• Provides wireless power, volume and tracking commands
• Surface mount, flush mount, and clamp mounting options

8" Grille made specifically for the JL Audio 8W1v2, 8W1v3, 8W3v3 Sub • Provides the Best Protection Possible • Top-Notch JL Audio Quality • Metal Mesh Grille Painted Black

• Universal square terminal cup for speaker and subwoofer boxes
• Nickel-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• 6-Channel digital sound processor with Automatic Sound Tuning
• 31-Band parametric and graphic equalizer
• Includes remote control and mounting hardware
• Sound tuning with AutoEQ 2.0 on Apple iOS or Android
• Instant precision with center image mode
• Features presets for every playlist

• True Spec 12 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Translucent EnvyFlex flexible multi-strand construction

• Water-resistant
• (1) 1/0-4 AWG inputs
• (2) 4/8 AWG outputs
• Gate lock technology

• 6-Spot Universal Lug-Style Ring Battery Terminals
• Designed for large-gauge power and ground connections
• Aluminum-plated build that resists corrosion
• Compatible with car, motorcycle and powersports applications
• Sold as pair

• 3.5" Punch V2 Flush Mount Speaker Mesh Grilles
• Designed for use in select Rockford Fosgate Punch V2 speakers
• Flush mount design for a seamless appearance
• Ideal for mounting low-profile speakers with shallow grilles

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 8" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Dual 2 ohm
• Mica Injected Polypropylene - MIPP Cone
• Poly-Foam Surround
• Mount depth: 4.319"
• Sensitivity: 87 dB

• 80 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Push button reset can also be used as a kill switch
• Easily mount on firewall or other panel