Universal-Fit Audio for 2018 Ram 2500

---

• 1.0 Farad Power Capacitor
• Perfect for Systems up to 1000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• Switchable Positive or Negative Trigger
• Slim and Compact Design
• Plug and Play Connection

• 10" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2 cubic feet
• Compatible for Sundown SA10V2 and similar subwoofers (Sold separately)

• RMS Power: 700 watts
• Impedance: Single 4 ohm
• Paper Fiber with Mica Coating Cone
• Rubber Surround
• Mount depth: 5.32"
• Sensitivity: 83.7199 dB

• Door Lock Relay Module with Resistors DEI 451M
• Compatible with most Directed Electronics systems
• 3-Pin Plug Interface with DEI system
• Will interface with most electric power door lock systems drawing 30A or less

• Peak Power: 1300 watts
• RMS Power: 350 watts
• Impedance: Single 4 ohm
• IMPP - Aramid Fiber and Carbon Fiber Cone
• Rubber Surround
• Mount depth: 3-1/4"
• Sensitivity: 76 dB

• 8" Amplified Loaded Subwoofer System
• 120 watts RMS (360 watts Peak)
• Built-In amplifier
• Variable bass boost
• Speaker-Level Inputs
• EBC wired remote bass level control

• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 4.92"
• Sensitivity: 85 dB

• 100A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• Dual Zone Proximity Sensor
• Dual zone sensing
• Protects both inside and outside of the vehicle
• Each zone is independently adjustable
• LED sensitivity test light
• Pre-wired 4-pin plug allows easy connection to all Omega systems

• True Spec 16 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Twisted-pair technology eliminates noise

• Ring Terminals
• 3/8" Opening
• 4 Gauge
• 3 Red & 2 Black
• Nickel Plated
• Resealable Polybag

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• Universal amplifier turn on/off timer
• Easy 4 wire installation
• Color coded wires

• 1-Way 5-Button Replacement LED Remote
• Up to 1500 feet of range (0.28 miles)
• Replacement remote for SP-402

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• Premium 1080p HD Night Vision Dash Camera Bundle
• Includes 1 front and 1 rear camera
• Records in full 1080p HD at 30 FPS with a140-degree field of view
• Continuous recording, incident recording, incident continuous recording for BCWS
• Manual recording and parking mode recording modes
• Front collision, lane departure and front car movement warning alerts
• Built-in WiFi and GPS
• Compatible with select Alpine receivers

• 1-Way Keyless Entry Car Alarm System
• 4-Button Transmitter
• 1/4 mile (1320 feet) range

• Single or Multi-Tone Siren
• Six Tone Siren
• 20 watt Output

• Front and rear parking sensors with waterproof connectors
• Audible buzzer with volume adjustment
• Total Number of Sensors: 8
• Detection Distance: 1 feet to 5.9 feet

• Extension cable perfect when installing an FM modulated multi-disc CD changer, or other FM modulated tuner like a Satellite Radio box
• Also works with hideaway "brain" units from multimedia receivers

• 12-volt Absorbent Glass Mat Car Audio Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 4800W car audio stereo systems
• Left positive terminal

• Portable Automatic Smart Lithium Standard Voltage Maintainer
• Lithium Lifepo4 Battery Maintainer 3.5 Amp
• Designed for charging 12 volts batteries
• Shuts off when the battery is charged
• Can be used as a "Maintainer" for all lifepo4 batteries

• 4" Pro-Audio Bullet Tweeters
• 480 watts Peak Each
• 240 watts RMS Each
• 8 ohm Impedance

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 10.88"
• Sensitivity: 80.6 dB

• 5-pin RGBW Hardwire Pigtail Adapter
• Designed for use with RGBW-CB1 controller (Sold separately)
• Cable Length: 6 inches

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 2-Way Remote Start, Keyless Entry and Car Alarm LCD Transmitter
• Includes (1) 5-button LCD transmitter
• 1 mile range
• Compatible with Viper security systems

