Universal-Fit Audio for 2000 Ford Excursion

---

Bass Blockers • Removes Low Frequency Sounds • 0-5.6 kHz @ 4 Ohm • 0-2.8 kHz @ 8 Ohm • Black Wire Color

• Universal Trigger Output Module
• 16 programmable features in one unit
• Pulsed, latched, or timed output
• User adjustable and programmable
• Digital timing control

• PAC LD-10 Line Driver with Signal Booster
• Boost Your Signal and Gain the Most Power Out of Your System
• 10X RCA Signal Booster
• Solid State Ground Loop Isolation
• Left and Right Gain Level Adjustment

• Video Unlock trigger module
• Unlocks video playback for aftermarket radios while vehicle is in motion
• Works with all popular brand radios like Pioneer, Kenwood, Alpine and more
• No Programming Required

• RCA Noise Filter
• Close to perfect response of +/- .03 dB from 20 Hz - 20kHz
• Eliminates ground loop noise
• Reduces most noise

• Ground Loop Isolator
• Close to Perfect Response of +/- 0.03 dB From 2-20,000 Hz
• Utilizes Proprietary Audio Transformers for a 1.3 dB Gain
• Female 3.5mm Input
• Male 3.5mm Output

&bull Pair of Bass Blockers for 6" x 9" Speakers
• Blocks 0-300Hz @ 4 Ohm
• Blocks 0-150Hz @ 8 Ohm
• Filters Out Unwanted Frequencies Towards Speakers

&bull Pair of Bass Blockers For 4" Speakers
• Blocks 0-1200 Hz @ 4 Ohm
• Blocks 0-600 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• Easy two wire hook up
• Small and easy to mount
• 40 kHz and 56 kHz operation
• Great for RV's, marine, custom hot rods and many other applications

• Pair of Bass Blockers For 6" Speakers
• Blocks 0-600 Hz @ 4 Ohm
• Blocks 0-300 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts

• Converts differential video signal to a single-ended composite video signal
• Improves display of OE camera on the aftermarket radio
• Reduces/eliminates video noise
• Two-wire power connection for simple installation
• Great for Ford and Chrysler vehicles and many more

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• Universal Wired Bass Remote
• Multiple mounting options
• Features stereo RCA input and output
• No additional wiring needed for installation

• Universal fit
• Supports 4 cameras, front, rear, back and sides
• Works on factory and aftermarket radios, factory radios require interface
• Automatically activates when put in reverse or turn signals activated

• Switchable Positive or Negative Trigger
• Slim and Compact Design
• Plug and Play Connection

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• Universal rubber mast top side mount antenna
• Support and elevate an antenna for AM/FM
• Features 1" swivel base for easy adjustment

&bull Tone Generator • Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff

• Universal Steering Wheel Control Interface
• Plug and Play installation
• Provides Conguration Information for Dip Switch or Direct Flash from PC APP

• 1-Channel Line Out Converter
• Designed to integrate with aftermarket or factory OEM systems
• Maximum Input: 45 watts

&bull 4-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• LPH speaker extension harness
• Compatible plugs and color-coded wires
• Length: 17 feet

• 2-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• Supports up to 10 Amps of current at 12v
• Eliminates noise on the power leads of radios
• Wide frequency audio noise suppression

• 33-ohm/5-wat load resistors for amplifier integration
• Required when the factory amp or radio needs a speaker load to say operational
• Pack of 5

• Two-wire steering wheel control input adapter
• Designed for PAC SWI-CP2 and other PAC steering wheel control interface
• Retains the SWC function in vehicles with compatible stereos

• 4-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• 2-Channel Line Output Converter
• Designed for adding or retaining an amplified system
• Accepts both high-level and low-level inputs
• Remote level controller included

• 4-channel active line out converter
• Speaker Level handles up to 400W RMS
• Selectable turn-on mode
• 9.5Vrms output
• 12-volt turn-on lead output

• Universal 12" female-to-female antenna adapter
• Maintains full AM/FM
• Plugs directly into factory antenna harness

• 4-Position Switch Selects Desired Voltage Output
• 3.3V for some cameras as a replacement power supply
• 6V for OE reverse camera retention
• 9V for use with a wide range of devices that run on 9V

• Quantity: 5
• Variable Resistors
• Adjustable from 0 ohm to 5000 ohm
• Color; Grey and Black

• Universal 8.75 ft. AM/FM Antenna
• Cable with male Motorola connector
• Amplified for improved FM signal
• Durable PVC plastic covering and copper wiring

• Universal ISO Bracket
• Designed for the installation of Stinger ELEV8 (UN1880) Stereos
• Compatible with select dash kits

• Dash Mounted Amplifier Level Control for Volume Adjustment
• Perfect For Balancing the System to Change Music Styles
• Adjust Amplifier Gain While Driving