Universal-Fit Audio for 2012 Ford Flex

---

• Ring Terminals
• 3/8" Opening
• 4 Gauge
• 3 Red & 2 Black
• Nickel Plated
• Resealable Polybag

• Rear View Mirror with Backup Camera Monitor
• Built-in auto-dimming, temperature, and compass display
• Monitor Screen Size: 4.3"
• Monitor Screen Type: TFT LCD

• 10" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Wired marine remote control without display
• Compatible with select Clarion stereos
• Easily adds up to 3 remotes
• IP67-rated water resistant design

• 36 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Entire Vehicle
• Pack includes nine 18" x 32" sheets

• Universal Vehicle Alarm/Remote Start Power Window Automation Kit
• Automatic Roll-up/down windows from your Alarm/Remote Start controller
• Two window Kit
• Intelligent safety sensor

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• 2-Way 5-Button Remote Start and Car Alarm LED Transmitters
• Includes (1) 2-way LED transmitter and (1) 1-way transmitter
• 1 mile range
• Compatible with Viper DS4 and DS4P security systems

• Kicker HS10 180W RMS Single Loaded 10-Inch Hideaway Series Powered Subwoofer Enclosure
• Convenient wired remote for independent bass level control
• 8 Gauge Premium CCA complete 2-channel amplifier wiring kit with RCA
• Premium polyurethane foam can insulator sleeve koozie with black logo
• Complete bass solution includes compact powered subwoofer and installation hardware

• 2-Channel 6000 Series RCA Interconnect Cable
• 3 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Blue Protective Jacket
• Mylar Shielding
• Split-Tip Connector
• Molded Strain Reliefs

• 12" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Wired Bass Remote Controller
• Compatible with AudioControl Epicenter Micro and AudioControl EPICENTER MICRO PRO
• Dash-mountable or center-console installation
• Color: Black

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• Wired Bass Remote Controller
• Compatible with select AudioControl processors
• Dash-mountable or center-console installation
• Color: Black

• 2-Way Remote Car Starter
• 5-Button LCD Transmitter
• 3000 feet of range (0.56 miles)
• Multi-vehicle functionality

• 50 watts x 4 channel @ 4 ohm
• @ 2 ohm
• Bridged: @ 4 ohm
• Total RMS Power: 200 watts
• Class 4 ohm Stable 4-Channel Amplifier

• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.63"
• Sensitivity: 83.24 dB

• Install Bay Diode
• 1 AMP
• Package of 20 Diodes

• Universal dual-screw monitor mount
• 4" slightly curved neck from mounting surface
• Mounts to any flat surface

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• Swivel Mount Fixture
• For PS650-VeX models
• Designed to mount two VeX Pods
• Patented and American-made by Axia Alloys
• Inner diameter of 1.750"

• Swivel Mount for MB Quart Speakers
• Fits NT1, NT2, NHT1 Speakers
• Lock Nut Secures Adjustments
• Attaches Between Speaker Pod and Mounting Bracket
• Sold Individually

• Double-DIN Dash Kit
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 4-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Swivel mount clamp for ETXv3 tower speakers
• Designed to fit tower speakers or roll bars
• Sold as pair (2 swivel mount clamps)
• Inner clamp diameter: 2" (50.8mm)

• 1/0 Gauge 6000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 4000 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• Peak Power: 600 watts
• Built-in D amplifier
• Weatherproof IPX-5 Rating
• (2) 8" 2-way Coaxial speakers
• (2) 1" Balanced Dome Titanium Tweeters
• AUX input for smartphones and MP3

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 12-volt Absorbent Glass Mat (AGM) Secondary Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 750W car audio stereo systems
• Compatible with most vehicle applications

• (2) 1/0 AWG - 10 AWG plus (2) 4 AWG - 10 AWG Out
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
• Nickel finish for durability

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: White

• For use with aftermarket sound systems or accessories like wenches
• Industrial-strength quadruple fuse holder
• Stainless steel hardware
• Also works in marine applications

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 135 Amp Circuit Breaker
• Push Button Reset/Kill Switch
• Water resistant housing
• Protective rubber bolts caps
• Easily mount on firewall or other panels

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 2 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 18" SoloX Series Dual 2-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 2-ohm
• Alignment shims are included for installation

• 12-volt Lithium Racing Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Ideal use for stock or aftermarket alternators
• Includes XS Power Li1208 IntelliCharger

• Accepts 4 AWG or 8 AWG wire
• Custom tooled solid brass
• HPP plating for superior corrosion resistance
• Platinum Finish

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 1.00"
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• 50 watts x 8 channel @ 4 ohm
• 100 watts x 8 channel @ 2 ohm
• Bridged: 200 watts x 4 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 8-Channel Amplifier

• Digital LED lights Bluetooth controller
• IOS and Android Compatible via DS18 LC App
• Bluetooth supports 100 ft. range
• IP66 marine rated; withstands harsh environment

• 700 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• Media Master Remote controller cable
• 6-foot Extension Cable

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• 25 ft. 12 Gauge Premium Series Speaker Cable
• Multi-speaker cable for long runs up to 4 Channels
• Ninth conductor can be used for remote turn-on connection
• OFC Copper for flexibility and conductivity

• 2-Channel Ground Loop Isolator
• Eliminates Noise and Static

• Complete 1/0 Gauge Amplifier Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• CEA-2015 and BC5W2 Compliant

• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base

• 200 watts x 2 channel @ 4 ohm
• 300 watts x 2 channel @ 2 ohm
• Bridged: 600 watts x 1 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.6 dB

• Multiple Band Radar and Laser Detector
• Long range detection
• 2nd generation false alarm filtering
• Built-in Digital Signal Processing (DSP)
• Sensitivity (SEN) button
• Defender database

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• Dual 1/0-gauge input and output to 4-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• Peak Power: 1350 watts
• RMS Power: 450 watts
• Impedance: Single 2 or 4 ohm
• Glass Fiber Cone
• Rubber Surround
• Mount depth: 6-1/4"
• Sensitivity: 91 dB