• Ported enclosure with 2 12" Solo-Baric L7S Series Subwoofer
• 1500 watts RMS (3000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 16" H x 16-1/4" W x 19-1/2" W2

• 10-pack 1/0-gauge Heat Shrink
• Protect your cable crimp ends with style
• Color: Black

8" Grille made specifically for the JL Audio 8W1v2, 8W1v3, 8W3v3 Sub • Provides the Best Protection Possible • Top-Notch JL Audio Quality • Metal Mesh Grille Painted Black

• OBD2 plug in Bluetooth wireless bootloader
• Combines XKLOADER2 and XKLOADER3 functionality
• Supports DS4 echosystem Bluetooth flashing
• Includes all harness and programming tools necessary

• 8" Marine Subwoofer Grille
• White SW grille design
• REVO 8 FA marine subwoofers sold separately

• 80 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Push button reset can also be used as a kill switch
• Easily mount on firewall or other panel

• 420 watts x 1 channel @ 4 ohm
• 760 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• JL Audio Tower Speaker Mounting Kit
• Clamp is intended for Surface/deck Mounting and Four Winns mounting only
• For M-Series and MX-Series JL Audio Tower Speakers

• Allows aftermarket actuators to work with cable door lock systems
• Each kit operates two doors
• Does not include actuators
• Includes module, wiring harness and installation guide

• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• For Ultra-luxury high-end vehicles
• 12-24V universal usage
• Environmentally friendly and flame retardant materials
• Suitable for refit control of all equipment in the car
• Output short-circuit protection, overload protection
• Suitable for installation and use of all 12/24v battery vehicles

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Pressed Paper Cone
• Double-Stitched Surround
• Mount depth: 5.71"
• Sensitivity: 78.14 dB

• 10" Stamped Mesh Subwoofer Grille
• Protects Against Damage
• Fits 3rd Generation P2 and P3
• Stamped Mesh Grille Insert

• 1 input for 2 output video signal splitter
• Hard aluminum body to protect the device
• Filters out incoming noises
• Small and compact size

• Aluminum diaphragm recone kit
• Designed for Kicker ST3TW bullet tweeter
• Field replaceable - no glue required.

• 50 feet 1/0 gauge Power Wire
• CCA (Copper-Clad Aluminum) material
• Ultra flexible CCA cable construction
• Color: Matte Blue

• Peak Power: 1000 watts
• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 6"
• Sensitivity: 91 dB

• Replacement Amplified Hide-Away Antenna for AM/FM Bands
• Active Magnetic-Type Antenna
• Works on the Magnetic Field

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Computer-designed CNC cut

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 5.625"
• Sensitivity: 83.5 dB

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• 2-Way 5-Button Replacement LCD Remote
• Up to 3000 feet of range (0.56 miles)
• Replacement remote for SP-502

• Ultra-Compact Battery Connector, Positive or Negative
• 10 - 4 Gauge
• High-Temperature Polycarbonate Cover
• Marine-Grade Stannum Plating

• Marine Grade Bluetooth Audio Controller/Receiver
• Designed for marine and powersports applications
• Bluetooth version 4.0
• Delivers CD-like sound quality wirelessly
• Membrane Switchpad

• Spade Terminals
• 4 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• Empty Single 4" Universal Speaker Pods
• Durable ABS plastic enclosure construction
• Versatile use for cars, motorcycles, and extreme terrain vehicles

• Wired Bass Remote for select 2013-2025 Punch and Power amplifiers
• Includes bass knob, cable, mounting clip, mounting screws
• Controls level on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox

• 100 watts x 4 channel + 315 watts x 1 channel @ 4 ohm
• 150 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Weatherproof IPX 5 soundbar
• 1" Pair of Horn Loaded Tweeters
• 3" Pairs of Full-Range Speakers
• Built-in Class-D Amplifier
• Adjustable Clamps fit bars from 1.75" to 2"