Universal-Fit Audio for 2016 Lexus RX450h

---

• Universal fit
• Supports 4 cameras, front, rear, back and sides
• Works on factory and aftermarket radios, factory radios require interface
• Automatically activates when put in reverse or turn signals activated

• 500-amp Relay and Battery Isolator
• High current isolation relay designed for adding a secondary battery
• Prevents primary battery discharge when the vehicle engine is off
• Maximum Contact Rating: 500 amps
• Mechanical Life Cycle: 100000

• Wired Remote Control
• Designed for Marine Environments
• Compatible with Kenwood Marine & In-Dash Head Units
• Includes Mounting Hardware

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 3-3/4"
• Sensitivity: 85.5 dB

• Universal spacers for car speakers
• Includes 2 spacers (screws not included)
• Compatible Speaker Size: 6.5"
• Spacer Thickness: 0.5"

• Marine-rated Y-connector

• Universal Antenna Extender • Extends Antenna 48" (4 ft.)

• 13" Grille Made Specifically for the JL Audio 13W1v2, 13W3v3, or 13TW5 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 1 ohm
• Mount depth: 7.85"
• Sensitivity: 88.30 dB

• 490 watts x 1 channel @ 4 ohm
• 780 watts x 1 channel @ 2 ohm
• 1300 watts x 1 channel @ 1 ohm
• Total RMS Power: 1300 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Universal spacers for car speakers
• Includes 2 spacers (screws not included)
• Compatible Speaker Size: 5.25" to 6"
• Spacer Thickness: 1"

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• Spade Terminals • 8 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• 5 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Black

• 12-volt Absorbent Glass Mat (AGM) Car Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 4000W audio stereo systems
• Compatible with many Domestic and Japanese vehicles

• 10-pack 4-gauge Heat Shrink
• Protect your cable crimp ends with style
• Color: Black

• 8" Amplified Loaded Subwoofer System
• 120 watts RMS (360 watts Peak)
• Built-In amplifier
• Variable bass boost
• Speaker-Level Inputs
• EBC wired remote bass level control

• Split Loom Tubing
• Diameter: 1/8"
• Length: 100 Ft
• Material Type: Polyethylene
• Exterior Finish: Smooth
• Color: Black

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• 20 feet 8 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• Wired Bass/Treble Remote for select 2007-2025 Punch and Power amplifiers
• Controls bass on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox

• 10.1" High-Resolution Digital LED Backlit Overhead Monitor
• Built-in DVD, USB and HDMI inputs
• Dual channel IR headphone transmitter with 2 headphones
• Display Type: TFT Active Matrix LCD
• Screen Resolution: 1024 x 600

• Works with power wire 8 gauge to 1/0 gauge
• Great for positive or negative connections to your battery
• Forged and machined 360 brass connection
• Elements and set screws have marine-grade, anti-corrosive Stannum plating

Stacking Hardware for Three Slash v2 Amplifiers
• Made With JL Audio High Quality
• Precision Machined
• Colored Black

• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB

• 220 watts x 4 channel @ 4 ohm
• 330 watts x 4 channel @ 2 ohm
• Bridged: 660 watts x 2 channel @ 4 ohm
• Total RMS Power: 1320 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Gauge Reducer Adapter
• 4 Gauge Input to 8 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Chrome Plating

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

• Pair of Bass Blockers For 6" Speakers
• Blocks 0-600 Hz @ 4 Ohm
• Blocks 0-300 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts

• Low Profile Ported Subwoofer System
• 200 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 1" diaphragm for all Pro Mobile tweeters
• Applicable for models: P1T, P175T, P1SRT
• Does not fit Cerwin Vega P75T and P5T tweeters
• East to install, no cutting or drilling required
• Improves high‑frequency performance

• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Rear parking sensors with waterproof connectors
• Audible buzzer with volume adjustment
• Total Number of Sensors: 4
• Detection Distance: 1 feet to 5.9 feet

• Single Knob Surface Mount Housing Pod
• For use with Belva BAWLK, BA2USB or BAVTM

• High Performance Windshield or Glass Mount Amplified Antenna
• Separate AM/FM Amplifiers • Ground wire for noise-cancellation
• LED Indicator confirms amplifier operation

• OEM Alarm Shock Sensor Upgrade Kit
• Allows factory alarm systems to detect impacts to the vehicle
• Designed to interface for factory alarms extra sensor input

• Super Tweeter
• 100 watts RMS Each
• 8 ohm Impedance

• Designed to connect in-dash receiver wiring harness to vehicle wiring harness

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 800 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• CEA-2015 and BC5W2 Compliant

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Black

• 400 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 1-Way Remote Start, Keyless Entry and Car Alarm System
• Includes (2) 4-button LED remote control transmitter
• 1/4 mile (1320 ft) range
• Antenna with integrated valet switch and LED

• 9 Conductor 18 Gauge Speaker Wire
• Nine Cables In One
• Flexible Jacketing • Ideal For 4-Channel Amplifiers
• Easy Installation

• Passive Crossover
• 250W Max and 125W RMS
• Dual Woofer Outputs
• Includes Mounting Hardware
• Designed for Punch Pro Midrange Drivers and Tweeters

• Use to connect multiple MediaMaster Remote Controllers
• 2-way Y-splitter

• Ported enclosure with 4 12" Solo-Baric L7R Series Subwoofer
• 2400 watts RMS (4800 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 28" L x 20-1/4" H x 35-7/8" W

• 350 watts x 2 channel @ 4 ohm
• 510 watts x 2 channel @ 2 ohm
• 900 watts x 2 channel @ 1 ohm
• Bridged: 1020 watts x 1 channel @ 4 ohm
• 1000 watts @ 2 ohm
• Total RMS Power: 900 watts
• Class D 1 ohm Stable 2-Channel-Channel Amplifier

• Peak Power: 800 watts
• RMS Power: 200 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• Treated Foam Surround
• Mount depth: 3.54"
• Sensitivity: 83.1 dB

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 12" Amplified Loaded Subwoofer System
• 150 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 5/6-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Wired bass remote controller for Kicker CX series amplifiers
• Works with DX or PX series amplifiers with remote bass jack
• Includes 19.5 ft. cable and mounting accessories