Universal-Fit Audio for 2003 Mercury Sable

---

• For High-Powered systems
• Bright Blue LED Voltage Display
• Improves Bass Response (SPL)

• Double-DIN Dash Kit
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• For positive or negative battery post use
• Add a Post System
• >Solid brass construction

• 7 Meters
• 12 Gauge Speaker Wire
• High Strand Count for Maximum Flexibility
• 23 Foot Length

• Dual Outlet Portable Power Inverter
• Surge Power Output: 600 watts
• Continuous Power Output: 300 watts
• USB port included for charging compatible devices
• Internal cooling fan keeps the inverter from overheating

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• 2-Way Replacement Remote
• 5-Button Transmitter
• 1 Mile Range
• Color: Black

• 1.38 square feet sound deadening kit
• Solid black design for any stealth car audio installation
• Material Used: Vibration Dampener
• Material Thickness: 0.091
• Install Location: Speaker
• Pack includes two 10" x 10" sheets

•Dual 10" 10W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• Gauge Reducer Adapter
• 1/0 Gauge Input to 4 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• Prevents Primary Battery Discharge
• Maximum Current Transfer
• Ideal for 2nd Audio Battery Isolation from Vehicle Systems
• 500A Constant/ 900A Peak

• Weatherproof Bluetooth Marine Receiver
• For use with hideaway remote audio receiver or dash-mount controller
• Connects with up to 35 ft (11 meters) of wireless range
• IPX8 marine-grade rating

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• Active 2-channel bass restoration processor
• Parametric Bass Controls
• Up to 9.5 Volts of output
• Load selection switch (20, 60, or 20K ohm)
• Remote bass level control included
• Preamp and speaker-level inputs
• Auto turn-on
• LED Clip indicator

• Composite RCA to direct camera adaptor
• Compatible with all Alpine stereos with direct camera input
• Ideal for adding any aftermarket camera
• Plug and play, no cutting or splicing required

• 10" Amplified Loaded Subwoofer System
• 180 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Stinger Select Circuit Breaker
• Power Rating: 250 Amps
• Push Button Reset
• Water Resistant Housing
• Integrated Holes for Simple Mounting
• Compact and Lightweight Design

• Brass Construction
• 4 GA to 8 GA
• Nickel Plated Finish
• Large Set Screws

Stacking Hardware for Three Slash v2 Amplifiers
• Made With JL Audio High Quality
• Precision Machined
• Colored Black

• Water-resistant RGB LED Controller
• Designed in tandem with RGB MPS app
• Select from 10 speeds and 20 modes
• Sync LED to your music via Smartphone Bluetooth feature
• Compatible with MPS-RGBWWS4 (Sold separately)

• Stinger DoubleGuard Shock Sensor
• Adjustable Sensitivity
• Wire Harness Included

• 10" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

• 1-Way Keyless Entry Car Alarm System
• 4-Button Transmitter
• 1/4 mile (1320 feet) range

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D amplifier
• Variable bass boost
• Speaker-level inputs

• BassPro Go Vehicle Installation Kit
• Designed for installing a JBL BassPro Go powered subwoofer in another vehicle
• Vehicle mounting bracket, hardware and harnesses included

• 300A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• Passive Crossover
• 250W Max and 125W RMS
• Dual Woofer Outputs
• Includes Mounting Hardware
• Designed for Punch Pro Midrange Drivers and Tweeters

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• Direct Power Smartcord for Escort Radar Detectors
• Blue LED Light Notifies You of Alerts
• Built-in Mute Button to Silence Audio Alerts
• Works with all current generation escort windshield mounted detectors

• Universal Rear View Backup Camera
• Mounting Style: Full License Plate Frame
• Resolution: 720 x 480 
• Waterproof: Yes
• Nightvision: Infrared LED's

• 4 Gauge Solid Copper Ring Terminals
• Shrink Tubing
• Pure Copper with Nickel plating for optimal Current transfer
• Color: Black
• Count: 4

• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay

• Heavy duty terminals for serious applications
• Lightweight 3/4" PVC
• Won't break or leak under high pressure
• 5/16" Bolt Terminal
• All Grade 8 Hardware
• Two Channel

• Six Piece Installer's Removal Tool Kit
• Durable Nylon Plastic

• 150 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.51"
• Sensitivity: 84 dB

• Universal dual-screw monitor mount
• 4" slightly curved neck from mounting surface
• Mounts to any flat surface

• 2.4" Rear view mirror with front HD camera
• Adjustable 1080P HD front facing camera
• 1-Channel FHD DVR (Digital Video Recorder)
• Built-in motion detection, loop recording, park guide
• Includes built-in G-sensor, mic, and speaker
• Easily straps onto original mirror

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• 13" Grille Made Specifically for the JL Audio 13W1v2, 13W3v3, or 13TW5 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• Universal 4" Double DIN Installation Trim Kit
• Accommodates ISO double DIN mount
• Painted to match factory dash color
• High-Grade ABS plastic construction
• Factory style texture

• Universal Vehicle Alarm/Remote Start Power Window Automation Kit
• Automatic Roll-up/down windows from your Alarm/Remote Start controller
• Can be used for sunroof
• Compatible with All Encore Remote Start and Security Systems
• Compatible with All Encore Remote Start and Security Systems

• Universal Antenna Extender
• Extends Antenna 6" (.5 ft.)
• Right Angle Male Connector

• Complete 0 Gauge Amplifier Installation Kit
• Designed for Systems up to 3600 Watts
• Includes Everything Needed for Installation
• Premium Power and Ground Cable

• 10-pack 1/0-gauge Heat Shrink
• Protect your cable crimp ends with style
• Color: Black

• 10.1" High-Resolution Digital LED Backlit Overhead Monitor
• Built-in DVD, USB and HDMI inputs
• Dual channel IR headphone transmitter with 2 headphones
• Display Type: TFT Active Matrix LCD
• Screen Resolution: 1024 x 600

• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 1 ohm
• Mount depth: 7.85"
• Sensitivity: 88.30 dB

• Converts differential video signal to a single-ended composite video signal
• Improves display of OE camera on the aftermarket radio
• Reduces/eliminates video noise
• Two-wire power connection for simple installation
• Great for Ford and Chrysler vehicles and many more

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• Ground Loop Isolator
• Close to Perfect Response of +/- 0.03 dB From 2-20,000 Hz
• Utilizes Proprietary Audio Transformers for a 1.3 dB Gain
• Female 3.5mm Input
• Male 3.5mm Output

• 5 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• Fully Active, 2-Channel Remote Level Control and Line Driver with Pass-Through Outputs
• Minimizes Unwanted Noise
• Active Circuitry
• Control Knob
• Pass-Through Connection

• Ported enclosure with 2 12" Solo-Baric L7R Series Subwoofer
• 1200 watts RMS (2400 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 15-7/8" H x 15-1/4" W x 20-3/8" W2